C280-12 Tier 4

Specifications

Power Range4962-5444 bhp (3700-4060 bkW)
Speed Range1000 rpm
EmissionsEPA Tier 4, IMO II
AspirationTTA
Bore280 mm11 in
Stroke300 mm11.8 in
Displacement222 l13546 in³
Rotation from Flywheel EndCounterclockwise or clockwise
ConfigurationVee 12, 4-Stroke-Cycle Diesel
Minimum Dry Weight25980 kg57276 lb
Minimum Length4623 mm182 in
Maximum Length4623 mm182 in
Minimum Height3404 mm134 in
Maximum Height3404 mm134 in
Minimum Width2032 mm80 in
Maximum Width2032 mm80 in

C280-12 Tier 4 Standard Equipment

  • Air Inlet System
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Air inlet shutoff
    • Breather, crankcase, top-mounted
    • Turbocharger, engine oil lubricated
  • Control System
    • Dual Caterpillar A-III Electronic Engine Control Modules with Electronic Unit Injector Fuel System
    • Rigid Wiring Harness (10 amp 24volt power required to drive Electronic Engine Control Modules)
  • Cooling System
    • Engine coolant water drains
  • Exhaust System
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38 degrees C)
    • Fuel transfer pump (mounted on left hand side)
    • Duplex fuel filters
    • Electronically Controlled Unit Injectors
  • Lube Systems
    • Centrifugal oil filters with single shutoff. Service side engine mounted on cylinder block inspection covers. Includes installed oil lines and single shutoff valve. Filters centrifuge bypass oil from the main lubricating oil pump. Can be serviced with the engine running.
    • Oil filler and dipstick
    • Valve, oil pressure regulating
    • Valves, crankcase explosion relief
  • General
    • Paint, Caterpillar yellow
    • Pumps, gear driven: fuel, oil, jacket water, aftercooler/oil cooler water

C280-12 Tier 4 Optional Equipment

  • Engine Application/Design Control
    • Crankshaft Deflection Marks
    • Extra Mounting Feet
  • Engine Package Description
    • Front Auxiliary Drive
    • Stub Shaft Certification
  • Air Inlet System
    • Air Cleaners
    • Air Cleaner options
  • Cooling System
    • Auxiliary Water Pump
    • Jacket Water Heaters
    • Heat Recovery System
    • Heat Recovery Thermostats
    • De-Aerator
    • Connections for Driven Equipment
    • Cooling System Connection Groups
  • Exhaust System
    • Outlet Expander
    • Flexible Exhaust Fittings
    • Weld Flange
  • Fuel System
    • Fuel Priming Pump
    • Duplex Primary Fuel Strainer
    • Fuel Systems Connections
  • Lube System
    • Oil Pan Drain Valve
    • Lube Connections
    • Lube Oil Heater
  • Marine Society Requirements
    • Spray Shielding
  • Protection System
    • Monitoring System
    • Turbocharger Speed Sensor
    • Cylinder Pressure Relief Valve
    • Oil Mist Detector
  • Spare Parts Kits
    • Intake and Air System
    • Basic Engine
    • Cylinder Head
    • Fuel System
    • Cooling System
    • Instrumentation
    • Cylinder Valve Kits
  • Starting System
    • Boost Control Valve, Pressure Reducing Valve
  • Engine Testing
    • Basic System Testing
    • Special Witness Test
    • Customer Selected Test Points
    • Marine Limit Line Test
    • Propeller Demand Curve Test
  • Service Tools/Ship Protection/Factor Support
    • Commissioning
    • Service Tools
    • Shipping Protection - Export Boxing
    • AID Emblem
    • Storage Preservation

Specifications

Power Range4962-5444 bhp (3700-4060 bkW)
Speed Range1000 rpm
EmissionsEPA Tier 4, IMO II
AspirationTTA
Bore280 mm11 in
Stroke300 mm11.8 in
Displacement222 l13546 in³
Rotation from Flywheel EndCounterclockwise or clockwise
ConfigurationVee 12, 4-Stroke-Cycle Diesel
Minimum Dry Weight25980 kg57276 lb
Minimum Length4623 mm182 in
Maximum Length4623 mm182 in
Minimum Height3404 mm134 in
Maximum Height3404 mm134 in
Minimum Width2032 mm80 in
Maximum Width2032 mm80 in

Equipment

C280-12 Tier 4 Standard Equipment

  • Air Inlet System
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Air inlet shutoff
    • Breather, crankcase, top-mounted
    • Turbocharger, engine oil lubricated
  • Control System
    • Dual Caterpillar A-III Electronic Engine Control Modules with Electronic Unit Injector Fuel System
    • Rigid Wiring Harness (10 amp 24volt power required to drive Electronic Engine Control Modules)
  • Cooling System
    • Engine coolant water drains
  • Exhaust System
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38 degrees C)
    • Fuel transfer pump (mounted on left hand side)
    • Duplex fuel filters
    • Electronically Controlled Unit Injectors
  • Lube Systems
    • Centrifugal oil filters with single shutoff. Service side engine mounted on cylinder block inspection covers. Includes installed oil lines and single shutoff valve. Filters centrifuge bypass oil from the main lubricating oil pump. Can be serviced with the engine running.
    • Oil filler and dipstick
    • Valve, oil pressure regulating
    • Valves, crankcase explosion relief
  • General
    • Paint, Caterpillar yellow
    • Pumps, gear driven: fuel, oil, jacket water, aftercooler/oil cooler water

C280-12 Tier 4 Optional Equipment

  • Engine Application/Design Control
    • Crankshaft Deflection Marks
    • Extra Mounting Feet
  • Engine Package Description
    • Front Auxiliary Drive
    • Stub Shaft Certification
  • Air Inlet System
    • Air Cleaners
    • Air Cleaner options
  • Cooling System
    • Auxiliary Water Pump
    • Jacket Water Heaters
    • Heat Recovery System
    • Heat Recovery Thermostats
    • De-Aerator
    • Connections for Driven Equipment
    • Cooling System Connection Groups
  • Exhaust System
    • Outlet Expander
    • Flexible Exhaust Fittings
    • Weld Flange
  • Fuel System
    • Fuel Priming Pump
    • Duplex Primary Fuel Strainer
    • Fuel Systems Connections
  • Lube System
    • Oil Pan Drain Valve
    • Lube Connections
    • Lube Oil Heater
  • Marine Society Requirements
    • Spray Shielding
  • Protection System
    • Monitoring System
    • Turbocharger Speed Sensor
    • Cylinder Pressure Relief Valve
    • Oil Mist Detector
  • Spare Parts Kits
    • Intake and Air System
    • Basic Engine
    • Cylinder Head
    • Fuel System
    • Cooling System
    • Instrumentation
    • Cylinder Valve Kits
  • Starting System
    • Boost Control Valve, Pressure Reducing Valve
  • Engine Testing
    • Basic System Testing
    • Special Witness Test
    • Customer Selected Test Points
    • Marine Limit Line Test
    • Propeller Demand Curve Test
  • Service Tools/Ship Protection/Factor Support
    • Commissioning
    • Service Tools
    • Shipping Protection - Export Boxing
    • AID Emblem
    • Storage Preservation

Related Products

Loading