3516C IMO II

Specifications

Power Range1650-3386 bhp (1230-2525 bkW)
Speed Range1200-1800 rpm
EmissionsIMO II
AspirationTTA
Bore215 mm8.46 in
Stroke170 mm7.48 in
Displacement78 l4765 in³
Rotation from Flywheel EndCounterclockwise or clockwise
ConfigurationVee 16, 4-Stroke-Cycle Diesel
Minimum Dry Weight7961 kg17550 lb
Minimum Length3637 mm143.1 in
Maximum Length3761 mm148 in
Minimum Height1967 mm77.4 in
Maximum Height2150 mm84.6 in
Minimum Width2037 mm80.2 in
Maximum Width2142 mm84.3 in

3516C IMO II Standard Equipment

  • Air Inlet System
    • Corrosion resistant separate circuit freshwater aftercooled, powercore air cleaner
  • Control System
    • Dual Caterpillar® A3 Electronic Control Unit (ECU) LH with electronic unit injector fuel system rigid wiring harness (10 amp DC power required to drive ECU)
  • Cooling System
    • Gear-driven centrifugal auxiliary sea water pump, geardriven centrifugal jacket water pump, expansion tank for commercial engines, coolant shunt tank on lightweight engines, engine oil cooler, thermostats and housing.
  • ECU Functions
    • Programmable low idle, SAEJ1939 data link, Cat® data link, engine diagnostics, general alarm relay, programmable parameters (system application and tattletales), Caterpillar ET service tool interface, remote shutdown, shutdown notify, load feedback, overspeed shutdown, overspeed verify
  • Exhaust System
    • Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with watercooled bearings and heat shield. Wastegate on select ratings
  • Fuel System
    • Electronically controlled unit injectors, simplex fuel filter (RH) with service indicators, fuel transfer pump
  • Instrumentation
    • Marine Power Display of: Engine oil pressure, engine water temperature, fuel pressure, engine speed, fuel consumption, overspeed shutdown notification light, prelube and shutdown override
  • Lube System
    • Gear-driven pump, top-mounted dual crankcase breather groups, simplex oil filter, oil filler and dipstick
  • Power Take-Offs
    • Accessory drive, two-sided front housing
  • Protection System
    • Emergency stop pushbutton, safety shutoff, oil pressure, and water temperature
  • General
    • Two lifting eyes mounted to cylinder heads, Caterpillar yellow paint, parts books and maintenance manuals, shrink-wrap.
  • ISO Certification
    • Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities.

3516C IMO II Optional Equipment

  • Air Inlet System
    • Air Cleaner Removal
    • Remote Air Inlet Adapters
  • Charging System
    • Battery Chargers
    • Charging Alternators
  • Control System
    • Throttle Position Sensor
    • Throttle Synchronization
  • Cooling System
    • Water Level Switch Gauge
    • Coolant Level Sensors
    • Connections
    • Keel Cooling Conversions
    • Heat Exchangers
    • Auxiliary Water Pumps
    • Sea Water Pump Removal
    • Coolant Shunt Tanks
    • Air Separator
    • Marine Gear Cooling
  • Exhaust System
    • Exhaust Outlet
    • Flexible Fittings
    • Elbows
    • Flanges
    • Flange and Exhaust Expanders
    • Mufflers
  • Fuel System
    • Fuel Cooler
    • Fuel Priming Pumps
    • Flexible Fuel Lines
    • Rigid Fuel Lines
    • Primary Fuel Filter
    • Fuel level switch
  • Instrumentation
    • PL1000T Communication Module
    • PL1000E Communication Module
    • Customer Interface
    • Thermocouples
    • Remote Panel Display
    • Remote Cylinder Temperature Display
    • Pilot House Instrument Panels
    • Marine Gear Sensors
    • Engine Vision Display System
  • Lube System
    • Oil Pan
    • Oil Pan Accessories
    • Sump Pumps
    • Prelubrication Options
    • Lubricating Oil
    • CENTRIFUGAL OIL FILTER
  • Mounting System
    • Engine Supports
    • Vibration Isolation Mountings
  • Power Take-Offs
    • Flexible Coupling and Guards
    • Front Housing Accessories
    • Upper Left Hand Front Location:
    • Upper Right Hand Front Location:
    • Upper Right Hand Rear Location:
    • Lower Left Hand Front Location:
    • Lower Left Hand Rear Location:
    • Front Housing Accessory Drives
    • Upper LH Accessory Drive
    • Upper RH Accessory Drive
    • Front Power Take Offs
    • Crankshaft Pulleys
    • Damper Guard Removals
  • Protection System
    • Air Inlet Shutoffs
    • Switches and Contactors
    • Explosion Relief Valve
    • Sensors
  • Spare Parts Kits
    • Parts Kits
    • Pump Kits
    • Fuel Transfer
    • Lube Oil
  • Special Appearance
    • Chrome Plated Relief Valves
    • Black Air Cleaners
  • Starting System
    • Starting Motors or Barring Device
    • Air Starting Motors Options
    • Starting Aids
    • Battery Sets - 24 Volt - Dry
    • Battery Rack
  • General
    • Tool Set
    • Caterpillar Datalink Wire

Complete Solution for Your Marine Application'

Complete Solution for Your Marine Application'

