Base Power (1st Gear) - Net | 136 kW183 HP |
Engine Model | Cat C7 ACERT™ |
Bore | 110 mm4.3 in |
Stroke | 127 mm5 in |
Speed at Rated Power | 2,000 rpm |
Base Power (1st Gear) - Net - Metric | 136 kW186 HP |
Maximum Torque - VHP Plus | 1052 N·m776 lb/ft |
Torque Rise - VHP Plus | 39% |
VHP Plus Range - Net | 136-159 kW (183-213 hp) |
VHP Plus Range - Net - Metric | 136-159 kW (186-216 hp) |
Displacement | 7.2 l439 in³ |
Number of Cylinders | 6 |
Derating Altitude | 3048 m10000 ft |
Standard - Fan Speed - Maximum | 1,450 rpm |
Standard - Fan Speed - Minimum | 600 rpm |
Standard - Ambient Capability | 43 °C109 °F |
High Ambient - Fan Speed - Maximum | 1,650 rpm |
High Ambient - Fan Speed - Minimum | 600 rpm |
High - Ambient Capability | 50 °C122 °F |
Forward/Reverse Gears | 8 Forward/6 Reverse |
Transmission | Direct drive, power shift, countershaft |
Brakes - Service | Multiple oil disc |
Brakes - Service - Surface Area | 23000 cm²3565 in² |
Brakes - Parking | Multiple oil disc |
Brakes - Secondary | Dual circuit control system |
Circuit Type | Electro-hydraulic load sensing, closed center |
Pump Type | Variable piston |
Pump Output | 210 l/min55.7 gal/min |
Maximum System Pressure | 24150 kPa3500 psi |
Standby Pressure | 3100 kPa450 psi |
Top Speed - Forward | 46.6 km/h29 mile/h |
Top Speed - Reverse | 36.8 km/h22.9 mile/h |
Turning Radius - Outside Front Tires | 7.6 m24.93 ft |
Steering Range - Left/Right | 47.5 degrees |
Articulation Angle - Left/Right | 20 degrees |
Forward - 1st | 4 km/h2.5 mile/h |
Forward - 2nd | 5.5 km/h2.4 mile/h |
Forward - 3rd | 8 km/h5 mile/h |
Forward - 4th | 11 km/h6.8 mile/h |
Forward - 5th | 17.1 km/h10.6 mile/h |
Forward - 6th | 23.3 km/h14.5 mile/h |
Forward - 7th | 32 km/h19.9 mile/h |
Forward - 8th | 46.6 km/h29 mile/h |
Reverse - 1st | 3.2 km/h2 mile/h |
Reverse - 2nd | 6 km/h3.7 mile/h |
Reverse - 3rd | 8.7 km/h5.4 mile/h |
Reverse - 4th | 13.5 km/h8.4 mile/h |
Reverse - 5th | 25.3 km/h15.7 mile/h |
Reverse - 6th | 36.8 km/h22.9 mile/h |
Fuel Capacity | 416 l110 gal (US) |
Cooling System | 40 l10.6 gal (US) |
Hydraulic System - Tank | 64 l16.9 gal (US) |
Transmission - Differential - Final Drives | 64 l16.9 gal (US) |
Engine Oil | 25 l6.6 gal (US) |
Tandem Housing - Each | 64 l16.9 gal (US) |
Front Wheel Spindle Bearing Housing | 0.5 l0.13 gal (US) |
Circle Drive Housing | 7 l1.8 gal (US) |
Drawbar - Width | 76.2 mm3 in |
Circle - Diameter | 1530 mm60.2 in |
Circle - Blade Beam Thickness | 40 mm1.6 in |
Drawbar - Height | 152 mm6 in |
Front Frame Structure - Height | 305 mm12 in |
Front Frame Structure - Thickness | 16 mm0.6 in |
Front Frame Structure - Width | 305 mm12 in |
Front Axle - Height to Center | 571 mm23 in |
Front Axle - Wheel Lean - Left/Right | 18 degrees |
Front Axle - Total Oscillation per Side | 32 degrees |
Height | 506 mm19.9 in |
Width | 201 mm7.9 in |
Sidewall Thickness - Inner | 16 mm0.6 in |
Sidewall Thickness - Outer | 18 mm0.7 in |
Drive Chain Pitch | 50.8 mm2 in |
Wheel Axle Spacing | 1523 mm60 in |
Tandem Oscillation - Front Up | 15 degrees |
Tandem Oscillation - Front Down | 25 degrees |
Blade Width | 3.7 m12 ft |
Arc Radius | 413 mm16.3 in |
Throat Clearance | 166 mm6.5 in |
Cutting Edge Width | 152 mm6 in |
Cutting Edge Thickness | 16 mm0.6 in |
End Bit - Width | 152 mm6 in |
End Bit - Thickness | 16 mm0.6 in |
Blade Pull - Base GVW | 10810 kg23832 lb |
Blade Pull - Maximum GVW | 13685 kg30170 lb |
Down Pressure - Base GVW | 7244 kg15969 lb |
Down Pressure - Maximum GVW | 11739 kg25880 lb |
