D9R

Overview

Engineered for demanding work. The D9R's durable construction is made for tough working conditions. It keeps material moving with the reliability and low operating costs you expect from Cat dozers.
EmissionsOptional U.S. EPA Tier 1 Equivalent
Note* Excludes all fan losses.
Engine ModelCat® 3408C
Flywheel Power302 kW405 HP
Bore137 mm5.4 in
Stroke152 mm6 in
Displacement18 l1099 in³
Engine Power - Gross Power - SAE J1995*330 kW443 HP
Engine Power - Net Power - SAE J1349/ISO 9249302 kW405 HP
Net Power - SAE J1349/ISO 9249302 kW405 HP
Operating Weight48784 kg107550 lb
Shipping Weight36154 kg79705 lb
1 Forward3.9 km/h2.4 mile/h
2 Forward6.8 km/h4.2 mile/h
3 Forward11.9 km/h7.4 mile/h
1 Reverse4.7 km/h2.9 mile/h
2 Reverse8.4 km/h5.2 mile/h
3 Reverse14.7 km/h9.1 mile/h
1 Forward - Drawbar Pull725000 N163000
2 Forward - Drawbar Pull400000 N90000
3 Forward - Drawbar Pull218000 N49000
Pump TypePiston-type geared from flywheel
Pump Output - Implement239 l/min63.1 gal/min
Tilt Cylinder Flow - Rod End Flow137 l/min36.4 gal/min
Tilt Cylinder Flow - Head End Flow167 l/min44.2 gal/min
Bulldozer Relief Valve Setting26200 kPa3800 psi
Tilt Cylinder Relief Valve Setting19300 kPa2800 psi
Ripper - Lift - Relief Valve Setting26200 kPa3800 psi
Ripper - Pitch - Relief Valve Setting26200 kPa3800 psi
Shoe TypeExtreme Service
Width - Shoe610 mm24 in
Shoes/Side43
Pitch240 mm9.44 in
Ground Clearance596 mm23.4 in
Track Gauge2250 mm88.6 in
Length - Track on Ground3470 mm136.6 in
Ground Contact Area4.24 m²6569 in²
Track Rollers/Side8
Grouser Height - Extreme Service (ES)84 mm3.3 in
Fuel Tank889 l235 gal (US)
Cooling System163 l43 gal (US)
Engine Crankcase*45.5 l12 gal (US)
Power Train164 l43.4 gal (US)
Final Drive - Each15 l3.9 gal (US)
Roller Frames - Each45 l11.9 gal (US)
Pivot Shaft Compartment30 l7.9 gal (US)
Hydraulic Tank77.2 l20.4 gal (US)
Capacity - SAE J126513.5 m³17.7 yd³
Digging Depth606 mm23.9 in
Ground Clearance1422 mm56 in
Height1934 mm6.35 ft
Maximum Tilt940 mm37 in
Total Operating Weight** - With Blade and Single-Shank Ripper48784 kg107550 lb
Weight* - Without Hydraulic Controls6863 kg15130 lb
Width - Over End Bits4310 mm14.14 ft
Capacity - SAE J126516.4 m³21.4 yd³
Digging Depth606 mm23.9 in
Ground Clearance1422 mm56 in
Height1934 mm6.35 ft
Maximum Tilt1014 mm39.9 in
Total Operating Weight** - With Blade and Single-Shank Ripper49392 kg108890.59 lb
Weight* - Without Hydraulic Controls7388 kg16288 lb
Width - Over End Bits4650 mm15.25 ft
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole882 mm/817 mm (34.7 in/32.2 in)
Maximum Penetration - Standard Tip1231 mm/1727 mm (48.5 in/68 in)
Maximum Penetration Force - Shank Vertical158 kN/172 kN (35,520 lbf/38,667 lbf)
Note (1)* Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Note (2)Single-shank ripping arrangement weight includes pin puller.
Number of Shank Holes3-Mar
Overall Beam WidthNA
Pry-Out Force332 kN/331 kN (74,637 lbf/74,412 lbf)
Total Operating Weight* - With SU-Blade and Ripper48784 kg107550 lb
Weight - With One Shank4293 kg/4420 kg (9,464 lb/9,744 lb)
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole879 mm34.6 in
Maximum Penetration - Standard Tip798 mm31.4 in
Maximum Penetration Force - Shank Vertical154 kN34621
