Standard Bucket Capacity | Backhoe (heaped 1:1) 8.1 m3 (10.6 yd3) |
Operating Weight | 140 tonnes (154 tons) |
Engine Output - SAE J1995 | 606 kW (813 hp) |
Alternator Rating | 150A (24V) |
Batteries | 4 × 200Ah (12V each) |
Components (1) | Emergency stop in cabin, engine module, pump room and on service station accessible from ground level |
Components (2) | All around lighting |
Components (3) | Four (4) lights on attachment |
Components (4) | Five (5) lights for front |
System Voltage | 24V |
Components (1) | Pressurized operator station with positive filtration |
Components (10) | Radio with MP3 auxiliary audio port |
Components (11) | Two stereo speakers |
Components (12) | Storage shelf suitable for lunch or toolbox |
Components (13) | Color LCD display with warning, filter/fluid change, and working hour information |
Components (14) | Adjustable armrest |
Components (15) | Height-adjustable joystick consoles |
Components (16) | Neutral lever (lock out) for all controls |
Components (17) | Travel control pedals with removable hand levers |
Components (18) | Two power outlets, 10 amp (total) |
Components (19) | Laminated glass front upper window and tempered other windows |
Components (2) | Mirror package |
Components (3) | Sliding upper door window (left-hand cab door) |
Components (4) | Glass-breaking safety hammer |
Components (5) | Removable lower windshield with in cab storage bracket |
Components (6) | Coat hook |
Components (7) | Beverage holder |
Components (8) | Literature holder |
Components (9) | AM/FM radio |
Features (1) | Closed-loop swing circuit with speed control |
Features (2) | Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking |
Maximum Swing Speed | 4.9 r/min4.9 r/min |
Parking Brake | Wet multiple disc brake, spring-loaded/hydraulically released |
Swing Drive | Two (2) compact planetary transmissions with axial piston motors |
Swing Ring | Cross roller bearing with sealed internal gearing |
Components (1) | Forged double-grouser track pads |
Components (2) | Chain links connected by hardened pins and bushings |
Components (3) | Cat D11 Track-Type Tractor links |
Components (4) | All running surfaces of sprockets, idlers, rollers and track chain links hardened |
Components (5) | Fully hydraulic self-adjusting track tensioning system with accumulator |
Components (6) | Automatic hydraulic retarder valve to prevent overspeed on downhill travel |
Gradeability - Travel Drives | Approximately 42% |
Hydraulic Track Tensioning | With accumulator |
Maximum Drawbar Pull - Forward | 858 kN192886 |
Maximum Drawbar Pull - Reverse | 983 kN220987 |
Number of Carrier Rollers - Each Side | 3 |
Number of Shoes - Each Side | 46 |
Number of Track Rollers - Each Side | 9 |
Travel Speed - Two Stages - 1st Stage - Maximum | 2.3 km/h1.3 mile/h |
Travel Speed - Two Stages - 2nd Stage - Maximum | 3.3 km/h2.1 mile/h |
Type (1) | Central bank lubrication system |
Type (2) | Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing |
Type (3) | Standard grease reel on machine for bucket linkage |
Buckets Equipped With | – Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds |
Type (1) | Boom and stick torsion-resistant with welded box design |
Type (2) | High-tensile steel with solid steel castings at pivot areas |
Type (3) | Boom and stick stress-relieved after welding |
Type (4) | Float valve for boom down function |
Ground Pressure | 16.3 N/cm²23.6 psi |
Note | 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick |
Operating Weight | 140 t154 t |
Equipped With (1) | Emergency stop |
Equipped With (2) | Quick couplings for: – Diesel fuel – Grease |
Feature | Accessible from ground level |
Capacity 1:1 | 8.1 m³10.6 yd³ |
Maximum Material Density - Loose | 1.8 t/m³3034 lb/yd³ |
Number of Teeth | 5 |
Total Width | 2682 mm8.8 ft |
Weight - Including Standard Wear Package | 7528 kg16596 lb |
Capacity - Grease Barrel | 68 l18 gal (US) |
Type (4) | Grease refill service point accessible from ground |
