Specifications

G3606 A4
Minimum Rating 1398 bkW1875 BHP
Maximum Rating 1499 bkW2010 BHP
Emissions NSPS Site Compliant Capable
Displacement 127.2 l7762 in³
Compression Ratio 9.2:1
Aspiration Turbocharged-Aftercooled
Rotation from Flywheel End Counterclockwise
Flywheel Teeth 255
Weight - Dry 16730 kg36883 lb
Oil Change Interval 5000 hours
Ignition, Protection Electronic (ADEM™ A4)
Stroke 300 mm11.8 in
Bore 300 mm11.8 in
Cooling System 470 l124 gal (US)
Lube Oil System - Refill 708 l187 gal (US)

G3606 A4 Standard Equipment

  • Air Inlet System
    • Air cleaner — standard-duty inlet air adapter
  • Control System
    • A4 control system — provides electronic governing integrated with air/fuel ratio control and individual cylinder ignition timing control
    • Electrical system and instrumentation certified for Class I, Division 2, Group D hazardous location. Includes entire ADEM A4 system and optional control panel.
  • Cooling System
    • Jacket water pump
    • Jacket water thermostats and housing
    • Aftercooler/oil cooler pump
    • Aftercooler/oil cooler thermostats and housing
    • Two-stage aftercooler
    • Jacket water heater connections
    • Standard ANSI connections
  • Exhaust System
    • Dry exhaust manifolds
    • Single vertical outlet adapter
    • Stainless steel encapsulated insulation
  • Flywheels and Flywheel Housing
    • SAE standard rotation
  • Fuel System
    • Gas admission valves -- electronically controlled fuel supply pressure
  • Ignition System
    • A4 control system — senses individual cylinder detonation and controls individual cylinder timing
  • Lube System
    • Crankcase breathers (top mounted)
    • Oil cooler
    • Oil filter
    • Oil pan drain valves -- front and rear
  • Mounting System
    • Engine mounting feet (six total)
  • Protection
    • Electronic shutoff system with purge cycle
    • Crankcase explosion relief valves
    • Gas shutoff valve
  • Starting System
    • Air starting system
  • General
    • Paint — Cat yellow
    • Vibration dampers

G3606 A4 Optional Equipment

  • Air Inlet System
    • Heavy-duty air cleaner with precleaners
  • Charging System
    • 35 Amp & 65 Amp charging alternators – CSA approved
  • Exhaust System
    • Flexible bellows adapters
    • Exhaust expander
    • Weld flanges
  • Fuel System
    • Fuel filter
    • Gas pressure regulator
    • Flexible connection
  • Instrumentation
    • LCD display panel
    • Remote data monitoring and speed control
    • Color HMI display
    • Compatible with Cat® Electronic Technician (ET) and Data View
    • Modbus and Ethernet capable
  • Lube System
    • Air or electric motor-driven prelube
    • Duplex oil filter
    • RH Service
    • Lube oil makeup system
  • Mounting System
    • Mounting plates (set of four)
    • Extra mounting feet (set of two)
    • Extra mounting plates (set of two)
  • Power Take-Offs
    • Front stub shafts
  • Starting System
    • Air pressure reducing valve
  • General
    • Engine barring device
    • Damper guard

Exterior

Specifications

Minimum Rating 1398 bkW1875 BHP
Maximum Rating 1499 bkW2010 BHP
Emissions NSPS Site Compliant Capable
Displacement 127.2 l7762 in³
Compression Ratio 9.2:1
Aspiration Turbocharged-Aftercooled
Rotation from Flywheel End Counterclockwise
Flywheel Teeth 255
Weight - Dry 16730 kg36883 lb
Oil Change Interval 5000 hours
Ignition, Protection Electronic (ADEM™ A4)
Stroke 300 mm11.8 in
Bore 300 mm11.8 in
Cooling System 470 l124 gal (US)
Lube Oil System - Refill 708 l187 gal (US)

Equipment

G3606 A4 Standard Equipment

  • Air Inlet System
    • Air cleaner — standard-duty inlet air adapter
  • Control System
    • A4 control system — provides electronic governing integrated with air/fuel ratio control and individual cylinder ignition timing control
    • Electrical system and instrumentation certified for Class I, Division 2, Group D hazardous location. Includes entire ADEM A4 system and optional control panel.
  • Cooling System
    • Jacket water pump
    • Jacket water thermostats and housing
    • Aftercooler/oil cooler pump
    • Aftercooler/oil cooler thermostats and housing
    • Two-stage aftercooler
    • Jacket water heater connections
    • Standard ANSI connections
  • Exhaust System
    • Dry exhaust manifolds
    • Single vertical outlet adapter
    • Stainless steel encapsulated insulation
  • Flywheels and Flywheel Housing
    • SAE standard rotation
  • Fuel System
    • Gas admission valves -- electronically controlled fuel supply pressure
  • Ignition System
    • A4 control system — senses individual cylinder detonation and controls individual cylinder timing
  • Lube System
    • Crankcase breathers (top mounted)
    • Oil cooler
    • Oil filter
    • Oil pan drain valves -- front and rear
  • Mounting System
    • Engine mounting feet (six total)
  • Protection
    • Electronic shutoff system with purge cycle
    • Crankcase explosion relief valves
    • Gas shutoff valve
  • Starting System
    • Air starting system
  • General
    • Paint — Cat yellow
    • Vibration dampers

G3606 A4 Optional Equipment

  • Air Inlet System
    • Heavy-duty air cleaner with precleaners
  • Charging System
    • 35 Amp & 65 Amp charging alternators – CSA approved
  • Exhaust System
    • Flexible bellows adapters
    • Exhaust expander
    • Weld flanges
  • Fuel System
    • Fuel filter
    • Gas pressure regulator
    • Flexible connection
  • Instrumentation
    • LCD display panel
    • Remote data monitoring and speed control
    • Color HMI display
    • Compatible with Cat® Electronic Technician (ET) and Data View
    • Modbus and Ethernet capable
  • Lube System
    • Air or electric motor-driven prelube
    • Duplex oil filter
    • RH Service
    • Lube oil makeup system
  • Mounting System
    • Mounting plates (set of four)
    • Extra mounting feet (set of two)
    • Extra mounting plates (set of two)
  • Power Take-Offs
    • Front stub shafts
  • Starting System
    • Air pressure reducing valve
  • General
    • Engine barring device
    • Damper guard

360° Interactive

Exterior

Related Products

Model.GetDictionaryValue(