Net Power | 72 kW97 HP |
Engine Model | Cat C4.4 |
Maximum Gross Power - ISO 14396 | 74 kW100 HP |
Maximum Gross Power - ISO 14396 (DIN) | 74 kW101 HP |
Maximum Gross Power - Maximum Engine Speed | 2350 r/min2350 r/min |
Maximum Gross Power - SAE J1995 | 76 kW102 HP |
Rated Net Power - Rated Engine Speed | 2200 r/min2200 r/min |
Rated Net Power - SAE J1349 | 72 kW96 HP |
Operating Weight | 7492 kg16517 lb |
Cooling System | 21.5 l5.7 gal (US) |
Fuel Tank | 154 l40.7 gal (US) |
Engine Crankcase | 8.8 l2.3 gal (US) |
Hydraulic System - Including Tank | 98 l25.9 gal (US) |
Rated Bucket Capacity | 1.9 m³2.5 yd³ |
Maximum Gross Power | 8 kW74 HP |
Bucket Capacities | 1.3-1.9 m3 (1.7-2.5 yd3) |
ROPS | ISO 3471:2008 |
FOPS | ISO 3449:2005 Level II |
Front | Fixed; Locking differential (standard) |
Rear | Oscillating �11 degrees; Locking differential (Standard) |
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Note (2) | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A). |
Note (3) | The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A). |
Note (4) | *The measurements were conducted with the cab doors and windows closed. |
Bore | 105 mm4.13 in |
Displacement | 4.4 l268 in³ |
Emissions | Engine meets U.S. EPA Tier 3/EU Stage IIIA emission standards. |
Maximum Gross Torque - ISO 14396 | 450 N·m332 lb/ft |
Maximum Gross Torque - SAE J1995 | 455 N·m336 lb/ft |
Maximum Net Torque - ISO 9249 | 446 N·m329 lb/ft |
Maximum Net Torque - SAE J1349 | 441 N·m325 lb/ft |
Note | Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. |
Rated Net Power - ISO 9249 | 72 kW97 HP |
Rated Net Power - ISO 9249 (DIN) | 72 kW98 HP |
Stroke | 127 mm5 in |
Hydraulic Cycle Time - Dump, at Maximum Reach | 1.4 s1.4 s |
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level | 3.7 s3.7 s |
Hydraulic Cycle Time - Rackback | 2.2 s2.2 s |
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift | 5.2 s5.2 s |
Hydraulic Cycle Time - Total Cycle Time | 12.5 s12.5 s |
Maximum Flow - Implement Pump | 122 l/min32 gal/min |
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow | 90 l/min24 gal/min |
Maximum Flow - Implement Pump - 4th Function, Maximum Flow | 90 l/min24 gal/min |
Maximum Working Pressure - Implement Pump | 23500 kPa3408 psi |
Relief Pressure - Tilt Cylinder | 34000 kPa4931 psi |
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure | 21000 kPa3046 psi |
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure | 21000 kPa3046 psi |
Axles - Front Center Differential | 7.5 l2 gal (US) |
Axles - Rear Center Differential | 7.5 l2 gal (US) |
Hydraulic Tank | 55 l14.5 gal (US) |
Transmission | 3.4 l0.9 gal (US) |
Maximum Flow - Steering Pump | 66 l/min17 gal/min |
Maximum Working Pressure - Steering Pump | 18500 kPa2683 psi |
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | 3.75 turns3.75 turns |
Steering Articulation Angle - Each Direction | 40 °40 ° |
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed | 3.2 s3.2 s |
Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
Note (2) | In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities. |
Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
Other Choices Include | 15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport� |
Standard Size | 15.5-25 12PR |
Forward and Reverse - Low Range, Speed Range 1* | 10 km/h6.3 mile/h |
Forward and Reverse - Low Range, Speed Range 2* | 20 km/h12.5 mile/h |
Note | *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. |