Height | 610 mm24 in |
Thickness | 22 mm0.87 in |
Width | 3.7 m12 ft |
Circle Centershift - Right | 728 mm28.7 in |
Circle Centershift - Left | 695 mm27.4 in |
Moldboard Sideshift - Right | 660 mm26 in |
Moldboard Sideshift - Left | 510 mm20.1 in |
Maximum Blade Position Angle | 90 degrees |
Blade Tip Range - Forward | 40 degrees |
Blade Tip Range - Backward | 5 degrees |
Maximum Lift Above Ground | 480 mm18.9 in |
Maximum Depth of Cut | 715 mm28.1 in |
Maximum Shoulder Reach Outside of Tires - Left | 1790 mm70.5 in |
Maximum Shoulder Reach Outside of Tires - Right | 1978 mm77.9 in |
Ripper Shank Holder Spacing | 533 mm21 in |
Ripping Depth - Maximum | 428 mm16.8 in |
Ripper Shank Holders | 5 |
Penetration Force | 9199 kg20280 lb |
Pry-Out Force | 11641 kg25664 lb |
Machine Length Increase, Beam Raised | 919 mm36.2 in |
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing | 116 mm4.6 in |
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders | 5/11 |
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum | 467 mm18.4 in |
Front, V-Type, 5 or 11 Tooth - Working Width | 1205 mm47.4 in |
Mid, V-Type - Scarifier Shank Holder Spacing | 116 mm4.6 in |
Mid, V-Type - Scarifier Shank Holders | 11 |
Mid, V-Type - Scarifying Depth, Maximum | 292 mm11.5 in |
Mid, V-Type - Working Width | 1184 mm46.6 in |
Rear - Scarifying Depth, Maximum | 266 mm10.5 in |
Rear - Working Width | 2300 mm91 in |
Rear - Scarifier Shank Holders | 9 |
Rear - Scarifier Shank Holder Spacing | 267 mm10.5 in |
Operating Weight - Typically Equipped | 18400 kg40565 lb |
Gross Vehicle Weight - Typically Equipped | 18400 kg40565 lb |
Gross Vehicle Weight - Maximum - Rear Axle | 15206 kg33523 lb |
Gross Vehicle Weight - Base - Front Axle | 4220 kg9303 lb |
Gross Vehicle Weight - Base - Rear Axle | 12011 kg26479 lb |
Gross Vehicle Weight - Maximum - Total | 22045 kg48601 lb |
Gross Vehicle Weight - Base - Total | 16231 kg35783 lb |
Gross Vehicle Weight - Maximum - Front Axle | 6839 kg15077 lb |
Gross Vehicle Weight - Typically Equipped - Front Axle | 5090 kg11221 lb |
Gross Vehicle Weight - Typically Equipped - Rear Axle | 13310 kg29343 lb |
Gross Vehicle Weight - Typically Equipped - Total | 18400 kg40565 lb |
Height - Top of Cab Product Link | 3378 mm133 in |
Length - Push Plate to Ripper | 10136 mm399.1 in |
Length - Push Plate to Ripper Retracted | 9818 mm386.5 in |
Height - Top of Cab | 3308 mm130.2 in |
Width - Outside Front Tires | 2511 mm98.9 in |
Length - Front Axle to Mid Tandem | 6123 mm241.1 in |
Length - Front Tire to Rear of Machine | 8754 mm344.6 in |
Length - Front Axle to Moldboard | 2552 mm100.5 in |
Length - Between Tandem Axles | 1523 mm60 in |
Width - Outside Rear Tires | 2511 mm98.9 in |
Width - Tire Center Lines | 2140 mm84.3 in |
Height - Front Axle Center | 596 mm23.5 in |
Height - Exhaust Stack | 3076 mm121.1 in |
Height - Top of Cylinders | 3040 mm119.7 in |
Ground Clearance - Rear Axle | 339 mm13.3 in |
Brakes | ISO 3450:1996 |
ROPS/FOPS | ISO 3471:2008, ISO 3449:2005 Level II |
Sound | ISO 6394:2008, ISO 6395:2008 |
Steering | ISO 5010:2007 |
Gear - Forward 1st | 136 kW183 HP |
Gear - Forward 2nd | 140 kW188 HP |
Gear - Forward 3rd | 144 kW193 HP |
Gear - Forward 4th | 148 kW198 HP |
Gear - Forward 5th | 151 kW203 HP |
Gear - Forward 6th | 151 kW203 HP |
Gear - Forward 7th | 155 kW208 HP |
Gear - Forward 8th | 159 kW213 HP |
Gear - Reverse 1st | 136 kW183 HP |
Gear - Reverse 2nd | 140 kW188 HP |
Gear - Reverse 3rd | 144 kW193 HP |