Specifications

992K
Net Power 607 kW814 HP
Engine Model Cat® C32 ACERT™
Bore 145 mm5.7 in
Stroke 162 mm6.4 in
Displacement 32.1 l1963.5 in³
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 676 kW907 HP
Emissions (Tier 2 Equivalent): Net Power - SAE J1349 607 kW814 HP
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 671 kW900 HP
Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1349 607 kW814 HP
Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1995 607 kW814 HP
Emissions (U.S. EPA Tier 4 Final): Peak Torque at 1,200 rpm - SAE J1995 4765 r/min4765 r/min
Emissions (U.S. EPA Tier 4 Final): Rated Speed 1750 r/min1750 r/min
Operating Weight 99831 kg220089 lb
Bucket Capacity Range 10.7-12.3 m3 (14-16 yd3)
Rated Payload - High Lift (Face Material) 19.1 t21 t
Rated Payload - Standard (Face Material) 21.7 t24 t
Transmission Type Cat Planetary Power Shift
Forward - 1 6.9 km/h4.3 mile/h
Forward - 2 11.9 km/h7.4 mile/h
Forward - 3 20.3 km/h12.6 mile/h
Reverse - 1 7.6 km/h4.7 mile/h
Reverse - 2 13.1 km/h8.1 mile/h
Reverse - 3 22.2 km/h13.8 mile/h
Direct Drive - Forward 1 Disabled
Direct Drive - Forward 2 12.9 km/h8 mile/h
Direct Drive - Forward 3 22.8 km/h14.2 mile/h
Direct Drive - Reverse 1 7.9 km/h4.9 mile/h
Direct Drive - Reverse 2 14.2 km/h8.8 mile/h
Direct Drive - Reverse 3 24.8 km/h15.4 mile/h
Lift Cylinder - Bore 279.4 mm11 in
Lift Cylinder - Stroke 1148 mm45.2 in
Lift/Tilt System - Circuit Positive Flow Control
Lift/Tilt System - Pump Variable Displacement Piston
Maximum Flow at 1,850 rpm 960 l/min254 gal/min
Relief Valve Setting - Lift/Tilt 31000 kPa4500 psi
Tilt Cylinder - Bore 266.7 mm10.5 in
Dump 1.8 s1.8 s
Lower Float Down 3.7 s3.7 s
Rack Back 4.4 s4.4 s
Raise 9.4 s9.4 s
Bucket Capacities 10.7-12.3 m3 (14-16 yd3)
Front Fixed
Rear Oscillating
Oscillation Angle 10° ±, 8° ± with Stops
Brakes Meet ISO 3450:2011
Hearing Protection Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Machine Sound Power Level - Standard Machine Configuration The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Operator Sound Pressure Level The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Maximum Flow at 1,350 rpm 360 l/min95 gal/min
Steering Cut Off Pressure 31000 kPa4500 psi
Steering System - Circuit Pilot, Load Sensing
Steering System - Pump Piston, Variable Displacement
Total Hydraulic Cycle Time 19.3 s19.3 s
Fuel Tank 1562 l413 gal (US)
Transmission 169 l45 gal (US)
B-Pin Height - Maximum Lift 7544 mm24.58 ft
Clearance at 45° Dump (Tooth Tip) 4574 mm15.01 ft
Dump Angle at Maximum Lift 50 degrees
Ground to Bumper Clearance 1176 mm3.86 ft
Ground to Center of Axles 1352 mm4.44 ft
Ground to Lower Hitch Clearance 682 mm2.24 ft
Ground to Top of Exhaust Stacks 5248 mm17.22 ft
Ground to Top of Hood 4043 mm13.26 ft
Ground to Top of ROPS 5678 mm18.63 ft
Maximum Overall Height - Bucket Raised 10109 mm33.08 ft
Maximum Overall Length 16095 mm52.81 ft
Rack Back Angle - Carry 52.5 degrees
Rack Back Angle - Ground Level 42.8 degrees
Rack Back Angle - Maximum Lift 65 degrees
Reach - Maximum Lift 2092 mm6.86 ft
Rear Axle - Centerline to Bumper 4195 mm13.76 ft
Tread Width 3302 mm10.83 ft
Wheel Base 5890 mm19.32 ft
B-Pin Height - Maximum Lift 6927 mm22.73 ft
Clearance at 50° Dump (Tooth Tip) 4480 mm14.7 ft
Dump Angle at Maximum Lift 50 degrees
Ground to Bumper Clearance 1176 mm3.86 ft
Ground to Center of Axles 1352 mm4.44 ft
Ground to Lower Hitch Clearance 682 mm2.24 ft
Ground to Top of Exhaust Stacks 5248 mm17.22 ft
Ground to Top of Hood 4043 mm13.26 ft
Ground to Top of ROPS 5678 mm18.63 ft
Maximum Overall Height - Bucket Raised 9313 mm30.5 ft
Maximum Overall Length 15736 mm52 ft
Rack Back Angle - Carry 52.7 degrees
Rack Back Angle - Ground Level 43.4 degrees
Rack Back Angle - Maximum Lift 65 degrees
Reach - Maximum Lift 2118 mm6.95 ft
Rear Axle - Centerline to Bumper 4195 mm13.76 ft
Tread Width 3302 mm10.83 ft
Wheel Base 5890 mm19.32 ft
Emissions (Tier 2 Equivalent): Gross Power - ISO 14396 659 kW884 HP
Emissions (Tier 2 Equivalent): Net Power - SAE J1995 607 kW814 HP
Emissions (Tier 2 Equivalent): Peak Torque at 1,200 rpm - SAE J1995 4796 r/min4796 r/min
Emissions (Tier 2 Equivalent): Rated Speed 1750 r/min1750 r/min
Emissions (U.S. EPA Tier 4 Final): Gross Power - ISO 14396 659 kW884 HP
Note (Tier 2 Equivalent) (1) These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 2 Equivalent) (2) Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Note (Tier 4 Final) (1) These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 4 Final) (2) Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Torque Rise 30%
Tilt Cylinder - Stroke 2055 mm80.9 in
Steering Cycle Times - High Idle 4.4 s4.4 s
Steering Cycle Times - Low Idle 6.4 s6.4 s
Total Steering Angle 86°
Operating Weight - High Lift 100628 kg221847 lb
Operating Weight - Standard 99831 kg220089 lb
AC Oil 0.268 l0.071 gal (US)
AC Refrigerant 2.72 kg6 lb
Cooling Systems 290 l77 gal (US)
Differential - Final Drives - Front 360 l95 gal (US)
Differential - Final Drives - Rear 345 l91 gal (US)
Engine Crankcase 120 l32 gal (US)
Hydraulic System - Implement 326 l86 gal (US)
Hydraulic System - Steering 159 l42 gal (US)
Machine Sound Power Level - Sound Suppressed Machine Configuration The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

