Specifications

Get a Quote
C9 ACERT

Specifications

Power Range 503-567 bhp (375-423 bkW)
Speed Range 2500 rpm
Emissions IMO II
Aspiration TA
Bore 112 mm4.41 in
Stroke 149 mm5.87 in
Displacement 8.8 l538 in³
Rotation from Flywheel End Counterclockwise
Configuration In-line 6, 4-Stroke-Cycle Diesel
Approximate Engine Dry Weight 946 kg2086 lb
Height 983 mm38.7 in
Length 1198 mm47.2 in
Width - Engine 974 mm38.3 in

C9 ACERT Standard Equipment

  • Air Inlet System
    • Aftercooler (sea water)
    • Air Cleaner/Fumes Disposal (closed crankcase) - shipped loose
    • Turbocharger
  • Control Panels
    • Electronic governor
    • Hydraulic Electronic Unit Injection (HEUI) fuel system
    • Electronic Control Module (ECM)
    • Engine mounted 70-pin dedicated customer connector
    • SAE J1939 data link
  • Cooling System
    • Thermostat and housing
    • Jacket water pump, belt driven, centrifugal
    • Auxiliary sea water pump, gear driven
    • Expansion tank (heat exchanger engines only)
    • Engine mounted heat exchanger, removable tube bundle (for sea water) (heat exchanger engines only)
    • Engine oil cooler
    • Auxiliary sea water lines
    • Transmission oil cooler
  • Flywheel & Flywheel Housings
    • Flywheel, SAE No. 1, 113 teeth
    • Flywheel housing, SAE No. 1
  • Fuel System
    • Fuel filter, RH service on Port, LH service on starboard
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil filter, front center service
    • Oil filler, in valve cover
    • Oil level gauge, RH service on port, LH service on starboard
    • Oil pan
    • Oil pan drain, RH service on port, LH service on starboard
    • Engine oil pump (gear driven)
  • Mounting System
    • Front support, adjustable height
  • Protection System
    • Overspeed shutoff - electronic
  • General
    • Torsional vibration damper and guard
    • Lifting eyes
    • Literature
    • Engine wiring
    • RH or LH service options

C9 ACERT Optional Equipment

  • Cooling System
    • Coolant level sensor
  • Exhaust System
    • Exhaust Temp Sensor
    • Watercooled Elbows
  • Fuel System
    • Fuel cooler
    • Flexible fuel lines
  • Instrumentation
    • OEM Wiring Harness
    • Engine to Engine Harness
    • Wiring Harness
    • Transmission Sensors
    • Marine Power Display System
    • Marine Power Display
    • Marine Power Display Bracket
  • Lube System
    • Oil Filler
    • Sump pumps, manual
    • Sump pump lines
  • Mounting System
    • Vibration isolators
  • Power Take-Offs
    • Crankshaft pulley
    • Damper and Stub Shaft
    • Pulley and Stub Shaft
  • General
    • Damper Guard
    • Belt Guard - Alternator
  • Packing
    • Engine Protective Cover
    • Export Packing

C9 ACERT Features & Benefits

C9 ACERT Features & Benefits

Specifications

Power Range 503-567 bhp (375-423 bkW)
Speed Range 2500 rpm
Emissions IMO II
Aspiration TA
Bore 112 mm4.41 in
Stroke 149 mm5.87 in
Displacement 8.8 l538 in³
Rotation from Flywheel End Counterclockwise
Configuration In-line 6, 4-Stroke-Cycle Diesel
Approximate Engine Dry Weight 946 kg2086 lb
Height 983 mm38.7 in
Length 1198 mm47.2 in
Width - Engine 974 mm38.3 in

Equipment

C9 ACERT Standard Equipment

  • Air Inlet System
    • Aftercooler (sea water)
    • Air Cleaner/Fumes Disposal (closed crankcase) - shipped loose
    • Turbocharger
  • Control Panels
    • Electronic governor
    • Hydraulic Electronic Unit Injection (HEUI) fuel system
    • Electronic Control Module (ECM)
    • Engine mounted 70-pin dedicated customer connector
    • SAE J1939 data link
  • Cooling System
    • Thermostat and housing
    • Jacket water pump, belt driven, centrifugal
    • Auxiliary sea water pump, gear driven
    • Expansion tank (heat exchanger engines only)
    • Engine mounted heat exchanger, removable tube bundle (for sea water) (heat exchanger engines only)
    • Engine oil cooler
    • Auxiliary sea water lines
    • Transmission oil cooler
  • Flywheel & Flywheel Housings
    • Flywheel, SAE No. 1, 113 teeth
    • Flywheel housing, SAE No. 1
  • Fuel System
    • Fuel filter, RH service on Port, LH service on starboard
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil filter, front center service
    • Oil filler, in valve cover
    • Oil level gauge, RH service on port, LH service on starboard
    • Oil pan
    • Oil pan drain, RH service on port, LH service on starboard
    • Engine oil pump (gear driven)
  • Mounting System
    • Front support, adjustable height
  • Protection System
    • Overspeed shutoff - electronic
  • General
    • Torsional vibration damper and guard
    • Lifting eyes
    • Literature
    • Engine wiring
    • RH or LH service options

C9 ACERT Optional Equipment

  • Cooling System
    • Coolant level sensor
  • Exhaust System
    • Exhaust Temp Sensor
    • Watercooled Elbows
  • Fuel System
    • Fuel cooler
    • Flexible fuel lines
  • Instrumentation
    • OEM Wiring Harness
    • Engine to Engine Harness
    • Wiring Harness
    • Transmission Sensors
    • Marine Power Display System
    • Marine Power Display
    • Marine Power Display Bracket
  • Lube System
    • Oil Filler
    • Sump pumps, manual
    • Sump pump lines
  • Mounting System
    • Vibration isolators
  • Power Take-Offs
    • Crankshaft pulley
    • Damper and Stub Shaft
    • Pulley and Stub Shaft
  • General
    • Damper Guard
    • Belt Guard - Alternator
  • Packing
    • Engine Protective Cover
    • Export Packing

Benefits and Features

C9 ACERT Features & Benefits

C9 ACERT Features & Benefits

Related Products

C9 ACERT
Products
footer-border

© 2022 Caterpillar. All Rights Reserved. Cat, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Facebook YouTube LinkedIn
Model.GetDictionaryValue(