Net Power |
1297 kW1739 HP |
Engine Model |
Cat® 3516E |
Bore |
170 mm6.7 in |
Stroke |
215 mm8.5 in |
Displacement |
78.1 l4766 in³ |
Rated Speed |
1,600 rpm |
Emissions |
U.S. EPA Tier 4 Final/EU Stage IV* or U.S. EPA Tier 1/EU Stage I Equivalent |
Gross Power - ISO 14396 |
1377 kW1847 HP |
Gross Power - SAE J1995 |
1394 kW1870 HP |
Net Power - SAE J1349 - Standard Ambient |
1297 kW1739 HP |
Peak Torque - 1,200 rpm - SAE J1995 |
11591 N·m8549 lb/ft |
Torque Rise |
39% |
Operating Weight |
242605 kg534852 lb |
Bucket Capacity Range |
19.1-24.5 m3 (25-32 yd3) |
Rated Payload - High Lift |
38.1 t42 t |
Rated Payload - Standard |
40.8 t45 t |
Transmission Type |
Cat Planetary Power Shift |
Forward - 1 |
7.4 km/h4.6 mile/h |
Forward - 2 |
12.9 km/h8 mile/h |
Forward - 3 |
21.9 km/h13.6 mile/h |
Reverse - 1 |
8.1 km/h5 mile/h |
Reverse - 2 |
14.1 km/h8.8 mile/h |
Reverse - 3 |
24 km/h14.9 mile/h |
Direct Drive - Forward 1 |
Lock-up disables |
Direct Drive - Forward 2 |
14 km/h8.7 mile/h |
Direct Drive - Forward 3 |
24.5 km/h15.2 mile/h |
Direct Drive - Reverse 1 |
Lock-up disables |
Direct Drive - Reverse 2 |
15.5 km/h9.6 mile/h |
Direct Drive - Reverse 3 |
27 km/h16.8 mile/h |
Cylinders, Double Acting - Lift, Bore and Stroke |
370 × 1713 mm (14.6 × 67.4 in) |
Cylinders, Double Acting - Tilt, Bore and Stroke |
310 × 1086 mm (12.2 × 42.8 in) |
Lift/Tilt System - Circuit |
Positive Flow Control |
Lift/Tilt System - Pump |
Variable Displacement Piston |
Maximum Flow at 1,700 rpm Engine Speed |
2047 l/min541 gal/min |
Pilot System |
Open Loop and Pressure Reducing |
Relief Valve Setting - Lift/Tilt |
32500 kPa4587 psi |
Raise |
12.6 s12.6 s |
Dump |
3.1 s3.1 s |
Lower Float Down |
4.2 s4.2 s |
Rack Back |
4.9 s4.9 s |
Cooling System |
520 l138 gal (US) |
Differential - Final Drives - Front |
833 l220 gal (US) |
Differential - Final Drives - Rear |
757 l200 gal (US) |
Engine Crankcase |
288 l76 gal (US) |
Fuel Tank - Standard |
3445 l910 gal (US) |
Fuel Tank - With 24 hr Attachment |
5678 l1500 gal (US) |
Hydraulic Tank - Implement and Hydraulic Fan |
1022 l270 gal (US) |
Hydraulic Tank - Steering and Braking |
379 l100 gal (US) |
Transmission |
416 l110 gal (US) |
Bucket Capacities |
19.1-24.5 m3 (25-32 yd3) |
Front |
Fixed |
Rear |
Trunnion |
Oscillation Angle |
9° |
Brakes |
ISO 3450:2011 |
Machine Sound Level (ISO 6395:2008) |
119 dB(A)119 dB(A) |
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent |
72 dB(A)72 dB(A) |
Operator Sound Level (ISO 6396:2008) - Tier 4 Final/EU Stage IV* |
72 dB(A)72 dB(A) |
Maximum Flow at 1,700 rpm Engine Speed |
980 l/min259 gal/min |
Relief Valve Setting - Steering |
31000 kPa4496 psi |
Steering System - Circuit |
Pilot, Load Sensing |
Steering System - Pump |
Piston, Variable Displacement |
Total Steering Angle |
80 degrees |
Diesel Exhaust Fluid (DEF) (Tier 4 Final/Stage IV) |
519 l137 gal (US) |
Note |
*Not available on Tier 4 Final machines. Not available in all regions. |
Oil Renewal System (ORS)* |
75.7 l20 gal (US) |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) |
55 °C131 °F |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) |
53 °C127.4 °F |
Ambient Capability Hydraulically Driven Demand Fan - Standard |
43 °C109.4 °F |
B-Pin Height - Maximum Lift |
9647 mm31.7 ft |
Clearance at Maximum Lift |