Tooth System | Cat C70 penetration tip with CapSure lock |
Bucket Digging Force - ISO | 586 kN131700 |
Bucket Digging Force - SAE | 501 kN112600 |
Stick Digging Force - ISO | 458 kN103000 |
Stick Digging Force - SAE | 439 kN98800 |
Maximum Digging Depth | 7.9 m25.9 ft |
Maximum Digging Height | 13.2 m43.3 ft |
Maximum Digging Reach | 13.9 m45.6 ft |
Maximum Dump Height | 8.7 m28.5 ft |
Standard Bucket Capacity - Backhoe (Heaped 1:1) | 8.1 m³10.6 yd³ |
Gradeability - Travel Drives | Approximately 42% |
Hydraulic Track Tensioning | With accumulator |
Maximum Drawbar Pull - Forward | 858 kN192886 |
Maximum Drawbar Pull - Reverse | 983 kN220987 |
Travel Speed - Two Stages - 1st Stage - Maximum | 2.3 km/h1.4 mile/h |
Travel Speed - Two Stages - 2nd Stage - Maximum | 3.3 km/h2.1 mile/h |
Components (5) | Two (2) lights for left side |
Components (6) | One (1) light for right side |
Components (7) | Two (2) lights for rear end |
Components (8) | One (1) light for machine deck/service |
Components (9) | One (1) beacon light on cabin roof |
Emissions | U.S. EPA Tier 4 Final, Tier 2 Equivalent or Tier 1 Equivalent |
Engine Model | Cat® C27 ACERT™ |
Gross Power - SAE J1995 | 606 kW813 HP |
Net Power - SAE J1349 | 556 kW746 HP |
Aspiration | Turbocharged and aftercooled |
Bore | 137.2 mm5.4 in |
Displacement | 27 l1648 in³ |
Gross Power - SAE J1995 | 606 kW (813 hp 1,800 min-1) |
Maximum Altitude - Without Deration - Above Sea Level | 4420 m14500 ft |
Net Power - SAE J1349 | 556 kW (746 hp 1,800 min-1) |
Number of Cylinders | 12 |
Stroke | 152.4 mm6 in |
Bore | 137.2 mm5.4 in |
Displacement | 27 l1648 in³ |
Gross Power - SAE J1995 | 606 kW (813 hp 1,800 min-1) |
Maximum Altitude - Without Deration - Above Sea Level | 3048 m10000 ft |
Net Power - SAE J1349 | 556 kW (746 hp 1,800 min-1) |
Number of Cylinders | 12 |
Stroke | 152.4 mm6 in |
Engine Fan Pump | 1 × variable swash plate pump |
Engine Fan Pump - Maximum Flow, Engine Fan | 201 l/min53.1 gal/min |
Engine Fan Pump - Maximum Pressure, Engine Fan | 220 bar3191 psi |
Filters (1) | Full-flow high-pressure filters (200 μm) for main pumps |
Filters (2) | Full-flow filters (20 μm) for complete return circuit |
Filters (3) | Pressure filters (16 μm) for servo circuit |
Filters (4) | Full-flow filters (6 μm) for engine cooling return circuit |
Filters (5) | Swing charge filter (15 μm) |
Filters (6) | Pump case return screens (125 μm) |
Hydraulic Fan Pump | 1 × variable swash plate pump |
Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan | 86 l/min22.7 gal/min |
Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan | 135 bar1958 psi |
Hydraulic Oil Cooling - Diameter of Fan | 1016 mm40 in |
Hydraulic Oil Cooling - Maximum Flow | 1075 l/min284 gal/min |
Main Pumps | 3 × variable swash plate pumps |
Main Pumps - Maximum Pressure - Attachment | 320 bar4641 psi |
Main Pumps - Maximum Pressure - Travel | 320 bar4641 psi |
Main Pumps - Maximum Total Oil Flow | 1544 l/min407 gal/min |
Pilot Pump | 1 × gear pump |
Pilot Pump - Maximum Flow, Pilot | 153 l/min40.4 gal/min |
Pilot Pump - Maximum Pressure, Pilot | 95 bar1378 psi |
Swing Pump | 1 × variable swash plate pump |
Swing Pump - Maximum Flow - Swing | 479 l/min127 gal/min |
Swing Pump - Maximum Pressure - Swing | 365 bar5294 psi |
Bucket Payload | 14.6 t16 t |
Operating Weight | 140 t154 ton (US) |
Cooling System | 165 l44 gal (US) |
Engine Oil | 87 l23 gal (US) |
Fuel Tank | 1700 l449 gal (US) |
Grease Tank | 68 l18 gal (US) |
Hydraulic System - Including Tank | 1752 l463 gal (US) |
Hydraulic Tank | 956 l253 gal (US) |
Swing Drive | 9 l2.4 gal (US) |
Features (3) | All raceways and the internal gearing of swing ring supplied by automatic central lubrication system |
Extra Wide | 1000 mm39 in |
Number of Carrier Rollers - Each Side | 3 |
Number of Shoes - Each Side | 46 |
Number of Track Rollers - Each Side | 9 |
Standard | 700 mm28 in |
Track Pads | Double grouser |
Wide | 900 mm36 in |
Components (7) | Audible travel alarm |