C32 Tier 4 / IMO III

Specifications

Minimum Rating282 ekW
Maximum Rating940 ekW
Frequency60hz
Rated Engine Speed1800 rpm
ConfigurationVee-12, 4-stroke-Cycle-Diesel
AspirationTurbocharged-aftercooled aspiration
Bore145 mm5.71 in
Stroke162 mm6.38 in
Displacement32.1 l1959 in³
GovernorElectronic (A5 ECM)
EmissionsU.S. EPA Tier 4 Final certified / IMO III emissions certified (SCR required)
Length167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Engine Dry Weight15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
6 Brick U-Flow - Height597 mm23.5 in
6 Brick U-Flow - Length2159 mm85 in
6 Brick U-Flow - Weight560 kg1235 lb
6 Brick U-Flow - Width1445 mm56.9 in
6 Brick Z-Flow - Height597 mm23.5 in
6 Brick Z-Flow - Length3751 mm147.7 in
6 Brick Z-Flow - Weight565 kg1246 lb
6 Brick Z-Flow - Width1106 mm43.5 in
Dosing Cabinet - Height579 mm22.8 in
Dosing Cabinet - Length949 mm37.4 in
Dosing Cabinet - Weight95 kg209 lb
Dosing Cabinet - Width477 mm18.8 in
CoolingHeat exchanger, keel or radiator cooled
GeneratorSR5 - Form Wound
Oil Change Interval750 hrs
Refill CapacityLube Oil System w/ oil filter change: 146 L (38.5 gal)

C32 Tier 4 / IMO III Standard Equipment

  • AIR INLET SYSTEM
    • Separate circuit aftercooled (SCAC)
    • Closed crankcase fumes disposal
  • CONTROL SYSTEM
    • 24V control system
  • COOLING SYSTEM
    • Heat exchanger or Keel Cooling
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • FUEL SYSTEM
    • Duplex fuel filters with hybrid fuel lines
    • Primary fuel filter with water separator installed on base frame
  • GENERATORS AND GENERATOR ATTACHMENTS
    • IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
  • LUBE SYSTEM
    • Oil fill, simplex filter and dipstick
  • MOUNTING SYSTEM
    • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
  • GENERAL
    • Right or left hand service sides
    • Customer wiring and service tool connector

C32 Tier 4 / IMO III Optional Equipment

  • ALARM AND PROTECTION
    • MGCP III B control panel with Cat® Alarm and Protection System
    • IP44 generator protection
  • EXHAUST SYSTEM
    • Muffler
    • Water-in-fuel and exhaust temperature sensors
    • SOLAS approved spray shielding
  • CHARGING SYSTEM
    • Charging alternator
  • FUEL SYSTEM
    • Manual or electric fuel priming pump
    • Fuel cooler
  • LUBE SYSTEM
    • Duplex oil filters
  • STARTING SYSTEM
    • Starting motors – air, electric or redundant

Specifications

Minimum Rating282 ekW
Maximum Rating940 ekW
Frequency60hz
Rated Engine Speed1800 rpm
ConfigurationVee-12, 4-stroke-Cycle-Diesel
AspirationTurbocharged-aftercooled aspiration
Bore145 mm5.71 in
Stroke162 mm6.38 in
Displacement32.1 l1959 in³
GovernorElectronic (A5 ECM)
EmissionsU.S. EPA Tier 4 Final certified / IMO III emissions certified (SCR required)
Length167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Engine Dry Weight15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
6 Brick U-Flow - Height597 mm23.5 in
6 Brick U-Flow - Length2159 mm85 in
6 Brick U-Flow - Weight560 kg1235 lb
6 Brick U-Flow - Width1445 mm56.9 in
6 Brick Z-Flow - Height597 mm23.5 in
6 Brick Z-Flow - Length3751 mm147.7 in
6 Brick Z-Flow - Weight565 kg1246 lb
6 Brick Z-Flow - Width1106 mm43.5 in
Dosing Cabinet - Height579 mm22.8 in
Dosing Cabinet - Length949 mm37.4 in
Dosing Cabinet - Weight95 kg209 lb
Dosing Cabinet - Width477 mm18.8 in
CoolingHeat exchanger, keel or radiator cooled
GeneratorSR5 - Form Wound
Oil Change Interval750 hrs
Refill CapacityLube Oil System w/ oil filter change: 146 L (38.5 gal)

Equipment

C32 Tier 4 / IMO III Standard Equipment

  • AIR INLET SYSTEM
    • Separate circuit aftercooled (SCAC)
    • Closed crankcase fumes disposal
  • CONTROL SYSTEM
    • 24V control system
  • COOLING SYSTEM
    • Heat exchanger or Keel Cooling
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • FUEL SYSTEM
    • Duplex fuel filters with hybrid fuel lines
    • Primary fuel filter with water separator installed on base frame
  • GENERATORS AND GENERATOR ATTACHMENTS
    • IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
  • LUBE SYSTEM
    • Oil fill, simplex filter and dipstick
  • MOUNTING SYSTEM
    • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
  • GENERAL
    • Right or left hand service sides
    • Customer wiring and service tool connector

C32 Tier 4 / IMO III Optional Equipment

  • ALARM AND PROTECTION
    • MGCP III B control panel with Cat® Alarm and Protection System
    • IP44 generator protection
  • EXHAUST SYSTEM
    • Muffler
    • Water-in-fuel and exhaust temperature sensors
    • SOLAS approved spray shielding
  • CHARGING SYSTEM
    • Charging alternator
  • FUEL SYSTEM
    • Manual or electric fuel priming pump
    • Fuel cooler
  • LUBE SYSTEM
    • Duplex oil filters
  • STARTING SYSTEM
    • Starting motors – air, electric or redundant

Related Products

Loading