992K Standard Equipment

  • POWER TRAIN
    • Air-to-Air After Cooler (ATAAC)
    • Axle oil coolers (front and rear)
    • Brakes, full hydraulic, enclosed, wet multiple disc service brakes and dry parking/secondary brake
    • Case drain filters
    • Demand fan
    • Driveline, electro-hydraulic parking brake
    • Electric fuel priming pump
    • Engine Cat C32 ACERT
    • Ground level engine shutdown
    • Ground level fast fill fuel
    • Ground level transmission lockout
    • Ground level starter lockout
    • Precleaner, engine air intake
    • Radiator, Aluminum Modular (AMR)
    • Starting aid, ether, automatic
    • Throttle lock
    • Transmission, 533 mm (21 in) planetary powershift with 3F/3R with electronic control
  • ELECTRICAL
    • Alarm, back-up
    • Alternator, 150-amp
    • Batteries, low maintenance
    • Converter, 10-amp, 24V to 12V
    • Deutsch and amp seal terminal connectors
    • Ground level electrical disconnect
    • Ground level starting receptacle for emergency start
    • Light, warning strobe
    • Lights, front and rear, access stairway, turn signals/hazard lights
    • Starter, electric (heavy duty)
    • Starting and charging system, 24V, ECM diagnostic connector
  • OPERATOR ENVIRONMENT
    • Air conditioner and heater with automatic temperature control
    • Cab, sound suppressed, pressurized, rollover protective structure (ROPS/FOPS), radio ready for (entertainment) includes antenna, speakers, and a 12V converter (24-volt, 10-amp) for use with laptop/cell phone use
    • Camera, rear vision
    • Cigar lighter
    • Coat hook
    • Electro-hydraulic tilt and lift controls
    • Horn, electric
    • Implement and steering lockouts
    • Light, dome (cab)
    • Lunchbox and beverage holders
    • Mirrors, rearview (externally mounted)
    • Seat, Cat Comfort with air suspension
    • Seat belt, 2-point, 76 mm (3 in), minder
    • Steering and transmission lock lever
    • STIC control system
    • Tie-offs on ROPS
    • Tinted glass
    • Trainer seat with 76 mm (3 in) wide lap belt
    • Transmission gear indicator
    • VIMS (Vital Info Management System): – 3G with graphical information display – Cycle timer – External data port – Integral Cat Production Measurement (Cat PM)
    • Wet-arm wipers/washer (front, rear, and corners), intermittent front wipers
  • SAFETY AND SECURITY
    • Fire suppression ready
  • OTHER STANDARD EQUIPMENT
    • Automatic lubrication system
    • Bumper service center
    • Couplings, Cat O-ring face seals
    • Doors, service access (locking)
    • Economy mode
    • Emergency platform egress
    • Fenders, steel (front and rear)
    • Fuel, fast fill
    • Grouped hydraulic pressure ports
    • Guards, power train and crankcase
    • Hitch, drawbar with pin
    • Hoses, Cat XT™ and XT-ES
    • Hydraulic oil cooler
    • Impeller clutch
    • Implement and steering ecology drains
    • Mufflers, under hood
    • Oil sampling valves
    • Piston pump case drain filters
    • Service center with ground level electrical and fluids service center
    • Sight gauges: – Steering oil level – Implement oil level – Transmission oil level – Coolant level
    • Stairway, left and right rear access
    • Starter lockout, bumper
    • Steering, load sensing
    • Tie-offs on ROPS
    • Toe kicks
    • Transmission lockout, bumper
    • Vandalism protection caplocks
    • Venturi stacks (2)

