Engine Output - SAE J1995 | Cat C32 - 1516 kW (2,032 hp) |
Standard Bucket Capacity | Face Shovel (heaped 2:1) - 22.0 m3 (28.8 yd3); Backhoe (heaped 1:1) - 22.0 m3 (28.8 yd3) |
Operating Weight | Face Shovel - 405 tonnes (446 tons); Backhoe - 407 tonnes (449 tons) |
Hydraulic Tank Capacity - AC Version - Approximately | 4000 l1057 gal (US) |
Hydraulic Tank Capacity - Diesel Version - Approximately | 3400 l898 gal (US) |
Main Pumps - AC Version | 4 × variable flow axial piston pumps |
Main Pumps - Diesel Version | 4 × variable swash plate pumps |
Main Pumps - Maximum Oil Flow - AC Version | 4 × 746 L/min (4 × 197 gal/min) |
Main Pumps - Maximum Oil Flow - Diesel Version | 4 × 724 L/min (4 × 191 gal/min) |
Maximum Pressure - Attachment | 300 bar4350 psi |
Maximum Pressure - Swing Pumps | 350 bar5080 psi |
Maximum Pressure - Travel | 350 bar5080 psi |
Swing Pumps - AC Version | 3 × reversible swash plate pump |
Swing Pumps - Diesel Version | 4 × reversible swash plate pump |
Swing Pumps - Maximum Oil Flow - AC Version | 3 × 491 L/min (3 × 130 gal/min) |
Swing Pumps - Maximum Oil Flow - Diesel Version | 4 × 321 L/min (4 × 85 gal/min) |
Total Volume of Hydraulic Oil - AC Version - Approximately | 6400 l1585 gal (US) |
Total Volume of Hydraulic Oil - Diesel Version - Approximately | 5800 l1532 gal (US) |
Components (1) | Gear type cooling pumps supplying high-volume, low-pressure oil to aluminum coolers |
Components (2) | Variable axial piston pumps supplying low-volume, high-pressure oil to fans |
Diameter - Fan | 2 × 1524 mm (2 × 60 in) |
Features (1) | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running |
Features (2) | Fan speed is thermostatically controlled |
Features (3) | Extremely high cooling efficiency to ensure optimum oil temperature |
Oil Flow of Cooling Pumps - AC Version | 4 × 379 L/min (4 × 100 gal/min) |
Oil Flow of Cooling Pumps - Diesel Version | 2 × 799 L/min (2 × 211 gal/min) |
Board Control System (BCS III) Features (1) | USB, Lan (TCP/IP) and CAN BUS interfaces for data export |
Board Control System (BCS III) Features (2) | On-screen PDF documentation (e.g. operating instructions, technical handbook, spare parts catalog, electric circuit diagram) |
Board Control System (BCS III) Features (3) | Robust instrument panel including large (12 in) colored touch screen for intuitive handling |
Board Control System (BCS III) Features (4) | Electronic monitoring, data logging & diagnostic system for vital signs & service data of engines, hydraulic & lube systems |
Board Control System (BCS III) Features (5) | On-screen troubleshooting assistance |
Board Control System (BCS III) Features (6) | Graphic charts of logged data |
Board Control System (BCS III) Features (7) | Fault memory with storage of related conditions |
Components (1) | Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat |
Components (10) | External sun shields at side and rear windows |
Components (11) | Sliding emergency ladder (kick-down type) with ladder cage |
Components (12) | Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated |
Components (13) | Robust instrument panel including large colored BCS screen with transflective technology |
Components (2) | Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests |
Components (3) | Roller blinds at all windows |
Components (4) | Windshield with parallel intermittent wiper/washer |
Components (5) | All-round safety glass, armored windshield and sliding side window |
Components (6) | FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure |
Components (7) | Under roof mounted heating ventilating and air conditioning system |
Components (8) | Joystick controls integrated in independently adjustable seat consoles |
Components (9) | Fold-away auxiliary seat with safety belt |
Internal Dimensions of Cab - Height | 2150 mm7.05 ft |
Internal Dimensions of Cab - Length | 2200 mm7.22 ft |
Internal Dimensions of Cab - Width | 1600 mm5.25 ft |
Operator's Eye Level - Approximately | 6.8 m22.31 ft |
Features (1) | Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody |
Features (2) | Closed-loop swing circuit with torque control |
Features (3) | Hydraulic braking of the swing motion by counteracting control |
Features (4) | All raceways and the internal gearing of swing ring supplied by automatic central lubrication system |
Maximum Swing Speed - AC Version | 5.1 r/min5.1 r/min |
Maximum Swing Speed - Diesel Version | 4.7 r/min4.7 r/min |
Parking Brake | Wet multiple disc brake, spring-loaded/hydraulically released |
Swing Drive | 3 compact planetary transmissions with axial piston motors |
Swing Ring | Triple-race roller bearing with sealed internal gearing |
Bottom Rollers - Each Side | 7 |
Components (1) | All running surfaces of sprockets, idlers, rollers and track links are hardened |
Components (2) | Acoustic travel alarm |
Components (3) | Cast double-grouser combined pad-links with bushings connected by hardened full floating pins |
Components (4) | All teeth contact areas of sprocket and pad links are hardened |
Components (5) | Fully hydraulic self-adjusting track tensioning system with membrane accumulator |
