Specifications

C7.1 Tier 3 / IMO II

Specifications

Length1095 mm43.1 in
Minimum Rating208 bkW280 BHP
Height891 mm35.1 in
Maximum Rating317 bkW425 BHP
Minimum Width798 mm31.4 in
ConfigurationIn-line 6, 4-stroke-cycle diesel
Maximum Width850 mm33.5 in
EmissionsU.S. EPA Tier 3 / IMO II emissions certified (commercial), RCD 2016 compliant, EU Stage IIIA compliant, CCNR Stage II through reciprocity with EU Stage IIIA
Minimum Engine Dry Weight730 1609 lb
Rated Engine Speed2300 - 2700 rpm
Maximum Engine Dry Weight760 1676 lb
Bore105 mm4.13 in
Stroke135 mm5.31 in
Displacement7.01 l428 in³
AspirationTurbocharged-aftercooled aspiration
GovernorElectronic (A5E2 V2 ECM)
Refill CapacityLube Oil System w/Oil filter change: 20 L (5.3 gal)
Oil Change Interval500 hrs
CoolingHeat exchanger or keel cooled
Flywheel HousingSAE No. 03 with SAE 11.5 in flywheel
RotationCounterclockwise from flywheel end

C7.1 Tier 3 / IMO II Standard Equipment

  • COOLING SYSTEM
    • Gear driven jacket water pump
    • Corrosion resistant sea water aftercooler
    • Fuel cooler
  • EXHAUST SYSTEM
    • Watercooled turbocharger and exhaust manifold
  • FUEL SYSTEM
    • Common rail fuel system
    • Electric fuel priming pump
  • GENERAL
    • Vibration damper and guard
    • Self-tensioning multi-vee belt drive
  • LUBE SYSTEM
    • Closed crankcase ventilation system
    • Integral engine oil cooler
  • MOUNTING SYSTEM
    • Front and rear engine mounting brackets
  • STARTING SYSTEM
    • Starter motors - 12V or 24V

C7.1 Tier 3 / IMO II Optional Equipment

  • AIR INLET SYSTEM
    • Various 6" water cooled exhaust elbow configurations
  • COOLING SYSTEM
    • Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
    • Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
    • Jacket water heater
    • Cabin heater (calorifier) connections
  • FUEL SYSTEM
    • SOLAS double wall high pressure fuel lines kit
  • LUBE SYSTEM
    • Left-hand and right-hand oil dipsticks
    • Transmission gear oil cooler (engine mounted)
  • PROTECTION SYSTEM
    • Additional engine and transmission sensor packages for on or off vessel monitoring
  • STARTING SYSTEM
    • Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp
    • Glow plugs

Reliability & Durability

Reliability & Durability

Easy to use

Easy to use

Environment friendly

Environment friendly

Specifications

Length1095 mm43.1 in
Minimum Rating208 bkW280 BHP
Height891 mm35.1 in
Maximum Rating317 bkW425 BHP
Minimum Width798 mm31.4 in
ConfigurationIn-line 6, 4-stroke-cycle diesel
Maximum Width850 mm33.5 in
EmissionsU.S. EPA Tier 3 / IMO II emissions certified (commercial), RCD 2016 compliant, EU Stage IIIA compliant, CCNR Stage II through reciprocity with EU Stage IIIA
Minimum Engine Dry Weight730 1609 lb
Rated Engine Speed2300 - 2700 rpm
Maximum Engine Dry Weight760 1676 lb
Bore105 mm4.13 in
Stroke135 mm5.31 in
Displacement7.01 l428 in³
AspirationTurbocharged-aftercooled aspiration
GovernorElectronic (A5E2 V2 ECM)
Refill CapacityLube Oil System w/Oil filter change: 20 L (5.3 gal)
Oil Change Interval500 hrs
CoolingHeat exchanger or keel cooled
Flywheel HousingSAE No. 03 with SAE 11.5 in flywheel
RotationCounterclockwise from flywheel end

Equipment

C7.1 Tier 3 / IMO II Standard Equipment

  • COOLING SYSTEM
    • Gear driven jacket water pump
    • Corrosion resistant sea water aftercooler
    • Fuel cooler
  • EXHAUST SYSTEM
    • Watercooled turbocharger and exhaust manifold
  • FUEL SYSTEM
    • Common rail fuel system
    • Electric fuel priming pump
  • GENERAL
    • Vibration damper and guard
    • Self-tensioning multi-vee belt drive
  • LUBE SYSTEM
    • Closed crankcase ventilation system
    • Integral engine oil cooler
  • MOUNTING SYSTEM
    • Front and rear engine mounting brackets
  • STARTING SYSTEM
    • Starter motors - 12V or 24V

C7.1 Tier 3 / IMO II Optional Equipment

  • AIR INLET SYSTEM
    • Various 6" water cooled exhaust elbow configurations
  • COOLING SYSTEM
    • Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
    • Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
    • Jacket water heater
    • Cabin heater (calorifier) connections
  • FUEL SYSTEM
    • SOLAS double wall high pressure fuel lines kit
  • LUBE SYSTEM
    • Left-hand and right-hand oil dipsticks
    • Transmission gear oil cooler (engine mounted)
  • PROTECTION SYSTEM
    • Additional engine and transmission sensor packages for on or off vessel monitoring
  • STARTING SYSTEM
    • Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp
    • Glow plugs

Benefits and Features

Reliability & Durability

Reliability & Durability

Easy to use

Easy to use

Environment friendly

Environment friendly

Related Products

Model.GetDictionaryValue(