Specifications

3508

Specifications

Minimum Rating 709 bkW950 BHP
Maximum Rating 795 bkW1065 BHP
Emissions Non-certified
Bore 170 mm6.7 in
Stroke 190 mm7.5 in
Displacement 34.5 l2105 in³
Aspiration Turbocharged Aftercooled
Engine Weight - Net Dry 5355 kg11806 lb
Rotation from Flywheel End Counterclockwise
Flywheel and Flywheel Housing SAE No. 0
Flywheel Teeth 151
Lube Oil System - Refill 114 l30 gal (US)
Cooling System - Engine 227 l60 gal (US)
Length 2350 mm92.5 in
Width 1744 mm68.7 in
Height 1902 mm74.9 in

3508 Standard Equipment

  • Air Inlet System
    • Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
    • Turbocharger, rear mounted
    • Jacket water aftercooled
  • Control System
    • Charging alternator 24 volt, 35 amp
    • Governor, RH, 3161 with self contained synthetic oil sump
    • Air-fuel ratio control
    • Mechanical speed control, without torque control
    • Governor control
    • Positive locking
  • Cooling System
    • Thermostats and housing
    • Jacket water pump, centrifugal
  • Exhaust System
    • Exhaust manifold, dry
  • Flywheels and Flywheel Housing
    • SAE No. 0 flywheel
    • 151 flywheel teeth
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Fuel filter, with service indicators, cartridge type with RH service
    • Fuel transfer pump
  • Instrumentation
    • Instrument Panel, RH
    • Engine oil pressure gauge
    • Fuel pressure gauge
    • Oil filter differential gauge
    • Jacket water temperature gauge
    • Service meter, electric
    • Tachometer
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filler
    • Oil dipstick
    • Oil pump
    • Oil filter, cartridge type with RH service
    • Shallow oil pan
    • Fumes disposal (not installed)
  • Mounting System
    • Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
    • Included on selected top level engines
  • Power Take Off
    • Accessory drive, upper RH
    • Front housing, single sided
  • Protection System
    • Junction box
    • Manual shutoff, RH
    • Safety shutoff protection, energized to shutdown
    • Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
    • Water temperature
    • Overspeed
    • 3161 governor solenoid energized to shutdown
  • Starting System
    • Starting switch
  • General
    • Vibration damper
    • Lifting eyes
    • Paint: Caterpillar yellow, with optional colors available at request

3508 Optional Equipment

  • Cooling System
    • Emergency water connections
  • Exhaust System
    • Flexible fitting
    • Exhaust elbow
    • Exhaust flange
  • Fuel System
    • Primary fuel filter - cartridge type
  • Lubrication System
    • Oil level regulator
  • Power Take-off
    • Two-sided front housing
    • Front, upper left-hand accessory drive
    • Front, lower left-hand accessory drive
    • Auxiliary drive shaft
    • Auxiliary drive pulley
  • Starting System
    • Battery - 24V
    • Battery rack

Specifications

Minimum Rating 709 bkW950 BHP
Maximum Rating 795 bkW1065 BHP
Emissions Non-certified
Bore 170 mm6.7 in
Stroke 190 mm7.5 in
Displacement 34.5 l2105 in³
Aspiration Turbocharged Aftercooled
Engine Weight - Net Dry 5355 kg11806 lb
Rotation from Flywheel End Counterclockwise
Flywheel and Flywheel Housing SAE No. 0
Flywheel Teeth 151
Lube Oil System - Refill 114 l30 gal (US)
Cooling System - Engine 227 l60 gal (US)
Length 2350 mm92.5 in
Width 1744 mm68.7 in
Height 1902 mm74.9 in

Equipment

3508 Standard Equipment

  • Air Inlet System
    • Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
    • Turbocharger, rear mounted
    • Jacket water aftercooled
  • Control System
    • Charging alternator 24 volt, 35 amp
    • Governor, RH, 3161 with self contained synthetic oil sump
    • Air-fuel ratio control
    • Mechanical speed control, without torque control
    • Governor control
    • Positive locking
  • Cooling System
    • Thermostats and housing
    • Jacket water pump, centrifugal
  • Exhaust System
    • Exhaust manifold, dry
  • Flywheels and Flywheel Housing
    • SAE No. 0 flywheel
    • 151 flywheel teeth
    • SAE No. 0 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Fuel filter, with service indicators, cartridge type with RH service
    • Fuel transfer pump
  • Instrumentation
    • Instrument Panel, RH
    • Engine oil pressure gauge
    • Fuel pressure gauge
    • Oil filter differential gauge
    • Jacket water temperature gauge
    • Service meter, electric
    • Tachometer
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filler
    • Oil dipstick
    • Oil pump
    • Oil filter, cartridge type with RH service
    • Shallow oil pan
    • Fumes disposal (not installed)
  • Mounting System
    • Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
    • Included on selected top level engines
  • Power Take Off
    • Accessory drive, upper RH
    • Front housing, single sided
  • Protection System
    • Junction box
    • Manual shutoff, RH
    • Safety shutoff protection, energized to shutdown
    • Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
    • Water temperature
    • Overspeed
    • 3161 governor solenoid energized to shutdown
  • Starting System
    • Starting switch
  • General
    • Vibration damper
    • Lifting eyes
    • Paint: Caterpillar yellow, with optional colors available at request

3508 Optional Equipment

  • Cooling System
    • Emergency water connections
  • Exhaust System
    • Flexible fitting
    • Exhaust elbow
    • Exhaust flange
  • Fuel System
    • Primary fuel filter - cartridge type
  • Lubrication System
    • Oil level regulator
  • Power Take-off
    • Two-sided front housing
    • Front, upper left-hand accessory drive
    • Front, lower left-hand accessory drive
    • Auxiliary drive shaft
    • Auxiliary drive pulley
  • Starting System
    • Battery - 24V
    • Battery rack

Related Products

Model.GetDictionaryValue(