C18 (SRMP) Marine Generator Set

Specifications

Minimum Rating260 ekW (325 kVA)
Maximum Rating565 ekW (706 kVA)
Frequency50 hz
Speed50 Hz - 1500 rpm, 60 Hz - 1800 rpm
ConfigurationIn-line 6, 4-Stroke-Cycle Diesel
AspirationTurbocharged - aftercooled
Bore145 mm5.7 in
Stroke183 mm7.2 in
Fuel SystemMEUI
EmissionsEPA Tier 3, IMO II, EU IW
Height1648 mm64.9 in
Length3038 mm119.6 in
Height2408 mm94.8 in
Length4741 mm55.6 in
ExcitationSRMP
InsulationClass H
IP RatingIP23 (standard), IP 44 (optional)
Voltage RegulatorCDVR (Digital Voltage)
Weight - Approximate4221 kg9747 lb
Width1411 mm55.6 in
Weight - Approximate6076 kg13396 lb
Width1699 mm66.9 in

C18 (SRMP) Marine Generator Set Standard Equipment

  • Air inlet system
    • Separate circuit after-cooled (SCAC)
    • Heavy-duty inlet air filter
  • Cooling system
    • SCAC pump, gear driven, for HEX cooled engines only
    • Jacket water pump, gear driven
    • SCAC and JW shunt tanks for maintaining proper pump inlet pressures
  • Exhaust system
    • Water-cooled exhaust manifold & turbocharger
    • Round flanged exhaust outlet
  • Fuel system
    • Hybrid fuel lines
    • MEUI™ fuel system
    • Fuel filter, front service
    • Fuel transfer and priming pumps
  • Lube system
    • Center sump oil pan, deep
    • Front and top service oil filler locations
    • Front service dipstick
  • Mounting system
    • Vibration Isolators
    • Formed C-channel rails
  • Control system
    • Electronic fuel/air ratio control
    • SRMP permanent magnet 12-lead generator
    • Digital voltage regulator
    • Class H insulation, Class F temperature rise, IP23 protection

C18 (SRMP) Marine Generator Set Optional Equipment

  • Exhaust system
    • Dry Elbows
    • Water-Cooled Elbows
    • Flexible Fitting
    • Flange
    • Muffler
    • Muffler, Spark Arresting
    • Fumes disposal (closed system)
  • Air inlet system
    • Air Inlet Adapter
  • Charging system
    • Battery Chargers 10 amp
    • Battery sets: 24V 950-1300 CCA
    • Charging alternator 24V 105 amp
  • Control system
    • Caterpillar alarm and protection
    • EMCP 4.2 control panel
    • MGCP III B control panel
  • Fuel system
    • Duplex fuel filter – front service
    • Fuel cooler
    • Primary fuel/water separator
  • Instrumentation
    • Generator service side - LH, RH
    • Generator terminal box extension
    • Load sharing module (option for type approved module)
  • Lube system
    • Spare pump kits
    • Duplex oil filter – front service
    • Manual sump pump
  • Mounting system
    • Vibration Isolators
  • Protection system
    • Generator protection - IP44
  • Starting system
    • Starting motors - electric and/or air
    • Jacket water heaters

Exterior

Specifications

Minimum Rating260 ekW (325 kVA)
Maximum Rating565 ekW (706 kVA)
Frequency50 hz
Speed50 Hz - 1500 rpm, 60 Hz - 1800 rpm
ConfigurationIn-line 6, 4-Stroke-Cycle Diesel
AspirationTurbocharged - aftercooled
Bore145 mm5.7 in
Stroke183 mm7.2 in
Fuel SystemMEUI
EmissionsEPA Tier 3, IMO II, EU IW
Height1648 mm64.9 in
Length3038 mm119.6 in
Height2408 mm94.8 in
Length4741 mm55.6 in
ExcitationSRMP
InsulationClass H
IP RatingIP23 (standard), IP 44 (optional)
Voltage RegulatorCDVR (Digital Voltage)
Weight - Approximate4221 kg9747 lb
Width1411 mm55.6 in
Weight - Approximate6076 kg13396 lb
Width1699 mm66.9 in

Equipment

C18 (SRMP) Marine Generator Set Standard Equipment

  • Air inlet system
    • Separate circuit after-cooled (SCAC)
    • Heavy-duty inlet air filter
  • Cooling system
    • SCAC pump, gear driven, for HEX cooled engines only
    • Jacket water pump, gear driven
    • SCAC and JW shunt tanks for maintaining proper pump inlet pressures
  • Exhaust system
    • Water-cooled exhaust manifold & turbocharger
    • Round flanged exhaust outlet
  • Fuel system
    • Hybrid fuel lines
    • MEUI™ fuel system
    • Fuel filter, front service
    • Fuel transfer and priming pumps
  • Lube system
    • Center sump oil pan, deep
    • Front and top service oil filler locations
    • Front service dipstick
  • Mounting system
    • Vibration Isolators
    • Formed C-channel rails
  • Control system
    • Electronic fuel/air ratio control
    • SRMP permanent magnet 12-lead generator
    • Digital voltage regulator
    • Class H insulation, Class F temperature rise, IP23 protection

C18 (SRMP) Marine Generator Set Optional Equipment

  • Exhaust system
    • Dry Elbows
    • Water-Cooled Elbows
    • Flexible Fitting
    • Flange
    • Muffler
    • Muffler, Spark Arresting
    • Fumes disposal (closed system)
  • Air inlet system
    • Air Inlet Adapter
  • Charging system
    • Battery Chargers 10 amp
    • Battery sets: 24V 950-1300 CCA
    • Charging alternator 24V 105 amp
  • Control system
    • Caterpillar alarm and protection
    • EMCP 4.2 control panel
    • MGCP III B control panel
  • Fuel system
    • Duplex fuel filter – front service
    • Fuel cooler
    • Primary fuel/water separator
  • Instrumentation
    • Generator service side - LH, RH
    • Generator terminal box extension
    • Load sharing module (option for type approved module)
  • Lube system
    • Spare pump kits
    • Duplex oil filter – front service
    • Manual sump pump
  • Mounting system
    • Vibration Isolators
  • Protection system
    • Generator protection - IP44
  • Starting system
    • Starting motors - electric and/or air
    • Jacket water heaters

360° Interactive

Exterior

Related Products

Loading