M 20 C

Specifications

Minimum Rating979 kWe (1224 kVA)
Maximum Rating1726 kWe (2160 kVA)
Configuration6,8,9 Cylinder
Bore200 mm7.87 in
Stroke300 mm11.81 in
Swept Volume9.4 l/cyl573.62 in³
Emissions/Fuel StrategyIMO II
Height2833 mm - 3010 mm (111.5 in - 118.5 in)
Length6073 mm - 7125 mm (239.1 in - 280.5 in)
Weight18.8 t - 30.0 t (41447 lbs - 66139 lbs)
Width1680 mm - 1816 mm ( 66.1 in - 71.5 in)

M 20 C Standard Equipment

  • Air Inlet System
    • Air intake silencer / filter
  • Control System
    • Load Sharing Unit (for multiple engine plant only)
    • Protection System
    • Serial Link Interface (MODbus RTU / canbus)
    • Speed governor
  • Cooling System
    • Charge air cooler
    • Electric cooling water preheater (fitted on base frame)
    • HT cooling water pump (engine driven)
    • LT cooling water pump (engine driven)
  • Exhaust System
    • Exhaust gas expansion joint
    • Exhaust gas insulated manifolds
    • Turbocharger at counter-flywheel side
  • Fuel System
    • Fuel circulating pump (attached / for MDO/MGO only)
    • Fuel indicator filter
    • Fuel pressure valve (separate / for MDO/MGO only)
  • Instrumentation
    • Control push buttons and lamps
    • Emergency stop lever
    • Local control panel
    • Pressure and temperature indicator
  • Lube System
    • Lube oil cooler
    • Lube oil pump (engine driven)
    • Lube oil self-cleaning filter
    • Oil sump in base frame
    • Pre-lubricating oil pump (electr. driven/fitted on base frame)
    • Pressure regulating valve
  • Mounting System
    • Flexible pipe connections
    • High flexible coupling
    • Resilient mounting
  • Starting System
    • Air starting motor
    • Manual barring device
  • General
    • Engine, flex. coupling and generator mounted on a common base frame
    • Flywheel cover
    • Lifting device (rental)
    • Torsional Vibration Calculation (TVC)

M 20 C Optional Equipment

  • Air Inlet System
    • Air inlet shut-off valve
    • Air intake transition piece
    • Expansion joint
    • Silencer / filter
  • Control System
    • Air injection control (for better load request)
    • Electronic speed governor
    • Engine alarm system
    • Remote indicators (start air pressure, engine speed, etc.)
    • Starter for electric driven pumps
    • 24 DC UPS
  • Cooling System
    • FW/SW plate cooler
    • HT cooling water pump (electric driven)
    • LT cooling water pump (electric driven)
    • Sea water cooling pump (electric driven)
    • Temperature control valve
  • Exhaust System
    • Silencer (with or without spark arrester)
  • Fuel System
    • Fuel oil cooler
    • HFO final preheater
    • HFO pressure regulating valve
    • HFO self-cleaning automatic filter
    • HFO supply and booster pumps (electrical driven)
    • HFO treatment and supply modules
    • HFO viscosity control device
    • Mixing tank
  • Lube System
    • Lube oil centrifuge
    • Lube oil pump (electrical driven)
    • Lube oil treatment and combined modules
  • Mounting System
    • Double resilient mounting
  • Starting System
    • Starting air compressor
    • Starting air receiver
  • General
    • Engine PTO coupling
    • Generator customer supply
    • PTO shaft on counter-flywheel side

Specifications

Minimum Rating979 kWe (1224 kVA)
Maximum Rating1726 kWe (2160 kVA)
Configuration6,8,9 Cylinder
Bore200 mm7.87 in
Stroke300 mm11.81 in
Swept Volume9.4 l/cyl573.62 in³
Emissions/Fuel StrategyIMO II
Height2833 mm - 3010 mm (111.5 in - 118.5 in)
Length6073 mm - 7125 mm (239.1 in - 280.5 in)
Weight18.8 t - 30.0 t (41447 lbs - 66139 lbs)
Width1680 mm - 1816 mm ( 66.1 in - 71.5 in)

Equipment

M 20 C Standard Equipment

  • Air Inlet System
    • Air intake silencer / filter
  • Control System
    • Load Sharing Unit (for multiple engine plant only)
    • Protection System
    • Serial Link Interface (MODbus RTU / canbus)
    • Speed governor
  • Cooling System
    • Charge air cooler
    • Electric cooling water preheater (fitted on base frame)
    • HT cooling water pump (engine driven)
    • LT cooling water pump (engine driven)
  • Exhaust System
    • Exhaust gas expansion joint
    • Exhaust gas insulated manifolds
    • Turbocharger at counter-flywheel side
  • Fuel System
    • Fuel circulating pump (attached / for MDO/MGO only)
    • Fuel indicator filter
    • Fuel pressure valve (separate / for MDO/MGO only)
  • Instrumentation
    • Control push buttons and lamps
    • Emergency stop lever
    • Local control panel
    • Pressure and temperature indicator
  • Lube System
    • Lube oil cooler
    • Lube oil pump (engine driven)
    • Lube oil self-cleaning filter
    • Oil sump in base frame
    • Pre-lubricating oil pump (electr. driven/fitted on base frame)
    • Pressure regulating valve
  • Mounting System
    • Flexible pipe connections
    • High flexible coupling
    • Resilient mounting
  • Starting System
    • Air starting motor
    • Manual barring device
  • General
    • Engine, flex. coupling and generator mounted on a common base frame
    • Flywheel cover
    • Lifting device (rental)
    • Torsional Vibration Calculation (TVC)

M 20 C Optional Equipment

  • Air Inlet System
    • Air inlet shut-off valve
    • Air intake transition piece
    • Expansion joint
    • Silencer / filter
  • Control System
    • Air injection control (for better load request)
    • Electronic speed governor
    • Engine alarm system
    • Remote indicators (start air pressure, engine speed, etc.)
    • Starter for electric driven pumps
    • 24 DC UPS
  • Cooling System
    • FW/SW plate cooler
    • HT cooling water pump (electric driven)
    • LT cooling water pump (electric driven)
    • Sea water cooling pump (electric driven)
    • Temperature control valve
  • Exhaust System
    • Silencer (with or without spark arrester)
  • Fuel System
    • Fuel oil cooler
    • HFO final preheater
    • HFO pressure regulating valve
    • HFO self-cleaning automatic filter
    • HFO supply and booster pumps (electrical driven)
    • HFO treatment and supply modules
    • HFO viscosity control device
    • Mixing tank
  • Lube System
    • Lube oil centrifuge
    • Lube oil pump (electrical driven)
    • Lube oil treatment and combined modules
  • Mounting System
    • Double resilient mounting
  • Starting System
    • Starting air compressor
    • Starting air receiver
  • General
    • Engine PTO coupling
    • Generator customer supply
    • PTO shaft on counter-flywheel side

Related Products

Loading