Specifications

3516C (50 Hz)

Specifications

Minimum Rating 2500 kVA
Maximum Rating 2750 kVA
Voltage 380 to 11000 volts
Frequency 50 Hz
Speed 1500 rpm
Emissions/Fuel Strategy Low Fuel Consumption, Low Emissions
Engine Model 3516C, ATAAC, V-16,4-Stroke Water-Cooled Diesel
Compression Ratio 14.7:1
Aspiration TA
Governor Type Adem™3
Fuel System Electronic unit injection
Bore 170 mm6.69 in
Stroke - HD 215 mm8.46 in
Stroke - Standard 190 mm7.48 in

3516C (50 Hz) Standard Equipment

  • Air Inlet
    • Air Cleaner
  • Cooling
    • Package mounted radiator
  • Exhaust
    • Exhaust flange outlet
  • Fuel
    • Primary fuel filter with integral water separator
    • Secondary fuel filter
    • Fuel priming pump
  • Generator
    • Matched to the performance and output characteristics of Cat engines
    • IP23 Protection
  • Power Termination
    • Bus Bar
  • Control Panel
    • EMCP 4 Genset Controller
  • General
    • Paint - Caterpillar Yellow except rails and radiators gloss black

3516C (50 Hz) Optional Equipment

  • Exhaust
    • Exhaust mufflers
  • Generator
    • Anti-condensation heater
    • Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
    • Oversize and premium generators
  • Power Termination
    • Circuit breakers, UL listed
    • Circuit breakers, IEC compliant
  • Control Panels
    • EMCP (4.2) (4.3) (4.4)
    • Generator temperature monitoring & protection
    • Load share module
    • Digital I/O module
    • Remote monitoring software
  • Mounting
    • Rubber anti-vibration mounts
    • Spring-type vibration isolator
    • IBC isolators
  • Starting/Charging
    • Battery chargers
    • Oversize batteries
    • Jacket water heater
    • Heavy-duty starting system
    • Charging alternator
    • Air starting motor with control and silencer
  • General
    • The following options are based on regional and product configuration:
    • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
    • UL 2200 package
    • EU Certificate of Conformance (CE)
    • CSA Certification
    • EEC Declaration of Conformity
    • Enclosures: sound attenuated, weather protective
    • Automatic transfer switches (ATS)
    • Integral & sub-base fuel tanks
    • Integral & sub-base UL listed dual wall fuel tanks

Exterior

Specifications

Minimum Rating 2500 kVA
Maximum Rating 2750 kVA
Voltage 380 to 11000 volts
Frequency 50 Hz
Speed 1500 rpm
Emissions/Fuel Strategy Low Fuel Consumption, Low Emissions
Engine Model 3516C, ATAAC, V-16,4-Stroke Water-Cooled Diesel
Compression Ratio 14.7:1
Aspiration TA
Governor Type Adem™3
Fuel System Electronic unit injection
Bore 170 mm6.69 in
Stroke - HD 215 mm8.46 in
Stroke - Standard 190 mm7.48 in

Equipment

3516C (50 Hz) Standard Equipment

  • Air Inlet
    • Air Cleaner
  • Cooling
    • Package mounted radiator
  • Exhaust
    • Exhaust flange outlet
  • Fuel
    • Primary fuel filter with integral water separator
    • Secondary fuel filter
    • Fuel priming pump
  • Generator
    • Matched to the performance and output characteristics of Cat engines
    • IP23 Protection
  • Power Termination
    • Bus Bar
  • Control Panel
    • EMCP 4 Genset Controller
  • General
    • Paint - Caterpillar Yellow except rails and radiators gloss black

3516C (50 Hz) Optional Equipment

  • Exhaust
    • Exhaust mufflers
  • Generator
    • Anti-condensation heater
    • Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
    • Oversize and premium generators
  • Power Termination
    • Circuit breakers, UL listed
    • Circuit breakers, IEC compliant
  • Control Panels
    • EMCP (4.2) (4.3) (4.4)
    • Generator temperature monitoring & protection
    • Load share module
    • Digital I/O module
    • Remote monitoring software
  • Mounting
    • Rubber anti-vibration mounts
    • Spring-type vibration isolator
    • IBC isolators
  • Starting/Charging
    • Battery chargers
    • Oversize batteries
    • Jacket water heater
    • Heavy-duty starting system
    • Charging alternator
    • Air starting motor with control and silencer
  • General
    • The following options are based on regional and product configuration:
    • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
    • UL 2200 package
    • EU Certificate of Conformance (CE)
    • CSA Certification
    • EEC Declaration of Conformity
    • Enclosures: sound attenuated, weather protective
    • Automatic transfer switches (ATS)
    • Integral & sub-base fuel tanks
    • Integral & sub-base UL listed dual wall fuel tanks

360° Interactive

Exterior

Related Products

Model.GetDictionaryValue(