Components (6) | Automatic hydraulic retarder valve to prevent over-speed on downhill travel |
Gradeability - Travel Drives - Maximum | 57 %57 % |
Maximum Tractive Force | 2097 kN471260 lb |
Parking Brake | Wet multiple disc brake, spring applied/hydraulically released |
Support Rollers - Each Side | 2 plus a skid plate in between |
Track Pads - Each Side | 42 |
Travel Drives - Each Side | 1 planetary transmission with 2 two-stage axial piston motors |
Travel Speed - 1st Stage - Maximum | 1.5 km/h0.93 mile/h |
Travel Speed - 2nd Stage - Maximum | 2.5 km/h1.55 mile/h |
Capacity - Grease Container | 1000 l264 gal (US) |
Type (1) | Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control adjust the pause/lube times |
Type (2) | System failures displayed by Board Control System |
Type (3) | Grease filters (200 μm) between service station and container, as well as directly behind grease pump |
Type (4) | Connected to the lubrication system are: - pivot points of attachment, bucket and cylinders |
Type (5) | Connected to the lubrication system are: - raceways of the swing roller bearing - two greasing pinions for the internal gearing of the swing ring |
6040 - Ground Pressure | 24.3 N/cm2 (35.3 psi) |
6040 - Note | Other track pads available on request |
6040 - Operating Weight | 407300 kg897930 lb |
6040 - Standard Track Pads | 1200 mm3.9 ft |
6040 FS - Ground Pressure | 24.1 N/cm2 (35.0 psi) |
6040 FS - Note | Other track pads available on request |
6040 FS - Operating Weight | 404600 kg891980 lb |
6040 FS - Standard Track Pads | 1200 mm3.9 ft |
Batteries in Series/Parallel Installation | 6 × 210 Ah - 12V each; 630 Ah - 24V in total |
Components (1) | 13 LED service lights |
Components (2) | Battery isolation relays and switches |
Components (3) | Emergency stop switches accessible from ground level, in engine module and in operator's cab |
Components (4) | 10 LED high-brightness working flood lights - 8 for working area - 2 for rear end |
Components (5) | 2 LED high-brightness access flood lights |
System Voltage | 24V |
Installation | Retractable service station installed underneath the engine module and easily accessible from ground |
All buckets (FS and BH) are equipped with a wear package consisting of: (2) | - Wing shrouds on side walls - Heel shrouds at bottom edges |
Type (8) | Guards for shovel cylinders (FS) |
Alternators | 2 × 150 A |
Aspiration | Turbocharged and air-to-air aftercooled |
Bore | 145 mm5.71 in |
Components (1) | Additional high-capacity water separator |
Components (2) | Two-stage fuel filter including water separator |
Components (3) | Heavy-duty air filters |
Components (4) | Microprocessed engine management |
Components (5) | Hydraulically driven radiator fan with electronically controlled fan speed |
Displacement | 32.1 l1959 in³ |
Emissions | U.S. EPA flex |
Fuel Tank Capacity | 7800 l2060 gal (US) |
Make/Model | 2 × Cat C32 (Tier 2) |
Maximum Altitude - Without Deration - At 10° C Above Sea Level | 2500 m8200 ft |
Number of Cylinders - Each Engine | 12 |
Stroke | 162 mm6.38 in |
Total Rated Gross Power - SAE J1995 | 1516 kW 1,750 min-1 (2,032 hp 1,750 min-1) |
Total Rated Net Power - ISO 3046/1 | 1516 kW 1,750 min-1 (2,032 hp 1,750 min-1) |
Total Rated Net Power - SAE J1349 | 1516 kW 1,750 min-1 (2,032 hp 1,750 min-1) |
All buckets (FS and BH) are equipped with a wear package consisting of: (1) | - Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth |
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) | - Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces |
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) | - Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance |
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) | - Constant boom momentum throughout the whole lift arc - Crowd force assistance |
Type (1) | Inspection hole in monoboom BH |
Type (2) | Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve |
Type (3) | Special wear packages for highly abrasive materials on request |
Type (4) | Catwalks with rails at boom (FS and BH) |
Type (5) | Welding procedures allow for internal counter-welding (double prep weld) wherever possible |
Type (6) | Boom and sticks are stress-relieved after welding |
Type (7) | Boom and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel casting at pivot areas |
Engine Model | 2 × Cat® C32 |
Gross Power - SAE J1995 | 1516 kW2032 HP |
Net Power - SAE J1349 | 1516 kW2032 HP |
Note | Electric drive option available (1400 kW) on 6040 AC/6040 AC FS |
Bucket Capacity - Backhoe (heaped 1:1) | 22 m³28.8 yd³ |
Bucket Capacity - Front Shovel (heaped 2:1) | 22 m³28.8 yd³ |
Bucket Payload | 40 t44 t |
Operating Weight - Backhoe | 407 t449 t |
Operating Weight - Front Shovel | 405 t446 t |
Frequency | 50 Hz (60 Hz on request) |
Output | 1400 kW1877 HP |
Rated Current IN | 156 A (at 6.6 kV) |
Revolutions | 1,500 min-1 (1,800 min-1 at 60 Hz) |
Starting current | 350% of IN (197% of IN Optional) |
Type (1) | Power limit control by Pump Managing System |
Type (2) | Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions |
Type (3) | Squirrel cage induction motor |
Voltage | 6.6 kV ±10% (other on request) |