| Net Power | 726 kW973 HP |
| Operating Weight | 133668 kg294687 lb |
| Bucket Range | 12.2-23.7 m3 (16.0-31.0 yd3) |
| Cat Truck Match - High Lift | 777, 785 |
| Cat Truck Match - Standard Lift | 777 |
| Operating Weight - Tier 2 Equivalent* | 133668 kg294687 lb |
| Operating Weight - Tier 4 Final* | 133668 kg294687 lb |
| Operating Weight* | 133668 kg294687 lb |
| Rated Payload - High Lift | 24.9 t27.5 t |
| Rated Payload - Standard Lift | 27.2 t30 t |
| Articulation Angle | 43 °43 ° |
| Transmission Type | Cat Planetary Power Shift |
| Forward - 1 | 6.8 km/h4.2 mile/h |
| Forward - 2 | 11.9 km/h7.4 mile/h |
| Forward - 3 | 20.5 km/h12.7 mile/h |
| Reverse - 1 | 7.5 km/h4.7 mile/h |
| Reverse - 2 | 13.1 km/h8.1 mile/h |
| Reverse - 3 | 22.5 km/h13.9 mile/h |
| Direct Drive - Forward 1 | Lock-up disabled |
| Direct Drive - Forward 2 | 13 km/h8 mile/h |
| Direct Drive - Forward 3 | 22.8 km/h14.1 mile/h |
| Direct Drive - Reverse 1 | 8 km/h4.9 mile/h |
| Direct Drive - Reverse 2 | 14.2 km/h8.8 mile/h |
| Direct Drive - Reverse 3 | 25.2 km/h15.6 mile/h |
| Cylinders - Lift/Tilt | Double-acting |
| Lift Cylinder - Bore | 267 mm10.5 in |
| Lift Cylinder - Stroke | 1682 mm66.2 in |
| Lift/Tilt System - Circuit | Positive Flow Control |
| Lift/Tilt System - Pump | Variable Piston |
| Maximum Flow at 1,650 rpm | 1180 l/min311 gal/min |
| Relief Valve Setting - Lift/Tilt | 29500 kPa4200 psi |
| Tilt Cylinder - Bore | 235 mm9.3 in |
| Tilt Cylinder - Stroke | 1040 mm40.9 in |
| Dump | 1.8 s1.8 s |
| Lower | 3.8 s3.8 s |
| Lower Float Down | 3.1 s3.1 s |
| Rack Back | 2.4 s2.4 s |
| Raise | 9.2 s9.2 s |
| Total Hydraulic Cycle Time | 17.2 s17.2 s |
| Fuel Tank | 2170 l573.3 gal (US) |
| Cooling System | 303.5 l80.2 gal (US) |
| Crankcase | 120 l31.7 gal (US) |
| Transmission | 196.9 l52 gal (US) |
| Hydraulic System - Tank Only | 553 l146 gal (US) |
| Differential - Final Drives - Front | 482 l127.3 gal (US) |
| Differential - Final Drives - Rear | 482 l127.3 gal (US) |
| Hydraulic System Factory Fill | 873 l230 gal (US) |
| Bucket Capacities | 12.2-23.7 m3 (16.0-31.0 yd3) |
| Front | Fixed |
| Rear | Trunnion |
| Oscillation Angle | 10 degrees |
| Maximum Flow at 1,985 rpm (6900 kPa/1,000 psi) | 505 l/min133 gal/min |
| Relief Valve Setting - Steering | 34500 kPa5000 psi |
| Steering System - Circuit | Closed |
| Steering System - Pump | Piston, variable displacement |
| Total Steering Angle | 86 °86 ° |
| Bore | 145 mm5.7 in |
| Displacement | 32.1 l1959 in³ |
| Emissions | U.S. EPA Tier 4 Final |
| Engine Model | Cat® C32 with ACERT™ Technology |
| Gross Power - SAE J1995 | 775 kW1039 HP |
| Net Power - EEC 80/1269 | 726 kW973 HP |
| Net Power - ISO 14396 | 764 kW1024 HP |
| Net Power - ISO 9249 | 726 kW973 HP |