Note (1)* Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Number of Shank Holes2
Overall Beam Width1330 mm52.4 in
Pry-Out Force - Multi-Shank Ripper with One Tooth361 kN81156
Total Operating Weight* - With SU-Blade and Ripper48221 kg106309 lb
Weight - With One Shank4153 kg9156 lb
Winch ModelPA140VS
Weight*1790 kg3950 lb
Oil Capacity15 l4 gal (US)
Increased Tractor Length557 mm21.9 in
Drum Width320 mm12.6 in
Wire Cable Diameter - Optional32 mm1.25 in
Wire Cable Diameter - Recommended28 mm1.13 in
Note (1)* Includes blade tilt cylinder.
Note (2)** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.
Note (1)* Includes blade tilt cylinder.
Note (2)** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.
Drawbar Height (Center of Clevis)*765 mm30.1 in
Ground Clearance*596 mm23.4 in
Height - FOPS Cab*3820 mm150.4 in
Height - ROPS/Canopy*4000 mm157.5 in
Height - Top of Stack*4005 mm157.7 in
Length - Basic Tractor - With Drawbar5180 mm204 in
Length - Basic Tractor - With Winch5545 mm218.3 in
Length - Track on Ground3470 mm136.6 in
Length - With Multi-Shank Ripper6538 mm257.4 in
Length - With SU-Blade**6880 mm270.9 in
Length - With Single-Shank Ripper6529 mm257 in
Length - With U-Blade6967 mm274.3 in
Note (1)*Includes grouser height for total dimensions on hard surfaces.
Note (2)**Includes drawbar.
Overall Length - Basic Tractor4910 mm193.3 in
Overall Length - SU-Blade/SS Ripper8230 mm324 in
Track Gauge2250 mm88.6 in
Width - Over Trunnions3300 mm129.9 in
Width - Without Trunnions - Standard Shoe2880 mm113.4 in
Engine Power - EU 80/1269302 kW405 HP
Note (1)Capable of meeting U.S. EPA Tier 1 Equivalent.
Note (2)Engine ratings apply at 1,900 rpm.
Note (3)Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (4)No derating required up to 2286 m (7,500 ft) altitude.
Note (1)Implement Pump output measured at 1,900 rpm and 6895 kPa (1,000 psi).
Note (2)Complete system consists of pump, tank with filter, valves, lines, linkage and control levers.
Note (2)+Includes (1) shank, add 347 kg for each additional shank.
Note* With oil filters.
FOPSFOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II.
NoteHearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment.
ROPSROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
SoundThe declared dynamic operator sound pressure level is 85 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed.
NotePositive Pin Retention Track.
Note (1)Operating Weight: Includes clutch/brake arrangement, lubricant, coolant, 100% fuel, hydraulic controls and fluids, 610 mm (24 in) extreme service shoes, SU-Blade, single-shank ripper, ROPS, FOPS cab and operator.
Note (2)Shipping Weight: Includes clutch/brake arrangement, lubricants, coolant, 20% fuel and ROPS, FOPS cab and 610 mm (24 in) extreme service shoes.
Maximum Drum Capacity - Optional Cable Length62 m204 ft
Maximum Drum Capacity - Recommended Cable Length78 m257 ft
Note (1)* Weight: Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Note (2)Variable speed, hydraulically driven, dual braking system, three‑roller fairlead.
Wire Cable Ferrule Size - Length70 mm2.8 in
Wire Cable Ferrule Size - Outside Diameter60 mm2.4 in
BrakesBrakes meet the standard ISO 10265.

