3516C (HD) CI/D2 Hazardous Location Standard Equipment

• AIR INLET SYSTEM
  • Aftercooler core, corrosion resistant (air side)
  • Air cleaner, regular duty with service indicators
  • Dual turbochargers, rear mounted

• CONTROL SYSTEM
  • Dual Caterpillar A4 electronic engine control with electronic unit injector fuel system and rigid wiring harness.
  • 24 VDC (less than 10A) to be provided by customer at Power Distribution Panel to power engine electrical system.

• COOLING SYSTEM
  • Jacket water (JW) engine cooling and two-stage jacket water/separate circuit (SCAC) charge air cooling
  • To ensure compliance in use, radiators or heat exchangers must be capable of rejecting sufficient heat to allow proper engine operation at worst site conditions.
  • The radiator or heat exchanger must supply 48C (118 F)
  • SCAC cooling water to the aftercooler inlet of at least 200 gal/min at ambient temperature of 30C and at site conditions (including altitude considerations)

• EXHAUST SYSTEM
  • Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with water-cooled bearings and heat shields.
  • Exhaust outlet: 305 mm (12 in) round flanged outlet, vertical orientation

• FLYWHEELS & FLYWHEEL HOUSINGS
  • Flywheel, SAE No. 00, 183 teeth Flywheel housing, SAE No. 00
  • Flywheel housing, SAE No. 00
  • SAE standard rotation

• FUEL SYSTEM
  • Duplex Fuel filter, LH service. Simplex fuel filter, RH service
  • Fuel transfer pump
  • Fuel priming pump, RH
  • Electronically Controlled Unit Injectors
  • Customer connection located at lower right front of engine
  • SOLAS shielding

• INSTRUMENTATION
  • Engine mounted instrument panel with four position switch, over speed shutdown notification light, emergency stop notification light, graphical display unit for analog or digital display of: oil and fuel pressure, oil and fuel filter differential, system DC voltage, exhaust and water temperature, air inlet restriction, service meter, engine speed, fuel consumption (total and instantaneous)

• LUBE SYSTEM
  • Top mounted crankcase breather, RH oil filter, RH oil filler, gear type oil pump, deep sump oil pan, recommended use of Caterpillar Diesel Engine Oil 10W30 or 15W40

• MOUNTING SYSTEM
  • Mounting rails and isolation system based on customer request

• ELECTRICAL SYSTEM
  • MCS certified Class I / Divison 2
  • Low Smoke Zero Halogen Wiring Harness

• PROTECTION SYSTEM
  • A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
  • Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection for oil pressure and water temperature, over speed protection

• HAZARDOUS LOCATION
  • Only electrical system is hazardous environment certified
  • NEC 500 Class I Division 2 for gas groups C and D
  • Temperature class is T3 for ambient temperatures from -10 C to 50 C
  • Class I/ Division 2 CMPD

• GENERATOR AND GENERATOR ATTACHMENTS
  • Class I / Division 2 designed to customer's specifications
  • Insulation for harsh environment protection