Engine Model | Cat C3.3B DIT (turbo) |
Net Power | 53.6 kW71.8 HP |
Gross Power - SAE J1995 | 55.4 kW74.3 HP |
Net Power - SAE 1349 | 53.6 kW71.8 HP |
Displacement | 3.3 l203 in³ |
Bore | 94 mm3.7 in |
Stroke | 120 mm4.7 in |
Net Power SAE 1349† | 54 kW72.4 HP |
Operating Weight | 4778 kg10533 lb |
Rated Operating Capacities - 50% Tipping Load | 1724 kg3800 lb |
Breakout Force - Tilt Cylinder | 3307 kg7291 lb |
Ground Contact Area - With 400 mm/15.7 in Track | 1.3 m²2015 in² |
Ground Contact Area - With 450 mm/17.7 in Track | 1.47 m²2272 in² |
Rated Operating Capacities - 35% Tipping Load | 1207 kg2660 lb |
Rated Operating Capacity with Optional Counterweight | 1837 kg4050 lb |
Tipping Load | 3447 kg7600 lb |
Bucket Pin Height - Carry Position | 190 mm7.5 in |
Bucket Pin Height - Maximum Lift | 3178 mm125.1 in |
Clearance at Maximum Lift and Dump | 2387 mm94 in |
Departure Angle | 33° |
Ground Clearance | 226 mm8.9 in |
Height - Top of Cab | 2113 mm83.2 in |
Length - Track on Ground | 1630 mm64.2 in |
Length - With Bucket on Ground | 3714 mm146.2 in |
Length - Without Bucket | 2995 mm117.9 in |
Maximum Dump Angle | 51° |
Maximum Overall Height | 4015 mm158.1 in |
Maximum Reach - With Arms Parallel to Ground | 1270 mm50 in |
Overall Length - Track | 2129 mm83.8 in |
Rack Back Angle - Maximum Height | 84° |
Reach - Maximum Lift/Dump | 761 mm30 in |
Turning Radius from Center - Bucket | 2256 mm88.8 in |
Turning Radius from Center - Coupler | 1410 mm55.5 in |
Turning Radius from Center - Machine Rear | 1796 mm70.7 in |
Vehicle Width (400 mm/15.7 in tracks) | 1931 mm76 in |
Vehicle Width (450 mm/17.7 in tracks) | 1981 mm78 in |
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 57 kW76 HP |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 121 l/min32 gal/min |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 28000 kPa4061 psi |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 33 kW44 HP |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 86 l/min23 gal/min |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 23000 kPa3335 psi |
ROPS | ISO 3471:2008 |
FOPS | ISO 3449:2005 Level I |
FOPS Level II | ISO 3449:2005 Level II |
Travel Speed - Forward or Reverse - One Speed | 7.2 km/h4.5 mile/h |
Travel Speed - Forward or Reverse - Two Speed | 11.3 km/h7 mile/h |
Cooling System | 14 l3.7 gal (US) |
Engine Crankcase | 11 l3 gal (US) |
Fuel Tank | 94 l24.8 gal (US) |
Hydraulic System | 52 l13.7 gal (US) |
Hydraulic Tank | 39 l10.3 gal (US) |
Bucket Pin Reach - Maximum Lift | 369 mm14.5 in |
Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Net Power - ISO 9249 | 54.1 kW72.6 HP |
Net Power ISO 9249† | 54.6 kW73.2 HP |
Note | †Tier 4 Interim equivalent engine offered only for Australia/New Zealand, Macedonia, Ukraine and South Korea. |
Peak Torque - 1,600 rpm - SAE J1995 | 265 N·m195 ft·lbf |
Inside Cab** | 81 dB(A)81 dB(A) |
Note (1) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
Note (2) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Outside Cab*** | 103 dB(A)103 dB(A) |
Ground Pressure - With 400 mm/15.7 in Track | 36.1 kPa5.2 psi |
Ground Pressure - With 450 mm/17.7 in Track | 32 kPa4.6 psi |
Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Rated Operating Capacities - 50% Tipping Load | 1724 kg3800 lb |
Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |