Specifications

3616 (50 Hz)

Specifications

Minimum Rating	4700 kVA
Maximum Rating	7520 kVA
Frequency	50 Hz
Speed	720 & 1000 rpm
Emissions/Fuel Strategy	Low Fuel Consumption
Engine Model	3616 V-16,4-Stroke Water-Cooled Diesel
Compression Ratio	13:1
Aspiration	TA
Governor Type	Generator Set Monitoring System (GMS)
Fuel System	Direct unit injection
Bore	280 mm11 in
Displacement	18.5 l1127 in³
Stroke	300 mm11.8 in
Total Displacement	296 l18032 in³

3616 (50 Hz) Standard Equipment

Air Inlet System
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Air inlet shutoff
- Air cleaner
- Breather, crankcase, top-mounted
- Turbocharger, watercooled, engine oil lubricated

Cooling System
- Engine coolant water drains
- Front mounted turbos
- Three-bundle oil cooler
- Water temperature regulator
- Jacket water thermostats

Exhaust System
- 457 mm (18 in) Cat bolt pattern
- Dry, gas tight, exhaust manifold
- Includes adapter, flexible exhaust fitting

Fuel System
- Simplex or duplex

Generator System
- Custom generator per generator data sheet completed by Dealer

Governor System
- UG actuator

Lube System
- Centrifugal oil filters with single shutoff
- Service side engine mounted on cylinder block inspection covers
- Wet oil sump. Includes engine-driven main lubrication & oil pumps, oil lines and oil pan
- Oil filler and dipstick
- Oil pressure regulating valve
- Crankcase explosion relief valves

Mounting System
- Damper, torsional vibration
- Engine and generator mounting

Starting / Charging System
- Vane type air starter
- Two motors, engine mounted at rear, on left side
- Air silencer
- Line group for single point custom connection

General:
- Paint, Caterpillar yellow
- Gear driven pumps: Fuel / Oil / Jacket water / Aftercooler / Oil cooler water

3616 (50 Hz) Optional Equipment

Air Inlet System
- Soot filter
- Air cleaner louver assembly
- Vertical support bracket
- Heavy duty air cleaner
- Air inlet adapter
- Boost control valve

Cooling System
- Heat exchanger for single circuit
- Heating aids
- Cooling system aids
- Auxiliary water pump
- Expansion tank

Exhaust System
- Flexible exhaust fittings
- Weld flange and related hardware

Fuel System
- Fuel priming pump
- Duplex primary fuel strainer
- Fuel system connections

Generator System
- 3 Phase, six Leads, WYE
- Class F insulation
- Busbar connections
- Winding temperature detectors
- Anti-condensation space heaters

Governor System
- Electronic / actuators
- Digital programmers
- Battery backup / Power supply
- 230 UA
- 723 Plus
- EGB actuator

Lube System
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)

Mounting System
- Isolator
- Spring type vibration isolator
- Vertically restrained
- Non-vertically restrained

Starting / Charging System
- Pressure reducing valve
- Compressed air flex hose
- Turbine type air starters
- Redundant air starters

General:
- Custom paint colors

Specifications

Minimum Rating	4700 kVA
Maximum Rating	7520 kVA
Frequency	50 Hz
Speed	720 & 1000 rpm
Emissions/Fuel Strategy	Low Fuel Consumption
Engine Model	3616 V-16,4-Stroke Water-Cooled Diesel
Compression Ratio	13:1
Aspiration	TA
Governor Type	Generator Set Monitoring System (GMS)
Fuel System	Direct unit injection
Bore	280 mm11 in
Displacement	18.5 l1127 in³
Stroke	300 mm11.8 in
Total Displacement	296 l18032 in³

Equipment

3616 (50 Hz) Standard Equipment

Air Inlet System
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Air inlet shutoff
- Air cleaner
- Breather, crankcase, top-mounted
- Turbocharger, watercooled, engine oil lubricated

Cooling System
- Engine coolant water drains
- Front mounted turbos
- Three-bundle oil cooler
- Water temperature regulator
- Jacket water thermostats

Exhaust System
- 457 mm (18 in) Cat bolt pattern
- Dry, gas tight, exhaust manifold
- Includes adapter, flexible exhaust fitting

Fuel System
- Simplex or duplex

Generator System
- Custom generator per generator data sheet completed by Dealer

Governor System
- UG actuator

Lube System
- Centrifugal oil filters with single shutoff
- Service side engine mounted on cylinder block inspection covers
- Wet oil sump. Includes engine-driven main lubrication & oil pumps, oil lines and oil pan
- Oil filler and dipstick
- Oil pressure regulating valve
- Crankcase explosion relief valves

Mounting System
- Damper, torsional vibration
- Engine and generator mounting

Starting / Charging System
- Vane type air starter
- Two motors, engine mounted at rear, on left side
- Air silencer
- Line group for single point custom connection

General:
- Paint, Caterpillar yellow
- Gear driven pumps: Fuel / Oil / Jacket water / Aftercooler / Oil cooler water

3616 (50 Hz) Optional Equipment

Air Inlet System
- Soot filter
- Air cleaner louver assembly
- Vertical support bracket
- Heavy duty air cleaner
- Air inlet adapter
- Boost control valve

Cooling System
- Heat exchanger for single circuit
- Heating aids
- Cooling system aids
- Auxiliary water pump
- Expansion tank

Exhaust System
- Flexible exhaust fittings
- Weld flange and related hardware

Fuel System
- Fuel priming pump
- Duplex primary fuel strainer
- Fuel system connections

Generator System
- 3 Phase, six Leads, WYE
- Class F insulation
- Busbar connections
- Winding temperature detectors
- Anti-condensation space heaters

Governor System
- Electronic / actuators
- Digital programmers
- Battery backup / Power supply
- 230 UA
- 723 Plus
- EGB actuator

Lube System
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)

Mounting System
- Isolator
- Spring type vibration isolator
- Vertically restrained
- Non-vertically restrained

Starting / Charging System
- Pressure reducing valve
- Compressed air flex hose
- Turbine type air starters
- Redundant air starters

General:
- Custom paint colors

Related Products

footer-border