Overview
Cat® Heavy Duty Buckets for Backhoe Loaders are well suited for semi-rocky soil or where hard bank material must be broken out and removed.
Capacity | 200 l7 ft³ |
Tip Radius | 1144 mm45 in |
Interface Type | Pin lock |
Width | 463 mm18 in |
Weight | 250 kg551 lb |
Minimum Power | 8.2 kW11 HP |
Maximum Power | 10.2 kW13.7 HP |
Base Edge Thickness | 32 mm1.3 in |
Bore | 67 mm2.64 in |
Stroke | 72 mm2.83 in |
Displacement | 0.5 l31 in³ |
Aspiration | Naturally aspirated |
Rotation from Flywheel End | Anti-clockwise |
Dry Weight | 57 kg126 lb |
Height | 523 mm20.6 in |
Length | 407 mm16 in |
Width | 371 mm14.6 in |
Combustion System | Indirect injection |
Compression Ratio | 23.5:1 |
Cooling System | Liquid |
Cycle | 4 stroke |
Number of Cylinders | 2 inline |
Total Coolant Capacity | 1.1 l0.3 gal (US) |
Total Lubricating Capacity | 2 l0.5 gal (US) |
Maximum Torque | 29.7 Nm @ 2200 rpm21.9 lb-ft @ 2400 rpm |
Rated Speed | 2800-3600 rpm |
463 mm (18 in) Pin Lock Standard Equipment
- Air inlet system
- Cast iron exhaust manifold - side outlet
- Inlet manifold
- Control system
- 12 volt alternator
- 12 volt starter motor
- Electronic Shut Off Solenoid (ESOS)
- Cooling system
- Coolant pump belt driven
- Coolant temperature switch
- Cooling fan
- Fuel system
- Fuel injection pump
- Spin on fuel filter
- General
- Cast iron engine block
- Closed circuit breather
- Glow plug starting aid
- Cold start capability to –20°C (-4°F) (aided)
- Gradeability 35° continuous
- Oil system
- Lubricating oil pressure switch
- Lubricating oil sump
- Spin on lubricating oil filter
Specifications
Capacity | 200 l7 ft³ |
Tip Radius | 1144 mm45 in |
Interface Type | Pin lock |
Width | 463 mm18 in |
Weight | 250 kg551 lb |
Minimum Power | 8.2 kW11 HP |
Maximum Power | 10.2 kW13.7 HP |
Base Edge Thickness | 32 mm1.3 in |
Bore | 67 mm2.64 in |
Stroke | 72 mm2.83 in |
Displacement | 0.5 l31 in³ |
Aspiration | Naturally aspirated |
Rotation from Flywheel End | Anti-clockwise |
Dry Weight | 57 kg126 lb |
Height | 523 mm20.6 in |
Length | 407 mm16 in |
Width | 371 mm14.6 in |
Combustion System | Indirect injection |
Compression Ratio | 23.5:1 |
Cooling System | Liquid |
Cycle | 4 stroke |
Number of Cylinders | 2 inline |
Total Coolant Capacity | 1.1 l0.3 gal (US) |
Total Lubricating Capacity | 2 l0.5 gal (US) |
Maximum Torque | 29.7 Nm @ 2200 rpm21.9 lb-ft @ 2400 rpm |
Rated Speed | 2800-3600 rpm |
Equipment
463 mm (18 in) Pin Lock Standard Equipment
- Air inlet system
- Cast iron exhaust manifold - side outlet
- Inlet manifold
- Control system
- 12 volt alternator
- 12 volt starter motor
- Electronic Shut Off Solenoid (ESOS)
- Cooling system
- Coolant pump belt driven
- Coolant temperature switch
- Cooling fan
- Fuel system
- Fuel injection pump
- Spin on fuel filter
- General
- Cast iron engine block
- Closed circuit breather
- Glow plug starting aid
- Cold start capability to –20°C (-4°F) (aided)
- Gradeability 35° continuous
- Oil system
- Lubricating oil pressure switch
- Lubricating oil sump
- Spin on lubricating oil filter
Related Products