C280-16

Specifications

Minimum Rating4700 ekW (5875 kVA)
Maximum Rating4840 ekW (6050 kVA)
Frequency50 Hz or 60 Hz
Speed1000 rpm (50 hz) or 900 rpm (60 hz)
AspirationTurbocharged-Aftercooled
Bore280 mm11 in
Stroke300 mm11.8 in
Displacement296 l18062 in³
Governor TypeElectronic
Fuel SystemEUI
Compression Ratio 50 Hz13.1
Compression Ratio 60 Hz13:1
Engine ModelVee 16, 4-Stroke-Cycle Diesel
Emissions/Fuel StrategyEPA Tier 2, IMO II
Length9314 mm366.7 in
Width1990 mm78.3 in
Height4167 mm164.1 in
Weight31000 kg/ 68343 lb (engine dry weight), 18145 kg/ 40000 lb (generator weight)

C280-16 Standard Equipment

  • Air Inlet System
    • Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated
  • Control System
    • Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)
  • Cooling System
    • Engine coolant water drains
  • Exhaust System
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors
  • Lube Oil System
    • Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves
  • General
    • Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature

Exterior

Specifications

Minimum Rating4700 ekW (5875 kVA)
Maximum Rating4840 ekW (6050 kVA)
Frequency50 Hz or 60 Hz
Speed1000 rpm (50 hz) or 900 rpm (60 hz)
AspirationTurbocharged-Aftercooled
Bore280 mm11 in
Stroke300 mm11.8 in
Displacement296 l18062 in³
Governor TypeElectronic
Fuel SystemEUI
Compression Ratio 50 Hz13.1
Compression Ratio 60 Hz13:1
Engine ModelVee 16, 4-Stroke-Cycle Diesel
Emissions/Fuel StrategyEPA Tier 2, IMO II
Length9314 mm366.7 in
Width1990 mm78.3 in
Height4167 mm164.1 in
Weight31000 kg/ 68343 lb (engine dry weight), 18145 kg/ 40000 lb (generator weight)

Equipment

C280-16 Standard Equipment

  • Air Inlet System
    • Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated
  • Control System
    • Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)
  • Cooling System
    • Engine coolant water drains
  • Exhaust System
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors
  • Lube Oil System
    • Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves
  • General
    • Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature

360° Interactive

Exterior

Related Products

Loading