D9R Standard Equipment

  • ELECTRICAL
    • Alternator, 75 amp
    • Back-up alarm
    • Batteries, 12-volt (2), 190 amp-hour
    • Converter, 10-volt, 10 amp
    • Horn, forward warning
    • Lighting system: – Two on fender facing forward – Two on fender facing rearward – Two on top of the lift cylinders
    • Starting receptacle
  • OPERATOR ENVIRONMENT
    • Canopy, ROPS/FOPS
    • Cat D9R Monitoring System
    • Decelerator and governor control
    • Heater
    • Hydraulic control lever restraints
    • Hydraulic system, four valve
    • Mirror, rearview
    • Seat, cloth with mechanical suspension
    • Seat belt, retractable 76 mm (3 in)
  • UNDERCARRIAGE
    • 610 mm (24 in) extreme service grouser with sealed and lubricated PPR track (43 section)
    • Lifetime lubricated rollers and idlers
    • Pinned equalizer bar with remote greasing location
    • Sprocket rim segments, replaceable
    • Suspension-type undercarriage, eight-roller tubular track roller frame
    • Track adjusters, hydraulic
    • Track guides
    • Two-piece master links
  • POWER TRAIN
    • 3408C DITA diesel engine
    • Advanced Modular Cooling System (AMOCS)
    • Blower fan
    • Clutch-brake with combined steering and brake control levers
    • Coolant, extended life
    • Drains, ecology fluid
    • Final drives, three planet double reduction planetary
    • Fuel priming pump
    • Muffler
    • Power shift transmission (3F/3R)
    • Precleaner with dust ejector
    • Prescreener
    • Separator, water/fuel
    • Thermal shield
    • Torque divider
  • OTHER STANDARD EQUIPMENT
    • CD ROM parts book
    • Engine enclosure
    • Guards – bottom, hinged extreme service with front towing device
    • Hinged radiator guard doors
    • Load sensing hydraulics
    • Mounting, lift cylinders
    • Rain cap
    • Service instructions, international
    • Vandalism protection (8 caplocks)

D9R Optional Equipment

  • ELECTRICAL
    • Alternator, 105 amp
    • Battery: – Arctic (includes four batteries) – Heavy Duty (includes four batteries)
    • Converter, 24-volt to 12-volt (includes 20 amp converter)
    • Lights, 10 halogen: – Two on fender facing forward – Two on fender facing rearward – Four on top of lift cylinders – Two on sides of ROPS facing rearward
  • GUARDS
    • Dozer lines
    • Fuel tank
    • Rear screen
    • Undercarriage idlers
  • OPERATOR ENVIRONMENT
    • Air conditioner (under hood, fender or ROPS)
    • Cab (standard, arctic or steel mill)
    • Seat: – Vinyl seat with mechanical suspension – Cloth seat with air suspension
  • POWER TRAIN
    • 3408C, U.S. EPA Tier 1 Equivalent
    • Coolant – arctic
    • Ether starting aid
    • Fan: – Desert – Reversible
    • Fast fuel system
    • Final drives: – Guarded – Cold weather – Steel mill
    • Grid, radiator core protector: – Grid, coated radiator core protector
    • Lubrication: – Arctic – High ambient – Steel mill
    • Precleaner, turbine or turbine with screen
    • Prelube engine
    • Radiator: – Copper-nickel (in conditions with airborne abrasive materials) – High ambient
  • UNDERCARRIAGE
    • Tracks, PPR, sealed and lubricated
    • 560 mm (22 in) Extreme Service
    • 610 mm (24 in) Extreme Service circular holes
    • 610 mm (24 in) Super Extreme Service
    • 610 mm (24 in) Super Extreme Service Steel Mill
    • 685 mm (27 in) Extreme Service
    • 685 mm (27 in) Extreme Service circular holes
    • 685 mm (27 in) Super Extreme Service
    • 760 mm (30 in) Moderate Service
    • Carrier rollers
    • Carrier rollers, cold weather
    • Undercarriage arrangements: – Cold weather – Steel mill
  • SPECIAL ARRANGEMENTS
    • Arctic
    • Desert
    • Heavy construction
    • Steel mill
  • BULLDOZER ARRANGEMENTS
    • 9SU blade
    • 9SU abrasion resistant blade
    • 9SU abrasion resistant blade, black
    • 9U blade
    • 9U abrasion resistant blade
    • 9U abrasion resistant blade, black
  • HYDRAULIC CONTROLS
    • Dual tilt
  • REAR ATTACHMENTS
    • Counterweight
    • Drawbar rear
    • Single shank ripper
    • Multi shank ripper
    • Multi shank ripper – steel mill
    • Pin puller (single shank only)
    • CapSure Hammerless Installation and Positive Retention System: – Single shank – Multi shank – Single shank deep
    • Winch
  • OTHER ATTACHMENTS
    • Cellular Product Link
    • Fuel lines, heater
    • High speed oil change system
    • Paint: – Black paint on hood and top of radiator guard – Corrosion resistant