| Net Power - SAE J1349 | 719 kW964 HP |
| Peak Torque - 1,250 rpm | 5470 N·m4034 lb/ft |
| Rated Speed | 1800 r/min1800 r/min |
| Stroke | 162 mm6.4 in |
| Torque Rise | 33% |
| Bore | 145 mm5.7 in |
| Displacement | 32.1 l1959 in³ |
| Emissions | U.S. EPA Tier 2 Equivalent |
| Engine Model | Cat C32 with ACERT Technology |
| Gross Power - SAE J1995 | 777 kW1041 HP |
| Net Power - EEC 80/1269 | 726 kW973 HP |
| Net Power - ISO 14396 | 764 kW1024 HP |
| Net Power - ISO 9249 | 726 kW973 HP |
| Net Power - SAE J1349 | 719 kW964 HP |
| Peak Torque - 1,250 rpm | 5470 N·m4034 ft-lb |
| Rated Speed | 1800 r/min1800 r/min |
| Stroke | 162 mm6.4 in |
| Torque Rise | 33% |
| Dynamic Operator Sound Pressure Level (ISO 6396:2008) | 70 dB(A)70 dB(A) |
| Operator Sound Pressure - ANSI/SAE J1166 FEB08 | 72 dB(A)72 dB(A) |
| Note | Standard ambient cooling. |
| Note | Standard ambient cooling. |
| Note | High Lift configuration, calculated speeds. |
| Note | High Lift configuration. |
| Note | * High lift, 60/65-51 BFOR (311-1938), standard cooling, 13.8 m3 (18.0 yd3) bucket (496-9912). |
| Note | High Lift configuration. |
| Note (1) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment. |
| Note (2) | The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (3) | The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note | 50/65-51 BFOR (311-1938), calculated speeds. |
| Net Power | 726 kW973 HP |
| Operating Weight | 133668 kg294687 lb |
| Bucket Range | 12.2-23.7 m3 (16.0-31.0 yd3) |
| Cat Truck Match - High Lift | 777, 785 |
| Cat Truck Match - Standard Lift | 777 |
| Operating Weight - Tier 2 Equivalent* | 133668 kg294687 lb |
| Operating Weight - Tier 4 Final* | 133668 kg294687 lb |
| Operating Weight* | 133668 kg294687 lb |
| Rated Payload - High Lift | 24.9 t27.5 t |
| Rated Payload - Standard Lift | 27.2 t30 t |
| Articulation Angle | 43 °43 ° |
| Transmission Type | Cat Planetary Power Shift |
| Forward - 1 | 6.8 km/h4.2 mile/h |
| Forward - 2 | 11.9 km/h7.4 mile/h |
| Forward - 3 | 20.5 km/h12.7 mile/h |
| Reverse - 1 | 7.5 km/h4.7 mile/h |
| Reverse - 2 | 13.1 km/h8.1 mile/h |
| Reverse - 3 | 22.5 km/h13.9 mile/h |
| Direct Drive - Forward 1 | Lock-up disabled |
| Direct Drive - Forward 2 | 13 km/h8 mile/h |
| Direct Drive - Forward 3 | 22.8 km/h14.1 mile/h |
| Direct Drive - Reverse 1 | 8 km/h4.9 mile/h |
| Direct Drive - Reverse 2 | 14.2 km/h8.8 mile/h |
| Direct Drive - Reverse 3 | 25.2 km/h15.6 mile/h |
| Cylinders - Lift/Tilt | Double-acting |
| Lift Cylinder - Bore | 267 mm10.5 in |
| Lift Cylinder - Stroke | 1682 mm66.2 in |
| Lift/Tilt System - Circuit | Positive Flow Control |
| Lift/Tilt System - Pump | Variable Piston |
| Maximum Flow at 1,650 rpm | 1180 l/min311 gal/min |
