7495 with HydraCrowd

Overview

Electric rope shovels have been successfully removing overburden and ore on mine sites around the world for more than a century. Driven by a vision to make these highly productive machines safer, more reliable and even more productive, we challenged the status quo and built an electric rope shovel that's better.
Dipper Payload109 t120 t
Dipper Capacity30.6-62.7 m3 (40-82 yd3)
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)109 t120 t
NoteDependent on application and material density
Working Weight - With Dipper and Standard Links1390714 kg3066000 lb
Ballast - Furnished By Customer302614 kg667150 lb
Note (1)These weights will vary slightly depending upon dipper and optional equipment selection
Note (2)All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads
Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard11 m36 ft
Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads11.6 m38 ft
Ground Bearing Pressure - NoteGround bearing pressure is dependent upon many factors
Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm/79 in) Treads - Standard36 m2 (382 kPa); 386 ft2 (55 psi)
Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm/102 in) Treads46.6 m2 (298 kPa); 501.7 ft2 (43 psi)
HoistA planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Planetary PropelDual-motor independent drive
SwingTwo planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Upper Works Overall Width - Including Standard Walkways12.8 m41.9 ft
Components (1)Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
TypeAutomatic, single-line system for open gear lubricant and grease
DriveIGBT Acutrol drive system
Power Requirements - 50 Hz6,000V, 6,600V, 7,200V, 11,000V
Power Requirements - 60 Hz7,200V, 13,800V
Power Requirements - Average Power Demand945-1322 kW
Power Requirements - NoteOther voltage options available to suit customer requirements
Power Requirements - Peak power3778 kW
Power Requirements - Voltage3 phase, 50/60 Hz, 7,200V
System Voltage - Nominal50/60 Hz, 7,200V
Crowd (1)HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
Crowd (2)(Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Rope Data - Boom Suspension - Diameter83 mm3.25 in
Rope Data - Boom Suspension - No.4
Rope Data - Dipper Trip - Diameter19 mm0.75 in
Rope Data - Dipper Trip - No.1
Rope Data - Hoist - Diameter70 mm2.75 in
Rope Data - Hoist - No.2
Rope Data - NoteHigh impact ropes available as an option
TypeOne piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Dipper Capacities30.6-62.7 m3 (40-82 yd3)
Dipper Payload109 t120 ton (US)
Maximum Dumping Height8.8 m28.9 ft
Operating Weight1390714 kg3066000 lb
Cutting Height - Maximum16.3 m53.5 ft
Cutting Radius - Maximum24.4 m80 ft
Dumping Height - With Clearance to Open Dipper Door8.8 m28.9 ft
Note (1)Optimal working ranges based on loading a Cat 795F AC truck.
Note (2)*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads.
Radius of Level Floor17.1 m56.1 ft
Revolving Frame Tail Swing Radius9.3 m30.5 ft
Components (2)External FastFil from lower level

Exterior

Interior

Specifications

Dipper Payload109 t120 t
Dipper Capacity30.6-62.7 m3 (40-82 yd3)
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)109 t120 t
NoteDependent on application and material density
Working Weight - With Dipper and Standard Links1390714 kg3066000 lb
Ballast - Furnished By Customer302614 kg667150 lb
Note (1)These weights will vary slightly depending upon dipper and optional equipment selection
Note (2)All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads
Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard11 m36 ft
Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads11.6 m38 ft
Ground Bearing Pressure - NoteGround bearing pressure is dependent upon many factors
Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm/79 in) Treads - Standard36 m2 (382 kPa); 386 ft2 (55 psi)
Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm/102 in) Treads46.6 m2 (298 kPa); 501.7 ft2 (43 psi)
HoistA planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Planetary PropelDual-motor independent drive
SwingTwo planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Upper Works Overall Width - Including Standard Walkways12.8 m41.9 ft
Components (1)Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
TypeAutomatic, single-line system for open gear lubricant and grease
DriveIGBT Acutrol drive system
Power Requirements - 50 Hz6,000V, 6,600V, 7,200V, 11,000V
Power Requirements - 60 Hz7,200V, 13,800V
Power Requirements - Average Power Demand945-1322 kW
Power Requirements - NoteOther voltage options available to suit customer requirements
Power Requirements - Peak power3778 kW
Power Requirements - Voltage3 phase, 50/60 Hz, 7,200V
System Voltage - Nominal50/60 Hz, 7,200V
Crowd (1)HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
Crowd (2)(Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Rope Data - Boom Suspension - Diameter83 mm3.25 in
Rope Data - Boom Suspension - No.4
Rope Data - Dipper Trip - Diameter19 mm0.75 in
Rope Data - Dipper Trip - No.1
Rope Data - Hoist - Diameter70 mm2.75 in
Rope Data - Hoist - No.2
Rope Data - NoteHigh impact ropes available as an option
TypeOne piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Dipper Capacities30.6-62.7 m3 (40-82 yd3)
Dipper Payload109 t120 ton (US)
Maximum Dumping Height8.8 m28.9 ft
Operating Weight1390714 kg3066000 lb
Cutting Height - Maximum16.3 m53.5 ft
Cutting Radius - Maximum24.4 m80 ft
Dumping Height - With Clearance to Open Dipper Door8.8 m28.9 ft
Note (1)Optimal working ranges based on loading a Cat 795F AC truck.
Note (2)*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads.
Radius of Level Floor17.1 m56.1 ft
Revolving Frame Tail Swing Radius9.3 m30.5 ft
Components (2)External FastFil from lower level

360° Interactive

Exterior

Interior

Related Products

Loading