Net Power | 1297 kW1739 HP |
Engine Model | Cat® 3516E |
Bore | 170 mm6.7 in |
Stroke | 215 mm8.5 in |
Displacement | 78.1 l4766 in³ |
Rated Speed | 1,600 rpm |
Emissions | U.S. EPA Tier 4 Final/EU Stage IV* or U.S. EPA Tier 1/EU Stage I Equivalent |
Gross Power - ISO 14396 | 1377 kW1847 HP |
Gross Power - SAE J1995 | 1394 kW1870 HP |
Net Power - SAE J1349 - Standard Ambient | 1297 kW1739 HP |
Peak Torque - 1,200 rpm - SAE J1995 | 11591 N·m8549 lb/ft |
Torque Rise | 39% |
Operating Weight | 242605 kg534852 lb |
Bucket Capacity Range | 19.1-24.5 m3 (25-32 yd3) |
Rated Payload - High Lift | 38.1 t42 t |
Rated Payload - Standard | 40.8 t45 t |
Transmission Type | Cat Planetary Power Shift |
Forward - 1 | 7.4 km/h4.6 mile/h |
Forward - 2 | 12.9 km/h8 mile/h |
Forward - 3 | 21.9 km/h13.6 mile/h |
Reverse - 1 | 8.1 km/h5 mile/h |
Reverse - 2 | 14.1 km/h8.8 mile/h |
Reverse - 3 | 24 km/h14.9 mile/h |
Direct Drive - Forward 1 | Lock-up disables |
Direct Drive - Forward 2 | 14 km/h8.7 mile/h |
Direct Drive - Forward 3 | 24.5 km/h15.2 mile/h |
Direct Drive - Reverse 1 | Lock-up disables |
Direct Drive - Reverse 2 | 15.5 km/h9.6 mile/h |
Direct Drive - Reverse 3 | 27 km/h16.8 mile/h |
Cylinders, Double Acting - Lift, Bore and Stroke | 370 × 1713 mm (14.6 × 67.4 in) |
Cylinders, Double Acting - Tilt, Bore and Stroke | 310 × 1086 mm (12.2 × 42.8 in) |
Lift/Tilt System - Circuit | Positive Flow Control |
Lift/Tilt System - Pump | Variable Displacement Piston |
Maximum Flow at 1,700 rpm Engine Speed | 2047 l/min541 gal/min |
Pilot System | Open Loop and Pressure Reducing |
Relief Valve Setting - Lift/Tilt | 32500 kPa4587 psi |
Raise | 12.6 s12.6 s |
Dump | 3.1 s3.1 s |
Lower Float Down | 4.2 s4.2 s |
Rack Back | 4.9 s4.9 s |
Cooling System | 520 l138 gal (US) |
Differential - Final Drives - Front | 833 l220 gal (US) |
Differential - Final Drives - Rear | 757 l200 gal (US) |
Engine Crankcase | 288 l76 gal (US) |
Fuel Tank - Standard | 3445 l910 gal (US) |
Fuel Tank - With 24 hr Attachment | 5678 l1500 gal (US) |
Hydraulic Tank - Implement and Hydraulic Fan | 1022 l270 gal (US) |
Hydraulic Tank - Steering and Braking | 379 l100 gal (US) |
Transmission | 416 l110 gal (US) |
Bucket Capacities | 19.1-24.5 m3 (25-32 yd3) |
Front | Fixed |
Rear | Trunnion |
Oscillation Angle | 9° |
Brakes | ISO 3450:2011 |
Machine Sound Level (ISO 6395:2008) | 119 dB(A)119 dB(A) |
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | 72 dB(A)72 dB(A) |
Operator Sound Level (ISO 6396:2008) - Tier 4 Final/EU Stage IV* | 72 dB(A)72 dB(A) |
Maximum Flow at 1,700 rpm Engine Speed | 980 l/min259 gal/min |
Relief Valve Setting - Steering | 31000 kPa4496 psi |
Steering System - Circuit | Pilot, Load Sensing |
Steering System - Pump | Piston, Variable Displacement |
Total Steering Angle | 80 degrees |
Diesel Exhaust Fluid (DEF) (Tier 4 Final/Stage IV) | 519 l137 gal (US) |
Note | *Not available on Tier 4 Final machines. Not available in all regions. |
Oil Renewal System (ORS)* | 75.7 l20 gal (US) |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) | 55 °C131 °F |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) | 53 °C127.4 °F |
Ambient Capability Hydraulically Driven Demand Fan - Standard | 43 °C109.4 °F |
B-Pin Height - Maximum Lift | 9647 mm31.7 ft |