Exterior

Interior

Specifications

EmissionsOptional U.S. EPA Tier 1 Equivalent
Note* Excludes all fan losses.
Engine ModelCat® 3408C
Flywheel Power302 kW405 HP
Bore137 mm5.4 in
Stroke152 mm6 in
Displacement18 l1099 in³
Engine Power - Gross Power - SAE J1995*330 kW443 HP
Engine Power - Net Power - SAE J1349/ISO 9249302 kW405 HP
Net Power - SAE J1349/ISO 9249302 kW405 HP
Operating Weight48784 kg107550 lb
Shipping Weight36154 kg79705 lb
1 Forward3.9 km/h2.4 mile/h
2 Forward6.8 km/h4.2 mile/h
3 Forward11.9 km/h7.4 mile/h
1 Reverse4.7 km/h2.9 mile/h
2 Reverse8.4 km/h5.2 mile/h
3 Reverse14.7 km/h9.1 mile/h
1 Forward - Drawbar Pull725000 N163000
2 Forward - Drawbar Pull400000 N90000
3 Forward - Drawbar Pull218000 N49000
Pump TypePiston-type geared from flywheel
Pump Output - Implement239 l/min63.1 gal/min
Tilt Cylinder Flow - Rod End Flow137 l/min36.4 gal/min
Tilt Cylinder Flow - Head End Flow167 l/min44.2 gal/min
Bulldozer Relief Valve Setting26200 kPa3800 psi
Tilt Cylinder Relief Valve Setting19300 kPa2800 psi
Ripper - Lift - Relief Valve Setting26200 kPa3800 psi
Ripper - Pitch - Relief Valve Setting26200 kPa3800 psi
Shoe TypeExtreme Service
Width - Shoe610 mm24 in
Shoes/Side43
Pitch240 mm9.44 in
Ground Clearance596 mm23.4 in
Track Gauge2250 mm88.6 in
Length - Track on Ground3470 mm136.6 in
Ground Contact Area4.24 m²6569 in²
Track Rollers/Side8
Grouser Height - Extreme Service (ES)84 mm3.3 in
Fuel Tank889 l235 gal (US)
Cooling System163 l43 gal (US)
Engine Crankcase*45.5 l12 gal (US)
Power Train164 l43.4 gal (US)
Final Drive - Each15 l3.9 gal (US)
Roller Frames - Each45 l11.9 gal (US)
Pivot Shaft Compartment30 l7.9 gal (US)
Hydraulic Tank77.2 l20.4 gal (US)
Capacity - SAE J126513.5 m³17.7 yd³
Digging Depth606 mm23.9 in
Ground Clearance1422 mm56 in
Height1934 mm6.35 ft
Maximum Tilt940 mm37 in
Total Operating Weight** - With Blade and Single-Shank Ripper48784 kg107550 lb
Weight* - Without Hydraulic Controls6863 kg15130 lb
Width - Over End Bits4310 mm14.14 ft
Capacity - SAE J126516.4 m³21.4 yd³
Digging Depth606 mm23.9 in
Ground Clearance1422 mm56 in
Height1934 mm6.35 ft
Maximum Tilt1014 mm39.9 in
Total Operating Weight** - With Blade and Single-Shank Ripper49392 kg108890.59 lb
Weight* - Without Hydraulic Controls7388 kg16288 lb
Width - Over End Bits4650 mm15.25 ft
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole882 mm/817 mm (34.7 in/32.2 in)
Maximum Penetration - Standard Tip1231 mm/1727 mm (48.5 in/68 in)
Maximum Penetration Force - Shank Vertical158 kN/172 kN (35,520 lbf/38,667 lbf)
Note (1)* Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Note (2)Single-shank ripping arrangement weight includes pin puller.
Number of Shank Holes3-Mar
Overall Beam WidthNA
Pry-Out Force332 kN/331 kN (74,637 lbf/74,412 lbf)
Total Operating Weight* - With SU-Blade and Ripper48784 kg107550 lb
Weight - With One Shank4293 kg/4420 kg (9,464 lb/9,744 lb)
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole879 mm34.6 in
Maximum Penetration - Standard Tip798 mm31.4 in
Maximum Penetration Force - Shank Vertical154 kN34621
Note (1)* Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Number of Shank Holes2