992K Optional Equipment

  • OPERATOR ENVIRONMENT
    • AM/FM/CD/MP3 radio
    • AM/FM/CD/MP3 radio with Bluetooth and satellite ready
    • Sun screen
  • STARTING AIDS
    • Engine coolant 120V heater
    • Engine coolant 240V heater
  • MACHINE CONTROL AND GUIDANCE
    • Cat Terrain ready
  • MISCELLANEOUS ATTACHMENTS
    • Arctic antifreeze for protection to –50° C (–58° F)
    • Diagnostic lines
    • Roading fenders
    • Wheel chocks

Exterior

Interior

Specifications

Net Power 607 kW814 HP
Engine Model Cat® C32 ACERT™
Bore 145 mm5.7 in
Stroke 162 mm6.4 in
Displacement 32.1 l1963.5 in³
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 676 kW907 HP
Emissions (Tier 2 Equivalent): Net Power - SAE J1349 607 kW814 HP
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 671 kW900 HP
Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1349 607 kW814 HP
Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1995 607 kW814 HP
Emissions (U.S. EPA Tier 4 Final): Peak Torque at 1,200 rpm - SAE J1995 4765 r/min4765 r/min
Emissions (U.S. EPA Tier 4 Final): Rated Speed 1750 r/min1750 r/min
Operating Weight 99831 kg220089 lb
Bucket Capacity Range 10.7-12.3 m3 (14-16 yd3)
Rated Payload - High Lift (Face Material) 19.1 t21 t
Rated Payload - Standard (Face Material) 21.7 t24 t
Transmission Type Cat Planetary Power Shift
Forward - 1 6.9 km/h4.3 mile/h
Forward - 2 11.9 km/h7.4 mile/h
Forward - 3 20.3 km/h12.6 mile/h
Reverse - 1 7.6 km/h4.7 mile/h
Reverse - 2 13.1 km/h8.1 mile/h
Reverse - 3 22.2 km/h13.8 mile/h
Direct Drive - Forward 1 Disabled
Direct Drive - Forward 2 12.9 km/h8 mile/h
Direct Drive - Forward 3 22.8 km/h14.2 mile/h
Direct Drive - Reverse 1 7.9 km/h4.9 mile/h
Direct Drive - Reverse 2 14.2 km/h8.8 mile/h
Direct Drive - Reverse 3 24.8 km/h15.4 mile/h
Lift Cylinder - Bore 279.4 mm11 in
Lift Cylinder - Stroke 1148 mm45.2 in
Lift/Tilt System - Circuit Positive Flow Control
Lift/Tilt System - Pump Variable Displacement Piston
Maximum Flow at 1,850 rpm 960 l/min254 gal/min
Relief Valve Setting - Lift/Tilt 31000 kPa4500 psi
Tilt Cylinder - Bore 266.7 mm10.5 in
Dump 1.8 s1.8 s
Lower Float Down 3.7 s3.7 s
Rack Back 4.4 s4.4 s
Raise 9.4 s9.4 s
Bucket Capacities 10.7-12.3 m3 (14-16 yd3)
Front Fixed
Rear Oscillating
Oscillation Angle 10° ±, 8° ± with Stops
Brakes Meet ISO 3450:2011
Hearing Protection Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Machine Sound Power Level - Standard Machine Configuration The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Operator Sound Pressure Level The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Maximum Flow at 1,350 rpm 360 l/min95 gal/min
Steering Cut Off Pressure 31000 kPa4500 psi
Steering System - Circuit Pilot, Load Sensing
Steering System - Pump Piston, Variable Displacement
Total Hydraulic Cycle Time 19.3 s19.3 s
Fuel Tank 1562 l413 gal (US)
Transmission 169 l45 gal (US)
