Specifications

Specifications

Length	1095 mm43.1 in
Power Range	208 bkW (280 bhp) @ 2300 rpm
Height	891 mm35.1 in
Configuration	In-line 6, 4-stroke-cycle diesel
Minimum Width	798 mm31.4 in
Emissions	U.S. EPA Tier 3 / IMO II emissions certified (commercial), RCD 2016 compliant, EU Stage IIIA compliant, CCNR Stage II through reciprocity with EU Stage IIIA
Maximum Width	850 mm33.5 in
Rated Engine Speed	2300 rpm
Minimum Engine Dry Weight	730 1609 lb
Bore	105 mm4.13 in
Maximum Engine Dry Weight	760 1676 lb
Stroke	135 mm5.31 in
Displacement	7.01 l428 in³
Aspiration	Turbocharged-aftercooled aspiration
Governor	Electronic (A5E2 V2 ECM)
Refill Capacity	Lube Oil System w/Oil filter change: 20 L (5.3 gal)
Oil Change Interval	500 hrs
Cooling	Heat exchanger or keel cooled
Flywheel Housing	SAE No. 03 with SAE 11.5 in flywheel
Rotation	Counterclockwise from flywheel end

C7.1 Tier 3 / IMO II Standard Equipment

COOLING SYSTEM
- Gear driven jacket water pump
- Corrosion resistant sea water aftercooler
- Fuel cooler

EXHAUST SYSTEM
- Watercooled turbocharger and exhaust manifold

FUEL SYSTEM
- Common rail fuel system
- Electric fuel priming pump

GENERAL
- Vibration damper and guard
- Self-tensioning multi-vee belt drive

LUBE SYSTEM
- Closed crankcase ventilation system
- Integral engine oil cooler

MOUNTING SYSTEM
- Front and rear engine mounting brackets

STARTING SYSTEM
- Starter motors - 12V or 24V

C7.1 Tier 3 / IMO II Optional Equipment

AIR INLET SYSTEM
- Various 6" water cooled exhaust elbow configurations

COOLING SYSTEM
- Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
- Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
- Jacket water heater
- Cabin heater (calorifier) connections

FUEL SYSTEM
- SOLAS double wall high pressure fuel lines kit

LUBE SYSTEM
- Left-hand and right-hand oil dipsticks
- Transmission gear oil cooler (engine mounted)

PROTECTION SYSTEM
- Additional engine and transmission sensor packages for on or off vessel monitoring

STARTING SYSTEM
- Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp
- Glow plugs

Reliability & Durability

Easy to use

Environment friendly

Specifications

Length	1095 mm43.1 in
Power Range	208 bkW (280 bhp) @ 2300 rpm
Height	891 mm35.1 in
Configuration	In-line 6, 4-stroke-cycle diesel
Minimum Width	798 mm31.4 in
Emissions	U.S. EPA Tier 3 / IMO II emissions certified (commercial), RCD 2016 compliant, EU Stage IIIA compliant, CCNR Stage II through reciprocity with EU Stage IIIA
Maximum Width	850 mm33.5 in
Rated Engine Speed	2300 rpm
Minimum Engine Dry Weight	730 1609 lb
Bore	105 mm4.13 in
Maximum Engine Dry Weight	760 1676 lb
Stroke	135 mm5.31 in
Displacement	7.01 l428 in³
Aspiration	Turbocharged-aftercooled aspiration
Governor	Electronic (A5E2 V2 ECM)
Refill Capacity	Lube Oil System w/Oil filter change: 20 L (5.3 gal)
Oil Change Interval	500 hrs
Cooling	Heat exchanger or keel cooled
Flywheel Housing	SAE No. 03 with SAE 11.5 in flywheel
Rotation	Counterclockwise from flywheel end

Equipment

C7.1 Tier 3 / IMO II Standard Equipment

COOLING SYSTEM
- Gear driven jacket water pump
- Corrosion resistant sea water aftercooler
- Fuel cooler

EXHAUST SYSTEM
- Watercooled turbocharger and exhaust manifold

FUEL SYSTEM
- Common rail fuel system
- Electric fuel priming pump

GENERAL
- Vibration damper and guard
- Self-tensioning multi-vee belt drive

LUBE SYSTEM
- Closed crankcase ventilation system
- Integral engine oil cooler

MOUNTING SYSTEM
- Front and rear engine mounting brackets

STARTING SYSTEM
- Starter motors - 12V or 24V

C7.1 Tier 3 / IMO II Optional Equipment

AIR INLET SYSTEM
- Various 6" water cooled exhaust elbow configurations

COOLING SYSTEM
- Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
- Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
- Jacket water heater
- Cabin heater (calorifier) connections

FUEL SYSTEM
- SOLAS double wall high pressure fuel lines kit

LUBE SYSTEM
- Left-hand and right-hand oil dipsticks
- Transmission gear oil cooler (engine mounted)

PROTECTION SYSTEM
- Additional engine and transmission sensor packages for on or off vessel monitoring

STARTING SYSTEM
- Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp
- Glow plugs

Specifications

Specifications

C7.1 Tier 3 / IMO II Standard Equipment

C7.1 Tier 3 / IMO II Optional Equipment

Reliability & Durability

Reliability & Durability

Easy to use

Easy to use

Environment friendly

Environment friendly

Specifications

Equipment

C7.1 Tier 3 / IMO II Standard Equipment

C7.1 Tier 3 / IMO II Optional Equipment

Benefits and Features

Reliability & Durability

Reliability & Durability

Easy to use

Easy to use

Environment friendly

Environment friendly

Related Products