VM 32 C

Specifications

Power Range6000-8000 kW
Speed Range720-750 rpm
EmissionsIMO II
AspirationTurbocharged
Bore320 mm12.6 in
Stroke460 mm18.11 in
Rotation from Flywheel EndCounterclockwise/Clockwise
Configuration12,16 Cylinder
Swept Volume37 l2257.88 in³
Minimum Dry Weight65 ton (US)143300 lb
Minimum Length6956 mm273.9 in
Maximum Length8328 mm327.9 in
Minimum Height3524 mm138.7 in
Maximum Height3524 mm138.7 in
Minimum Width2985 mm117.5 in
Maximum Width2985 mm117.5 in

VM 32 C Standard Equipment

  • Air Inlet System
    • Air intake silencer/filter
  • Control System
    • Speed governor cabinet incl. load sharing unit (for multiple engine plant only)
    • Protection system (external cabinet)
    • Serial link interface (MODbus/canbus)
    • Start/stop panel
    • Protection panel (emergency stop, override, reset push buttons)
  • Cooling System
    • 2-stage charge air cooler
    • HT cooling water pump (engine driven)
    • Electronic cooling water preheater
  • Exhaust System
    • Turbocharger at flywheel end
    • Exhaust gas expansion joint
    • Exhaust gas insulated manifolds
  • Fuel System
    • Fuel indicator filter
    • Fuel circulating pump (electronically driven/for MDO/MGO only)
    • Fuel pressure valve (separate/for MDO/MGO only)
  • Instrumentation
    • Local control panel
    • Pressure and temperature indicator
    • Control push buttons and lamps
    • Emergency stop lever
  • Lube System
    • Lube oil pump (engine driven)
    • Pressure regulating valve
    • Lube oil safety filter
    • Lube oil self-cleaning filter
    • Lube oil plate cooler (separate)
    • Dry sump
  • Mounting System
    • Rigid mounting
    • High flexible coupling
  • Starting System
    • Starting air valve
    • Electrical barring device
  • General
    • Torsional Vibration Calculation (TVC)
    • Lifting device (rental)

VM 32 C Optional Equipment

  • Air Inlet System
    • Air inlet transition piece
    • Expansion joint
    • Silencer/filter
    • Air inlet shut-off valve
  • Control System
    • Engine alarm system
    • Remote control system
    • Starter for electric driven pumps
    • 24 DC UPS
    • Remote indicators (start air pressure, engine speed, etc.)
  • Cooling System
    • HT cooling water pump (electric driven)
    • LT cooling water pump (electric driven)
    • Sea water cooling pump (electric driven)
    • FW/SW plate cooler
    • Temperature control valve
    • Steam / thermal oil cooling water preheater
  • Exhaust System
    • Turbocharger at counter flywheel side
    • Silencer (with or without spart arrester)
  • Fuel System
    • HFO treatment and supply modules
    • HFO supply and booster pumps (electrical driven)
    • HFO self-cleaning automatic filter
    • Mixing tank
    • HFO pressure regulating valve
    • HFO final preheater
    • HFO viscosity control device
    • Fuel oil cooler
  • Lube System
    • Lube oil treatment and combined modules
    • Lube oil pump (electrical driven)
    • Temperature control valve
    • Pre-lubricating oil pump (electrical driven)
    • Wet sump with dip stick
    • Lube oil centrifuge
  • Mounting System
    • Resilient mounting
    • Flexible pipe connections
  • Starting System
    • Starting air receiver
    • Starting air compressor
  • General
    • PTO shaft on counter flywheel side
    • Engine PTO coupling
    • Reduction gear
    • Reduction gear PTO coupling
    • PTO alternator
    • Cat Propulsion Systems

Specifications

Power Range6000-8000 kW
Speed Range720-750 rpm
EmissionsIMO II
AspirationTurbocharged
Bore320 mm12.6 in
Stroke460 mm18.11 in
Rotation from Flywheel EndCounterclockwise/Clockwise
Configuration12,16 Cylinder
Swept Volume37 l2257.88 in³
Minimum Dry Weight65 ton (US)143300 lb
Minimum Length6956 mm273.9 in
Maximum Length8328 mm327.9 in
Minimum Height3524 mm138.7 in
Maximum Height3524 mm138.7 in
Minimum Width2985 mm117.5 in
Maximum Width2985 mm117.5 in

Equipment

VM 32 C Standard Equipment

  • Air Inlet System
    • Air intake silencer/filter
  • Control System
    • Speed governor cabinet incl. load sharing unit (for multiple engine plant only)
    • Protection system (external cabinet)
    • Serial link interface (MODbus/canbus)
    • Start/stop panel
    • Protection panel (emergency stop, override, reset push buttons)
  • Cooling System
    • 2-stage charge air cooler
    • HT cooling water pump (engine driven)
    • Electronic cooling water preheater
  • Exhaust System
    • Turbocharger at flywheel end
    • Exhaust gas expansion joint
    • Exhaust gas insulated manifolds
  • Fuel System
    • Fuel indicator filter
    • Fuel circulating pump (electronically driven/for MDO/MGO only)
    • Fuel pressure valve (separate/for MDO/MGO only)
  • Instrumentation
    • Local control panel
    • Pressure and temperature indicator
    • Control push buttons and lamps
    • Emergency stop lever
  • Lube System
    • Lube oil pump (engine driven)
    • Pressure regulating valve
    • Lube oil safety filter
    • Lube oil self-cleaning filter
    • Lube oil plate cooler (separate)
    • Dry sump
  • Mounting System
    • Rigid mounting
    • High flexible coupling
  • Starting System
    • Starting air valve
    • Electrical barring device
  • General
    • Torsional Vibration Calculation (TVC)
    • Lifting device (rental)

VM 32 C Optional Equipment

  • Air Inlet System
    • Air inlet transition piece
    • Expansion joint
    • Silencer/filter
    • Air inlet shut-off valve
  • Control System
    • Engine alarm system
    • Remote control system
    • Starter for electric driven pumps
    • 24 DC UPS
    • Remote indicators (start air pressure, engine speed, etc.)
  • Cooling System
    • HT cooling water pump (electric driven)
    • LT cooling water pump (electric driven)
    • Sea water cooling pump (electric driven)
    • FW/SW plate cooler
    • Temperature control valve
    • Steam / thermal oil cooling water preheater
  • Exhaust System
    • Turbocharger at counter flywheel side
    • Silencer (with or without spart arrester)
  • Fuel System
    • HFO treatment and supply modules
    • HFO supply and booster pumps (electrical driven)
    • HFO self-cleaning automatic filter
    • Mixing tank
    • HFO pressure regulating valve
    • HFO final preheater
    • HFO viscosity control device
    • Fuel oil cooler
  • Lube System
    • Lube oil treatment and combined modules
    • Lube oil pump (electrical driven)
    • Temperature control valve
    • Pre-lubricating oil pump (electrical driven)
    • Wet sump with dip stick
    • Lube oil centrifuge
  • Mounting System
    • Resilient mounting
    • Flexible pipe connections
  • Starting System
    • Starting air receiver
    • Starting air compressor
  • General
    • PTO shaft on counter flywheel side
    • Engine PTO coupling
    • Reduction gear
    • Reduction gear PTO coupling
    • PTO alternator
    • Cat Propulsion Systems

Related Products

Loading