Flywheel Power | 144 kW193 HP |
Engine Model | Cat C7.1 ACERT |
Net Power - ISO 9249/SAE J1349 | 144 kW193 HP |
Net Power - ISO 9249/SAE J1349 (DIN) | 144 kW196 HP |
Track on Ground | 2542 mm100 in |
Track Gauge | 1850 mm72.8 in |
Ground Contact Area - Optional Shoe | 2.6 m²4013 in² |
Ground Contact Area - Standard Shoe | 3.2 m²4900 in² |
Ground Pressure - Optional Shoe | 75.8 kPa11 psi |
Ground Pressure - Standard Shoe | 62 kPa9 psi |
Ground Pressure(1) - Optional Shoe | 76.9 kPa11.1 psi |
Ground Pressure(1) - Standard Shoe | 62.9 kPa9.1 psi |
Grouser Height - Double Grouser | 42 mm1.65 in |
Track Rollers/Shoes - Each Side | Jul-38 |
Track Shoe Width - Optional | 450 mm18 in |
Track Shoe Width - Standard | 550 mm22 in |
Fuel Tank | 320 l84.5 gal (US) |
Operating Weight | 20021 kg44138 lb |
Capacity - General Purpose | 2.5 m³3.2 yd³ |
Capacity - Multi-Purpose | 2 m³2.6 yd³ |
Capacity - Performance Series | 2.8 m³3.7 yd³ |
Width - General Purpose | 2612 mm102.8 in |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes. |
Width - Multi-Purpose | 2575 mm101.3 in |
Width - Performance Series | 2712 mm106.8 in |
Bucket Height - Carry Position | 457 mm18 in |
Carry Position Approach Angle | 15° |
Clearance at Full Lift Height and 45° Dump* | 2915 mm114.8 in |
Digging Depth* | 138 mm5.4 in |
Grading Angle | 63° |
Ground Clearance | 471 mm18.5 in |
Height - Bucket Hinge Pin | 3940 mm155.1 in |
Height - Top of Stack | 2940 mm115.7 in |
Machine Height - Top of Cab | 3325 mm130.9 in |
Maximum Rollback - Ground/Carry Position | 43°/50° |
Maximum Rollback/Dump - Fully Raised | 52°/53° |
Note | *With General Purpose bucket and extra duty teeth. |
Overall Machine Height - Bucket Fully Raised | 5402 mm212.7 in |
Overall Machine Length* | 7001 mm275.6 in |
Overall Machine Width without Bucket: With Standard Tracks - 550 mm (21.6 in) Shoes | 2400 mm94.5 in |
Ramp Angle | 29° |
Reach at Full Lift Height and 45° Dump* | 1373 mm54 in |
Emissions | U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, equivalent to Tier 3/Stage IIIA |
Note (1) | All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. |
Note (2) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
DEF Tank(1) | 16 l4.22 gal (US) |
Note | (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. |
Note | (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. |
Note | (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. |
Operating Weight(1) | 20308 kg44771 lb |