Overall Beam Width1330 mm52.4 in
Pry-Out Force - Multi-Shank Ripper with One Tooth361 kN81156
Total Operating Weight* - With SU-Blade and Ripper48221 kg106309 lb
Weight - With One Shank4153 kg9156 lb
Winch ModelPA140VS
Weight*1790 kg3950 lb
Oil Capacity15 l4 gal (US)
Increased Tractor Length557 mm21.9 in
Drum Width320 mm12.6 in
Wire Cable Diameter - Optional32 mm1.25 in
Wire Cable Diameter - Recommended28 mm1.13 in
Note (1)* Includes blade tilt cylinder.
Note (2)** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.
Note (1)* Includes blade tilt cylinder.
Note (2)** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.
Drawbar Height (Center of Clevis)*765 mm30.1 in
Ground Clearance*596 mm23.4 in
Height - FOPS Cab*3820 mm150.4 in
Height - ROPS/Canopy*4000 mm157.5 in
Height - Top of Stack*4005 mm157.7 in
Length - Basic Tractor - With Drawbar5180 mm204 in
Length - Basic Tractor - With Winch5545 mm218.3 in
Length - Track on Ground3470 mm136.6 in
Length - With Multi-Shank Ripper6538 mm257.4 in
Length - With SU-Blade**6880 mm270.9 in
Length - With Single-Shank Ripper6529 mm257 in
Length - With U-Blade6967 mm274.3 in
Note (1)*Includes grouser height for total dimensions on hard surfaces.
Note (2)**Includes drawbar.
Overall Length - Basic Tractor4910 mm193.3 in
Overall Length - SU-Blade/SS Ripper8230 mm324 in
Track Gauge2250 mm88.6 in
Width - Over Trunnions3300 mm129.9 in
Width - Without Trunnions - Standard Shoe2880 mm113.4 in
Engine Power - EU 80/1269302 kW405 HP
Note (1)Capable of meeting U.S. EPA Tier 1 Equivalent.
Note (2)Engine ratings apply at 1,900 rpm.
Note (3)Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (4)No derating required up to 2286 m (7,500 ft) altitude.
Note (1)Implement Pump output measured at 1,900 rpm and 6895 kPa (1,000 psi).
Note (2)Complete system consists of pump, tank with filter, valves, lines, linkage and control levers.
Note (2)+Includes (1) shank, add 347 kg for each additional shank.
Note* With oil filters.
FOPSFOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II.
NoteHearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment.
ROPSROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
SoundThe declared dynamic operator sound pressure level is 85 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed.
NotePositive Pin Retention Track.
Note (1)Operating Weight: Includes clutch/brake arrangement, lubricant, coolant, 100% fuel, hydraulic controls and fluids, 610 mm (24 in) extreme service shoes, SU-Blade, single-shank ripper, ROPS, FOPS cab and operator.
Note (2)Shipping Weight: Includes clutch/brake arrangement, lubricants, coolant, 20% fuel and ROPS, FOPS cab and 610 mm (24 in) extreme service shoes.
Maximum Drum Capacity - Optional Cable Length62 m204 ft
Maximum Drum Capacity - Recommended Cable Length78 m257 ft
Note (1)* Weight: Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Note (2)Variable speed, hydraulically driven, dual braking system, three‑roller fairlead.
Wire Cable Ferrule Size - Length70 mm2.8 in
Wire Cable Ferrule Size - Outside Diameter60 mm2.4 in
BrakesBrakes meet the standard ISO 10265.