B-Pin Height - Maximum Lift 7544 mm24.58 ft
Clearance at 45° Dump (Tooth Tip) 4574 mm15.01 ft
Dump Angle at Maximum Lift 50 degrees
Ground to Bumper Clearance 1176 mm3.86 ft
Ground to Center of Axles 1352 mm4.44 ft
Ground to Lower Hitch Clearance 682 mm2.24 ft
Ground to Top of Exhaust Stacks 5248 mm17.22 ft
Ground to Top of Hood 4043 mm13.26 ft
Ground to Top of ROPS 5678 mm18.63 ft
Maximum Overall Height - Bucket Raised 10109 mm33.08 ft
Maximum Overall Length 16095 mm52.81 ft
Rack Back Angle - Carry 52.5 degrees
Rack Back Angle - Ground Level 42.8 degrees
Rack Back Angle - Maximum Lift 65 degrees
Reach - Maximum Lift 2092 mm6.86 ft
Rear Axle - Centerline to Bumper 4195 mm13.76 ft
Tread Width 3302 mm10.83 ft
Wheel Base 5890 mm19.32 ft
B-Pin Height - Maximum Lift 6927 mm22.73 ft
Clearance at 50° Dump (Tooth Tip) 4480 mm14.7 ft
Dump Angle at Maximum Lift 50 degrees
Ground to Bumper Clearance 1176 mm3.86 ft
Ground to Center of Axles 1352 mm4.44 ft
Ground to Lower Hitch Clearance 682 mm2.24 ft
Ground to Top of Exhaust Stacks 5248 mm17.22 ft
Ground to Top of Hood 4043 mm13.26 ft
Ground to Top of ROPS 5678 mm18.63 ft
Maximum Overall Height - Bucket Raised 9313 mm30.5 ft
Maximum Overall Length 15736 mm52 ft
Rack Back Angle - Carry 52.7 degrees
Rack Back Angle - Ground Level 43.4 degrees
Rack Back Angle - Maximum Lift 65 degrees
Reach - Maximum Lift 2118 mm6.95 ft
Rear Axle - Centerline to Bumper 4195 mm13.76 ft
Tread Width 3302 mm10.83 ft
Wheel Base 5890 mm19.32 ft
Emissions (Tier 2 Equivalent): Gross Power - ISO 14396 659 kW884 HP
Emissions (Tier 2 Equivalent): Net Power - SAE J1995 607 kW814 HP
Emissions (Tier 2 Equivalent): Peak Torque at 1,200 rpm - SAE J1995 4796 r/min4796 r/min
Emissions (Tier 2 Equivalent): Rated Speed 1750 r/min1750 r/min
Emissions (U.S. EPA Tier 4 Final): Gross Power - ISO 14396 659 kW884 HP
Note (Tier 2 Equivalent) (1) These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 2 Equivalent) (2) Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Note (Tier 4 Final) (1) These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 4 Final) (2) Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Torque Rise 30%
Tilt Cylinder - Stroke 2055 mm80.9 in
Steering Cycle Times - High Idle 4.4 s4.4 s
Steering Cycle Times - Low Idle 6.4 s6.4 s
Total Steering Angle 86°
Operating Weight - High Lift 100628 kg221847 lb
Operating Weight - Standard 99831 kg220089 lb
AC Oil 0.268 l0.071 gal (US)
AC Refrigerant 2.72 kg6 lb
Cooling Systems 290 l77 gal (US)
Differential - Final Drives - Front 360 l95 gal (US)
Differential - Final Drives - Rear 345 l91 gal (US)
Engine Crankcase 120 l32 gal (US)
Hydraulic System - Implement 326 l86 gal (US)
Hydraulic System - Steering 159 l42 gal (US)
Machine Sound Power Level - Sound Suppressed Machine Configuration The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Equipment

