C280-8

Specifications

Minimum Rating2350 ekW (2938 kVA)
Maximum Rating2420 ekW (3025 kVA)
Frequency50 Hz or 60 Hz
Speed1000 rpm (50 hz) or 900 rpm (60 hz)
AspirationTurbocharged-Aftercooled
Bore280 mm11 in
Stroke300 mm11.8 in
Displacement148 l9031 in³
Governor TypeElectronic
Fuel SystemEUI
Compression Ratio 50 Hz13.1
Compression Ratio 60 Hz13:1
Engine ModelIn-line 8, 4-Stroke-Cycle Diesel
Emissions/Fuel StrategyEPA Tier 2, IMO II
Length8040 mm316.5 in
Width1961 mm77.2 in
Height3937 mm155 in
Weight - Estimated11340 kg25000 lb

C280-8 Standard Equipment

  • Air Inlet System
    • Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated
  • Control System
    • Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)
  • Cooling System
    • Engine coolant water drains
  • Exhaust System
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors
  • Lube Oil System
    • Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves
  • General
    • Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature

Specifications

Minimum Rating2350 ekW (2938 kVA)
Maximum Rating2420 ekW (3025 kVA)
Frequency50 Hz or 60 Hz
Speed1000 rpm (50 hz) or 900 rpm (60 hz)
AspirationTurbocharged-Aftercooled
Bore280 mm11 in
Stroke300 mm11.8 in
Displacement148 l9031 in³
Governor TypeElectronic
Fuel SystemEUI
Compression Ratio 50 Hz13.1
Compression Ratio 60 Hz13:1
Engine ModelIn-line 8, 4-Stroke-Cycle Diesel
Emissions/Fuel StrategyEPA Tier 2, IMO II
Length8040 mm316.5 in
Width1961 mm77.2 in
Height3937 mm155 in
Weight - Estimated11340 kg25000 lb

Equipment

C280-8 Standard Equipment

  • Air Inlet System
    • Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated
  • Control System
    • Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)
  • Cooling System
    • Engine coolant water drains
  • Exhaust System
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors
  • Lube Oil System
    • Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves
  • General
    • Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature

Related Products

Loading