Specifications
Overview
C1.1 Industrial Power Units, with the rating: 17.9 bkW (24 bhp) @ 3000 rpm, meet EPA Tier 4 Interim equivalent emission standards. They are available for U.S. EPA Flexibility and for Europe and, depending on applicable emission standards, may be introduced in other regulated jurisdictions. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
| Minimum Rating | 17.9 bkW24 BHP |
| Maximum Rating | 17.9 bkW24 BHP |
| Rated Speed | 3000 rpm |
| Emissions | U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. |
| Engine Configuration | Inline 3, 4-Stroke-Cycle Diesel |
| Bore | 77 mm (3.03 in) |
| Stroke | 81 mm (3.19 in) |
| Displacement | 1.131 L (69 in³) |
| Aspiration | Naturally Aspirated (NA) |
| Compression Ratio | 23:1 |
| Rotation from Flywheel End | Counterclockwise |
| Cooling System - Capacity | 5.21 L (5.5 qt) |
| Lube System - Refill | 4.9 L (5.2 qt) |
| Height | 730 mm (28.7 in) |
| Length | 778 mm (30.6 in) |
| Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C | 129 kg (284 lb) |
| Width | 438 mm (17.2 in) |
C1.1 Standard Equipment
- Control System
- Alternator 12 volt 15 amp
- Starter motor 12 volt
- Glow plug starting aid
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Mounted radiator and fan
- Flywheel and Flywheel Housing
- SAE No. 6 1/2 flywheel
- SAE No. 5 flywheel housing
- Fuel System
- Fuel injection pump
- Fuel filter
- Electronic Shut-off Solenoid (ESOS)
- Lube System
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
- Power Take Off (PTO)
- Provision for timing case rear facing PTO
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
Reliable, Quiet and Durable Power
Reliable, Quiet and Durable Power
Fuel Efficiency
Broad Application Range
Broad Application Range
Package
Low Cost Maintenance
Quality
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
Specifications
| Minimum Rating | 17.9 bkW24 BHP |
| Maximum Rating | 17.9 bkW24 BHP |
| Rated Speed | 3000 rpm |
| Emissions | U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. |
| Engine Configuration | Inline 3, 4-Stroke-Cycle Diesel |
| Bore | 77 mm (3.03 in) |
| Stroke | 81 mm (3.19 in) |
| Displacement | 1.131 L (69 in³) |
| Aspiration | Naturally Aspirated (NA) |
| Compression Ratio | 23:1 |
| Rotation from Flywheel End | Counterclockwise |
| Cooling System - Capacity | 5.21 L (5.5 qt) |
| Lube System - Refill | 4.9 L (5.2 qt) |
| Height | 730 mm (28.7 in) |
| Length | 778 mm (30.6 in) |
| Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C | 129 kg (284 lb) |
| Width | 438 mm (17.2 in) |
Equipment
C1.1 Standard Equipment
- Control System
- Alternator 12 volt 15 amp
- Starter motor 12 volt
- Glow plug starting aid
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Mounted radiator and fan
- Flywheel and Flywheel Housing
- SAE No. 6 1/2 flywheel
- SAE No. 5 flywheel housing
- Fuel System
- Fuel injection pump
- Fuel filter
- Electronic Shut-off Solenoid (ESOS)
- Lube System
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
- Power Take Off (PTO)
- Provision for timing case rear facing PTO
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
Benefits and Features
Reliable, Quiet and Durable Power
Reliable, Quiet and Durable Power
Fuel Efficiency
Broad Application Range
Broad Application Range
Package
Low Cost Maintenance
Quality
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
Related Products