992K Standard Equipment

  • POWER TRAIN
    • Air-to-Air After Cooler (ATAAC)
    • Axle oil coolers (front and rear)
    • Brakes, full hydraulic, enclosed, wet multiple disc service brakes and dry parking/secondary brake
    • Case drain filters
    • Demand fan
    • Driveline, electro-hydraulic parking brake
    • Electric fuel priming pump
    • Engine Cat C32 ACERT
    • Ground level engine shutdown
    • Ground level fast fill fuel
    • Ground level transmission lockout
    • Ground level starter lockout
    • Precleaner, engine air intake
    • Radiator, Aluminum Modular (AMR)
    • Starting aid, ether, automatic
    • Throttle lock
    • Transmission, 533 mm (21 in) planetary powershift with 3F/3R with electronic control
  • ELECTRICAL
    • Alarm, back-up
    • Alternator, 150-amp
    • Batteries, low maintenance
    • Converter, 10-amp, 24V to 12V
    • Deutsch and amp seal terminal connectors
    • Ground level electrical disconnect
    • Ground level starting receptacle for emergency start
    • Light, warning strobe
    • Lights, front and rear, access stairway, turn signals/hazard lights
    • Starter, electric (heavy duty)
    • Starting and charging system, 24V, ECM diagnostic connector
  • OPERATOR ENVIRONMENT
    • Air conditioner and heater with automatic temperature control
    • Cab, sound suppressed, pressurized, rollover protective structure (ROPS/FOPS), radio ready for (entertainment) includes antenna, speakers, and a 12V converter (24-volt, 10-amp) for use with laptop/cell phone use
    • Camera, rear vision
    • Cigar lighter
    • Coat hook
    • Electro-hydraulic tilt and lift controls
    • Horn, electric
    • Implement and steering lockouts
    • Light, dome (cab)
    • Lunchbox and beverage holders
    • Mirrors, rearview (externally mounted)
    • Seat, Cat Comfort with air suspension
    • Seat belt, 2-point, 76 mm (3 in), minder
    • Steering and transmission lock lever
    • STIC control system
    • Tie-offs on ROPS
    • Tinted glass
    • Trainer seat with 76 mm (3 in) wide lap belt
    • Transmission gear indicator
    • VIMS (Vital Info Management System): – 3G with graphical information display – Cycle timer – External data port – Integral Cat Production Measurement (Cat PM)
    • Wet-arm wipers/washer (front, rear, and corners), intermittent front wipers
  • SAFETY AND SECURITY
    • Fire suppression ready
  • OTHER STANDARD EQUIPMENT
    • Automatic lubrication system
    • Bumper service center
    • Couplings, Cat O-ring face seals
    • Doors, service access (locking)
    • Economy mode
    • Emergency platform egress
    • Fenders, steel (front and rear)
    • Fuel, fast fill
    • Grouped hydraulic pressure ports
    • Guards, power train and crankcase
    • Hitch, drawbar with pin
    • Hoses, Cat XT™ and XT-ES
    • Hydraulic oil cooler
    • Impeller clutch
    • Implement and steering ecology drains
    • Mufflers, under hood
    • Oil sampling valves
    • Piston pump case drain filters
    • Service center with ground level electrical and fluids service center
    • Sight gauges: – Steering oil level – Implement oil level – Transmission oil level – Coolant level
    • Stairway, left and right rear access
    • Starter lockout, bumper
    • Steering, load sensing
    • Tie-offs on ROPS
    • Toe kicks
    • Transmission lockout, bumper
    • Vandalism protection caplocks
    • Venturi stacks (2)

992K Optional Equipment

  • OPERATOR ENVIRONMENT
    • AM/FM/CD/MP3 radio
    • AM/FM/CD/MP3 radio with Bluetooth and satellite ready
    • Sun screen
  • STARTING AIDS
    • Engine coolant 120V heater
    • Engine coolant 240V heater
  • MACHINE CONTROL AND GUIDANCE
    • Cat Terrain ready
  • MISCELLANEOUS ATTACHMENTS
    • Arctic antifreeze for protection to –50° C (–58° F)
    • Diagnostic lines
    • Roading fenders
    • Wheel chocks

360° Interactive

Exterior

Interior

Related Products

Model.GetDictionaryValue(