7095 mm23.3 ft |
Dump Angle at Maximum Lift |
–50.0 degrees |
Front Axle Centerline to Bucket Tip |
7097 mm23.3 ft |
Ground to Bumper Clearance |
1355 mm4.4 ft |
Ground to Center of Axles |
1820 mm6 ft |
Ground to Lower Hitch Clearance |
898 mm2.9 ft |
Ground to Top of Exhaust Stacks |
7067 mm23.2 ft |
Ground to Top of Hood |
5682 mm18.6 ft |
Ground to Top of ROPS |
7118.5 mm23.4 ft |
Maximum Overall Height - Bucket Raised |
12545 mm41.2 ft |
Maximum Overall Length |
20102 mm66 ft |
Note |
Assumes 22.9 m3 (30 yd3) bucket for standard lift, and 21.4 m3 (28 yd3) bucket for high lift, fitted with Cat Advansys™ heavy duty tips. Assumes tire size 58/85-57. |
Rack Angle at Maximum Lift |
59.4 degrees |
Rack Back Angle - Carry |
53.7 degrees |
Rack Back Angle - Ground Level |
45.0 degrees |
Reach - Maximum Lift |
2688 mm8.8 ft |
Rear Axle - Centerline to Bumper |
6205 mm20.4 ft |
Tread Width |
4300 mm14.1 ft |
Wheel Base |
6800 mm22.3 ft |
Width - Over Tires - With Bulge |
5760 mm18.8 ft |
B-Pin Height - Maximum Lift |
8790 mm28.8 ft |
Clearance at Maximum Lift |
6167 mm20.2 ft |
Dump Angle at Maximum Lift |
–50.0 degrees |
Front Axle Centerline to Bucket Tip |
6503 mm21.3 ft |
Ground to Bumper Clearance |
1355 mm4.4 ft |
Ground to Center of Axles |
1820 mm6 ft |
Ground to Lower Hitch Clearance |
898 mm2.9 ft |
Ground to Top of Exhaust Stacks |
7067 mm23.2 ft |
Ground to Top of Hood |
5682 mm18.6 ft |
Ground to Top of ROPS |
7118.5 mm23.4 ft |
Maximum Overall Height - Bucket Raised |
11771 mm38.6 ft |
Maximum Overall Length |
19508 mm64 ft |
Note |
Assumes 22.9 m3 (30 yd3) bucket for standard lift, and 21.4 m3 (28 yd3) bucket for high lift, fitted with Cat Advansys™ heavy duty tips. Assumes tire size 58/85-57. |
Rack Angle at Maximum Lift |
59.5 degrees |
Rack Back Angle - Carry |
47.7 degrees |
Rack Back Angle - Ground Level |
39.7 degrees |
Reach - Maximum Lift |
2821 mm9.3 ft |
Rear Axle - Centerline to Bumper |
6205 mm20.4 ft |
Tread Width |
4300 mm14.1 ft |
Wheel Base |
6800 mm22.3 ft |
Width - Over Tires - With Bulge |
5758 mm18.8 ft |
Net Power - SAE J1349 - High Ambient |
1265 kW1696 HP |
Note (1) |
The power ratings apply when tested under the reference conditions for the specified standard. |
Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and muffler. |
Note (3) |
The gross power advertised is with the fan at maximum speed. |
Note (4) |
*Tier 4 Final/EU Stage IV configuration is ready to meet Stage V emission requirements once in effect. |
Total Hydraulic Cycle Time - Empty Bucket |
23.5 s23.5 s |
Steering Cycle Times - High Idle |
4.3 s4.3 s |
Steering Cycle Times - Low Idle |
7.6 s7.6 s |
Bucket Capacity Range - Coal |
32.1-43.6 m3 (42-57 yd3) |
Bucket Capacity Range - Iron Ore |
17.2 m³22.3 yd³ |
Bucket Capacity Range - Rock |
19.1-24.5 m3 (25-32 yd3) |
Note |
*EU Stage V ready. |
Sound Performance |
The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
Machine Sound Level (ISO 6395:2008) |
117 dB(A)117 dB(A) |
Note |
*EU Stage V ready. |
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent |
71 dB(A)71 dB(A) |
Operator Sound Level (ISO 6396:2008) - Tier 4 Final/EU Stage IV* |
71 dB(A)71 dB(A) |
Sound Performance |
The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
Note |
Travel speeds based on 58/85-57 tires. |