Clearance at Maximum Lift | 7095 mm23.3 ft |
Dump Angle at Maximum Lift | –50.0 degrees |
Front Axle Centerline to Bucket Tip | 7097 mm23.3 ft |
Ground to Bumper Clearance | 1355 mm4.4 ft |
Ground to Center of Axles | 1820 mm6 ft |
Ground to Lower Hitch Clearance | 898 mm2.9 ft |
Ground to Top of Exhaust Stacks | 7067 mm23.2 ft |
Ground to Top of Hood | 5682 mm18.6 ft |
Ground to Top of ROPS | 7118.5 mm23.4 ft |
Maximum Overall Height - Bucket Raised | 12545 mm41.2 ft |
Maximum Overall Length | 20102 mm66 ft |
Note | Assumes 22.9 m3 (30 yd3) bucket for standard lift, and 21.4 m3 (28 yd3) bucket for high lift, fitted with Cat Advansys™ heavy duty tips. Assumes tire size 58/85-57. |
Rack Angle at Maximum Lift | 59.4 degrees |
Rack Back Angle - Carry | 53.7 degrees |
Rack Back Angle - Ground Level | 45.0 degrees |
Reach - Maximum Lift | 2688 mm8.8 ft |
Rear Axle - Centerline to Bumper | 6205 mm20.4 ft |
Tread Width | 4300 mm14.1 ft |
Wheel Base | 6800 mm22.3 ft |
Width - Over Tires - With Bulge | 5760 mm18.8 ft |
B-Pin Height - Maximum Lift | 8790 mm28.8 ft |
Clearance at Maximum Lift | 6167 mm20.2 ft |
Dump Angle at Maximum Lift | –50.0 degrees |
Front Axle Centerline to Bucket Tip | 6503 mm21.3 ft |
Ground to Bumper Clearance | 1355 mm4.4 ft |
Ground to Center of Axles | 1820 mm6 ft |
Ground to Lower Hitch Clearance | 898 mm2.9 ft |
Ground to Top of Exhaust Stacks | 7067 mm23.2 ft |
Ground to Top of Hood | 5682 mm18.6 ft |
Ground to Top of ROPS | 7118.5 mm23.4 ft |
Maximum Overall Height - Bucket Raised | 11771 mm38.6 ft |
Maximum Overall Length | 19508 mm64 ft |
Note | Assumes 22.9 m3 (30 yd3) bucket for standard lift, and 21.4 m3 (28 yd3) bucket for high lift, fitted with Cat Advansys™ heavy duty tips. Assumes tire size 58/85-57. |
Rack Angle at Maximum Lift | 59.5 degrees |
Rack Back Angle - Carry | 47.7 degrees |
Rack Back Angle - Ground Level | 39.7 degrees |
Reach - Maximum Lift | 2821 mm9.3 ft |
Rear Axle - Centerline to Bumper | 6205 mm20.4 ft |
Tread Width | 4300 mm14.1 ft |
Wheel Base | 6800 mm22.3 ft |
Width - Over Tires - With Bulge | 5758 mm18.8 ft |
Net Power - SAE J1349 - High Ambient | 1265 kW1696 HP |
Note (1) | The power ratings apply when tested under the reference conditions for the specified standard. |
Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and muffler. |
Note (3) | The gross power advertised is with the fan at maximum speed. |
Note (4) | *Tier 4 Final/EU Stage IV configuration is ready to meet Stage V emission requirements once in effect. |
Total Hydraulic Cycle Time - Empty Bucket | 23.5 s23.5 s |
Steering Cycle Times - High Idle | 4.3 s4.3 s |
Steering Cycle Times - Low Idle | 7.6 s7.6 s |
Bucket Capacity Range - Coal | 32.1-43.6 m3 (42-57 yd3) |
Bucket Capacity Range - Iron Ore | 17.2 m³22.3 yd³ |
Bucket Capacity Range - Rock | 19.1-24.5 m3 (25-32 yd3) |
Note | *EU Stage V ready. |
Sound Performance | The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
Machine Sound Level (ISO 6395:2008) | 117 dB(A)117 dB(A) |
Note | *EU Stage V ready. |
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | 71 dB(A)71 dB(A) |
Operator Sound Level (ISO 6396:2008) - Tier 4 Final/EU Stage IV* | 71 dB(A)71 dB(A) |
Sound Performance | The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
Note | Travel speeds based on 58/85-57 tires. |