Equipment

D9R Standard Equipment

  • ELECTRICAL
    • Alternator, 75 amp
    • Back-up alarm
    • Batteries, 12-volt (2), 190 amp-hour
    • Converter, 10-volt, 10 amp
    • Horn, forward warning
    • Lighting system: – Two on fender facing forward – Two on fender facing rearward – Two on top of the lift cylinders
    • Starting receptacle
  • OPERATOR ENVIRONMENT
    • Canopy, ROPS/FOPS
    • Cat D9R Monitoring System
    • Decelerator and governor control
    • Heater
    • Hydraulic control lever restraints
    • Hydraulic system, four valve
    • Mirror, rearview
    • Seat, cloth with mechanical suspension
    • Seat belt, retractable 76 mm (3 in)
  • UNDERCARRIAGE
    • 610 mm (24 in) extreme service grouser with sealed and lubricated PPR track (43 section)
    • Lifetime lubricated rollers and idlers
    • Pinned equalizer bar with remote greasing location
    • Sprocket rim segments, replaceable
    • Suspension-type undercarriage, eight-roller tubular track roller frame
    • Track adjusters, hydraulic
    • Track guides
    • Two-piece master links
  • POWER TRAIN
    • 3408C DITA diesel engine
    • Advanced Modular Cooling System (AMOCS)
    • Blower fan
    • Clutch-brake with combined steering and brake control levers
    • Coolant, extended life
    • Drains, ecology fluid
    • Final drives, three planet double reduction planetary
    • Fuel priming pump
    • Muffler
    • Power shift transmission (3F/3R)
    • Precleaner with dust ejector
    • Prescreener
    • Separator, water/fuel
    • Thermal shield
    • Torque divider
  • OTHER STANDARD EQUIPMENT
    • CD ROM parts book
    • Engine enclosure
    • Guards – bottom, hinged extreme service with front towing device
    • Hinged radiator guard doors
    • Load sensing hydraulics
    • Mounting, lift cylinders
    • Rain cap
    • Service instructions, international
    • Vandalism protection (8 caplocks)

D9R Optional Equipment

  • ELECTRICAL
    • Alternator, 105 amp
    • Battery: – Arctic (includes four batteries) – Heavy Duty (includes four batteries)
    • Converter, 24-volt to 12-volt (includes 20 amp converter)
    • Lights, 10 halogen: – Two on fender facing forward – Two on fender facing rearward – Four on top of lift cylinders – Two on sides of ROPS facing rearward
  • GUARDS
    • Dozer lines
    • Fuel tank
    • Rear screen
    • Undercarriage idlers
  • OPERATOR ENVIRONMENT
    • Air conditioner (under hood, fender or ROPS)
    • Cab (standard, arctic or steel mill)
    • Seat: – Vinyl seat with mechanical suspension – Cloth seat with air suspension
  • POWER TRAIN
    • 3408C, U.S. EPA Tier 1 Equivalent
    • Coolant – arctic
    • Ether starting aid
    • Fan: – Desert – Reversible
    • Fast fuel system
    • Final drives: – Guarded – Cold weather – Steel mill
    • Grid, radiator core protector: – Grid, coated radiator core protector
    • Lubrication: – Arctic – High ambient – Steel mill
    • Precleaner, turbine or turbine with screen
    • Prelube engine
    • Radiator: – Copper-nickel (in conditions with airborne abrasive materials) – High ambient
  • UNDERCARRIAGE
    • Tracks, PPR, sealed and lubricated
    • 560 mm (22 in) Extreme Service
    • 610 mm (24 in) Extreme Service circular holes
    • 610 mm (24 in) Super Extreme Service
    • 610 mm (24 in) Super Extreme Service Steel Mill
    • 685 mm (27 in) Extreme Service
    • 685 mm (27 in) Extreme Service circular holes
    • 685 mm (27 in) Super Extreme Service
    • 760 mm (30 in) Moderate Service
    • Carrier rollers
    • Carrier rollers, cold weather
    • Undercarriage arrangements: – Cold weather – Steel mill
  • SPECIAL ARRANGEMENTS
    • Arctic
    • Desert
    • Heavy construction
    • Steel mill
  • BULLDOZER ARRANGEMENTS
    • 9SU blade
    • 9SU abrasion resistant blade
    • 9SU abrasion resistant blade, black
    • 9U blade
    • 9U abrasion resistant blade
    • 9U abrasion resistant blade, black
  • HYDRAULIC CONTROLS
    • Dual tilt
  • REAR ATTACHMENTS
    • Counterweight
    • Drawbar rear
    • Single shank ripper
    • Multi shank ripper
    • Multi shank ripper – steel mill
    • Pin puller (single shank only)
    • CapSure Hammerless Installation and Positive Retention System: – Single shank – Multi shank – Single shank deep
    • Winch
  • OTHER ATTACHMENTS
    • Cellular Product Link
    • Fuel lines, heater
    • High speed oil change system
    • Paint: – Black paint on hood and top of radiator guard – Corrosion resistant

360° Interactive

Exterior

Interior

Related Products

Loading