| Relief Valve Setting - Lift/Tilt | 29500 kPa4200 psi |
| Tilt Cylinder - Bore | 235 mm9.3 in |
| Tilt Cylinder - Stroke | 1040 mm40.9 in |
| Dump | 1.8 s1.8 s |
| Lower | 3.8 s3.8 s |
| Lower Float Down | 3.1 s3.1 s |
| Rack Back | 2.4 s2.4 s |
| Raise | 9.2 s9.2 s |
| Total Hydraulic Cycle Time | 17.2 s17.2 s |
| Fuel Tank | 2170 l573.3 gal (US) |
| Cooling System | 303.5 l80.2 gal (US) |
| Crankcase | 120 l31.7 gal (US) |
| Transmission | 196.9 l52 gal (US) |
| Hydraulic System - Tank Only | 553 l146 gal (US) |
| Differential - Final Drives - Front | 482 l127.3 gal (US) |
| Differential - Final Drives - Rear | 482 l127.3 gal (US) |
| Hydraulic System Factory Fill | 873 l230 gal (US) |
| Bucket Capacities | 12.2-23.7 m3 (16.0-31.0 yd3) |
| Front | Fixed |
| Rear | Trunnion |
| Oscillation Angle | 10 degrees |
| Maximum Flow at 1,985 rpm (6900 kPa/1,000 psi) | 505 l/min133 gal/min |
| Relief Valve Setting - Steering | 34500 kPa5000 psi |
| Steering System - Circuit | Closed |
| Steering System - Pump | Piston, variable displacement |
| Total Steering Angle | 86 °86 ° |
| Bore | 145 mm5.7 in |
| Displacement | 32.1 l1959 in³ |
| Emissions | U.S. EPA Tier 4 Final |
| Engine Model | Cat® C32 with ACERT™ Technology |
| Gross Power - SAE J1995 | 775 kW1039 HP |
| Net Power - EEC 80/1269 | 726 kW973 HP |
| Net Power - ISO 14396 | 764 kW1024 HP |
| Net Power - ISO 9249 | 726 kW973 HP |
| Net Power - SAE J1349 | 719 kW964 HP |
| Peak Torque - 1,250 rpm | 5470 N·m4034 lb/ft |
| Rated Speed | 1800 r/min1800 r/min |
| Stroke | 162 mm6.4 in |
| Torque Rise | 33% |
| Bore | 145 mm5.7 in |
| Displacement | 32.1 l1959 in³ |
| Emissions | U.S. EPA Tier 2 Equivalent |
| Engine Model | Cat C32 with ACERT Technology |
| Gross Power - SAE J1995 | 777 kW1041 HP |
| Net Power - EEC 80/1269 | 726 kW973 HP |
| Net Power - ISO 14396 | 764 kW1024 HP |
| Net Power - ISO 9249 | 726 kW973 HP |
| Net Power - SAE J1349 | 719 kW964 HP |
| Peak Torque - 1,250 rpm | 5470 N·m4034 ft-lb |
| Rated Speed | 1800 r/min1800 r/min |
| Stroke | 162 mm6.4 in |
| Torque Rise | 33% |
| Dynamic Operator Sound Pressure Level (ISO 6396:2008) | 70 dB(A)70 dB(A) |
| Operator Sound Pressure - ANSI/SAE J1166 FEB08 | 72 dB(A)72 dB(A) |
| Note | Standard ambient cooling. |
| Note | Standard ambient cooling. |
| Note | High Lift configuration, calculated speeds. |
| Note | High Lift configuration. |
| Note | * High lift, 60/65-51 BFOR (311-1938), standard cooling, 13.8 m3 (18.0 yd3) bucket (496-9912). |
| Note | High Lift configuration. |
| Note (1) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment. |
| Note (2) | The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (3) | The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note | 50/65-51 BFOR (311-1938), calculated speeds. |
