Specifications
Overview
The new electronic Cat® C2.2 Industrial Diesel Engines, with common rail fuel system, deliver impressive performance throughout a wide speed range with exceptional power density. Ultracompact package size and extensive options make them ideal for agriculture, aerial lifts, compressors, construction, general industrial, irrigation equipment, material handling, mobile earthmoving equipment, mobile light towers, turf and landscaping, underground mining equipment, and welders.
Minimum Power | 36.4 bkW48.8 BHP |
Maximum Power | 50 bkW67.1 BHP |
Rated Speed | 2800 rpm |
Emissions | U.S. EPA Tier 4 Final, EU Stage IIIB |
Engine Configuration | In-Line 4, 4-Stroke-Cycle Diesel |
Bore | 84 mm (3.3 in) |
Stroke | 100 mm (3.9 in) |
Displacement | 2.2 L (135 in³) |
Aspiration | Turbocharged (T) or Turbocharged-Aftercooled (TA) |
Compression Ratio | 18:1 |
Combustion System | Direct Injection |
Rotation from Flywheel End | Counterclockwise |
Cooling System - Capacity | 4.3 L (4.5 qt) |
Lube System - Refill | 9.3 L (9.8 qt) |
Height | 736 mm (28.9 in) |
Length | 764 mm (30.07 in) |
Weight - Net Dry - Basic Operating Engine Without Optional Attachments | 230 kg (507 lbs) |
Width | 545 mm (21.5 in) |
Diameter | 155 mm (6.1 in) |
Length | 408.4 mm (16.07 in) |
Weight | 5.8 kg (12.79 lb) |
C2.2 Standard Equipment
- Control System
- Alternator 12 volt 85 amp
- Starter motor 12 volt
- Glow plug starting aid, delivers heat directly to cylinder for best starting performance in cold weather
- Electronic control unit - chassis mounted
- Flexible and configurable software features and well supported SAE J1939 CAN bus enables highly integrated machines
- Wiring harness connectors and sensors are waterproof and designed to withstand harsh off-highway environments
- Flywheels and Flywheel Housing
- SAE No. 4 standard flywheel housing
- Choice of flywheel weight and bolting pattern to accommodate a range of industry-standard hydraulic pumps and transmissions
- Fuel System
- 2000 bar high-pressure common rail system
- Proprietary fuel filters to ensure engine protection through correct service procedures, along with water-in-fuel detection, ensures maximum machine up-time for the operator
- Lube System
- Alternative oil fillers
- Spin-on lube oil filter
- General
- Cast iron engine block
- Cast iron exhaust manifold
- Gradeability 35° continuous
- Paint: Cat yellow
- U.S. EPA Tier 4 Final, EU Stage IIIB Aftertreatment/Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC)
Reliable, Quiet and Durable Power
Reliable, Quiet and Durable Power
High Performance
Fuel Efficiency
Broad Application Range
Package Size
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
Specifications
Minimum Power | 36.4 bkW48.8 BHP |
Maximum Power | 50 bkW67.1 BHP |
Rated Speed | 2800 rpm |
Emissions | U.S. EPA Tier 4 Final, EU Stage IIIB |
Engine Configuration | In-Line 4, 4-Stroke-Cycle Diesel |
Bore | 84 mm (3.3 in) |
Stroke | 100 mm (3.9 in) |
Displacement | 2.2 L (135 in³) |
Aspiration | Turbocharged (T) or Turbocharged-Aftercooled (TA) |
Compression Ratio | 18:1 |
Combustion System | Direct Injection |
Rotation from Flywheel End | Counterclockwise |
Cooling System - Capacity | 4.3 L (4.5 qt) |
Lube System - Refill | 9.3 L (9.8 qt) |
Height | 736 mm (28.9 in) |
Length | 764 mm (30.07 in) |
Weight - Net Dry - Basic Operating Engine Without Optional Attachments | 230 kg (507 lbs) |
Width | 545 mm (21.5 in) |
Diameter | 155 mm (6.1 in) |
Length | 408.4 mm (16.07 in) |
Weight | 5.8 kg (12.79 lb) |
Equipment
C2.2 Standard Equipment
- Control System
- Alternator 12 volt 85 amp
- Starter motor 12 volt
- Glow plug starting aid, delivers heat directly to cylinder for best starting performance in cold weather
- Electronic control unit - chassis mounted
- Flexible and configurable software features and well supported SAE J1939 CAN bus enables highly integrated machines
- Wiring harness connectors and sensors are waterproof and designed to withstand harsh off-highway environments
- Flywheels and Flywheel Housing
- SAE No. 4 standard flywheel housing
- Choice of flywheel weight and bolting pattern to accommodate a range of industry-standard hydraulic pumps and transmissions
- Fuel System
- 2000 bar high-pressure common rail system
- Proprietary fuel filters to ensure engine protection through correct service procedures, along with water-in-fuel detection, ensures maximum machine up-time for the operator
- Lube System
- Alternative oil fillers
- Spin-on lube oil filter
- General
- Cast iron engine block
- Cast iron exhaust manifold
- Gradeability 35° continuous
- Paint: Cat yellow
- U.S. EPA Tier 4 Final, EU Stage IIIB Aftertreatment/Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC)
360° Interactive
Benefits and Features
Reliable, Quiet and Durable Power
Reliable, Quiet and Durable Power
High Performance
Fuel Efficiency
Broad Application Range
Package Size
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
Related Products