Specifications
Overview
The Cat
® C1.5 Industrial Power Unit is offered in the following rating: 27 bkW (36 bhp) @ 2800 rpm. This rating meets U.S. EPA Tier 4 Final emission standards. Rating: 24.2 bkW (32.5 bhp) @ 3000 meets EU Stage IIIA (U.S. EPA Tier 4 Interim) emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
Minimum Power | 25.1 bkW33.7 BHP |
Maximum Power | 27 bkW36 BHP |
Rated Speed | 2800-3000 rpm |
Emissions | U.S. EPA Tier 4 Final or EU Stage IIIA |
Engine Configuration | Inline 3, 4-Stroke-Cycle Diesel |
Bore | 84 mm (3.3 in) |
Stroke | 90 mm (3.5 in) |
Displacement | 1.496 L (91 in³) |
Aspiration | Naturally Aspirated (NA) |
Compression Ratio | 22.5:1 |
Rotation from Flywheel End | Counterclockwise |
Cooling System - Capacity | 5.98 L (6.3 qt) |
Lube System - Refill | 6 L (6.3 qt) |
Height | 793 mm (31.2 in) |
Length | 820 mm (32.3 in) |
Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C | 175 kg (385.8 lb) |
Width | 497 mm (19.6 in) |
Weight | 13 kg (28.7 lb) |
C1.5 Standard Equipment
- Control System
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
- Tier 4 Final: Alternator 12V 85 amp
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Mounted air cleaner
- Mounted radiator and fan
- Flywheel & Flywheel Housing
- Naturally Aspirated: SAE No. 7 1/2 flywheel
- Choice of SAE No. 4, SAE No. 5 or standard backplate flywheel housing
- Fuel System
- Fuel injection pump
- Fuel filter
- Electronic Shut-off Solenoid (ESOS)
- Lube System
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
- Power Take Off (PTO)
- Provision for timing case rear facing PTO
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request
- Tier 4 Final Aftertreatment / Clean Emissions Control Equipment
- Diesel Particulate Filter (DPF)
- Diesel Oxidation Catalyst (DOC)
- Passive regeneration system with backup
Reliable, Quiet and Durable Power
Reliable, Quiet and Durable Power
Fuel Efficiency
Broad Application Range
Broad Application Range
Package
Low Cost Maintenance
Quality
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
Tier 4 Final, Stage IIIB Aftertreatment Features
Tier 4 Final, Stage IIIB Aftertreatment Features
Specifications
Minimum Power | 25.1 bkW33.7 BHP |
Maximum Power | 27 bkW36 BHP |
Rated Speed | 2800-3000 rpm |
Emissions | U.S. EPA Tier 4 Final or EU Stage IIIA |
Engine Configuration | Inline 3, 4-Stroke-Cycle Diesel |
Bore | 84 mm (3.3 in) |
Stroke | 90 mm (3.5 in) |
Displacement | 1.496 L (91 in³) |
Aspiration | Naturally Aspirated (NA) |
Compression Ratio | 22.5:1 |
Rotation from Flywheel End | Counterclockwise |
Cooling System - Capacity | 5.98 L (6.3 qt) |
Lube System - Refill | 6 L (6.3 qt) |
Height | 793 mm (31.2 in) |
Length | 820 mm (32.3 in) |
Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C | 175 kg (385.8 lb) |
Width | 497 mm (19.6 in) |
Weight | 13 kg (28.7 lb) |
Equipment
C1.5 Standard Equipment
- Control System
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
- Tier 4 Final: Alternator 12V 85 amp
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Mounted air cleaner
- Mounted radiator and fan
- Flywheel & Flywheel Housing
- Naturally Aspirated: SAE No. 7 1/2 flywheel
- Choice of SAE No. 4, SAE No. 5 or standard backplate flywheel housing
- Fuel System
- Fuel injection pump
- Fuel filter
- Electronic Shut-off Solenoid (ESOS)
- Lube System
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
- Power Take Off (PTO)
- Provision for timing case rear facing PTO
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request
- Tier 4 Final Aftertreatment / Clean Emissions Control Equipment
- Diesel Particulate Filter (DPF)
- Diesel Oxidation Catalyst (DOC)
- Passive regeneration system with backup
360° Interactive
Benefits and Features
Reliable, Quiet and Durable Power
Reliable, Quiet and Durable Power
Fuel Efficiency
Broad Application Range
Broad Application Range
Package
Low Cost Maintenance
Quality
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
Tier 4 Final, Stage IIIB Aftertreatment Features
Tier 4 Final, Stage IIIB Aftertreatment Features
Related Products