Efficient Operation

Efficient Operation

Improved Performance and Function

Improved Performance and Function

Environmentally Conscious

Environmentally Conscious

Specifications

Power Range1650-3386 bhp (1230-2525 bkW)
Speed Range1200-1800 rpm
EmissionsIMO II
AspirationTTA
Bore215 mm8.46 in
Stroke170 mm7.48 in
Displacement78 l4765 in³
Rotation from Flywheel EndCounterclockwise or clockwise
ConfigurationVee 16, 4-Stroke-Cycle Diesel
Minimum Dry Weight7961 kg17550 lb
Minimum Length3637 mm143.1 in
Maximum Length3761 mm148 in
Minimum Height1967 mm77.4 in
Maximum Height2150 mm84.6 in
Minimum Width2037 mm80.2 in
Maximum Width2142 mm84.3 in

Equipment

3516C IMO II Standard Equipment

  • Air Inlet System
    • Corrosion resistant separate circuit freshwater aftercooled, powercore air cleaner
  • Control System
    • Dual Caterpillar® A3 Electronic Control Unit (ECU) LH with electronic unit injector fuel system rigid wiring harness (10 amp DC power required to drive ECU)
  • Cooling System
    • Gear-driven centrifugal auxiliary sea water pump, geardriven centrifugal jacket water pump, expansion tank for commercial engines, coolant shunt tank on lightweight engines, engine oil cooler, thermostats and housing.
  • ECU Functions
    • Programmable low idle, SAEJ1939 data link, Cat® data link, engine diagnostics, general alarm relay, programmable parameters (system application and tattletales), Caterpillar ET service tool interface, remote shutdown, shutdown notify, load feedback, overspeed shutdown, overspeed verify
  • Exhaust System
    • Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with watercooled bearings and heat shield. Wastegate on select ratings
  • Fuel System
    • Electronically controlled unit injectors, simplex fuel filter (RH) with service indicators, fuel transfer pump
  • Instrumentation
    • Marine Power Display of: Engine oil pressure, engine water temperature, fuel pressure, engine speed, fuel consumption, overspeed shutdown notification light, prelube and shutdown override
  • Lube System
    • Gear-driven pump, top-mounted dual crankcase breather groups, simplex oil filter, oil filler and dipstick
  • Power Take-Offs
    • Accessory drive, two-sided front housing
  • Protection System
    • Emergency stop pushbutton, safety shutoff, oil pressure, and water temperature
  • General
    • Two lifting eyes mounted to cylinder heads, Caterpillar yellow paint, parts books and maintenance manuals, shrink-wrap.
  • ISO Certification
    • Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities.

3516C IMO II Optional Equipment

  • Air Inlet System
    • Air Cleaner Removal
    • Remote Air Inlet Adapters
  • Charging System
    • Battery Chargers
    • Charging Alternators
  • Control System
    • Throttle Position Sensor
    • Throttle Synchronization
  • Cooling System
    • Water Level Switch Gauge
    • Coolant Level Sensors
    • Connections
    • Keel Cooling Conversions
    • Heat Exchangers
    • Auxiliary Water Pumps
    • Sea Water Pump Removal
    • Coolant Shunt Tanks
    • Air Separator
    • Marine Gear Cooling
  • Exhaust System
    • Exhaust Outlet
    • Flexible Fittings
    • Elbows
    • Flanges
    • Flange and Exhaust Expanders
    • Mufflers
  • Fuel System
    • Fuel Cooler
    • Fuel Priming Pumps
    • Flexible Fuel Lines
    • Rigid Fuel Lines
    • Primary Fuel Filter
    • Fuel level switch
  • Instrumentation
    • PL1000T Communication Module
    • PL1000E Communication Module
    • Customer Interface
    • Thermocouples
    • Remote Panel Display
    • Remote Cylinder Temperature Display
    • Pilot House Instrument Panels
    • Marine Gear Sensors
    • Engine Vision Display System
  • Lube System
    • Oil Pan
    • Oil Pan Accessories
    • Sump Pumps
    • Prelubrication Options
    • Lubricating Oil
    • CENTRIFUGAL OIL FILTER
  • Mounting System
    • Engine Supports
    • Vibration Isolation Mountings
  • Power Take-Offs
    • Flexible Coupling and Guards
    • Front Housing Accessories
    • Upper Left Hand Front Location:
    • Upper Right Hand Front Location:
    • Upper Right Hand Rear Location:
    • Lower Left Hand Front Location:
    • Lower Left Hand Rear Location:
    • Front Housing Accessory Drives
    • Upper LH Accessory Drive
    • Upper RH Accessory Drive
    • Front Power Take Offs
    • Crankshaft Pulleys
    • Damper Guard Removals
  • Protection System
    • Air Inlet Shutoffs
    • Switches and Contactors
    • Explosion Relief Valve
    • Sensors
  • Spare Parts Kits
    • Parts Kits
    • Pump Kits
    • Fuel Transfer
    • Lube Oil
  • Special Appearance
    • Chrome Plated Relief Valves
    • Black Air Cleaners
  • Starting System
    • Starting Motors or Barring Device
    • Air Starting Motors Options
    • Starting Aids
    • Battery Sets - 24 Volt - Dry
    • Battery Rack
  • General
    • Tool Set
    • Caterpillar Datalink Wire

Benefits and Features

Complete Solution for Your Marine Application'

Complete Solution for Your Marine Application'

Efficient Operation

Efficient Operation

Improved Performance and Function

Improved Performance and Function

Environmentally Conscious

Environmentally Conscious

Related Products

Loading