Base Power (1st Gear) - Net | 178 kW238 HP |
Engine Model | Cat C13 ACERT VHP |
Bore | 130 mm5.1 in |
Stroke | 157 mm6.2 in |
Speed at Rated Power | 1,850 rpm |
Emissions | Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent |
Maximum Altitude - Full Power | 4237 m13900 ft |
Maximum Altitude - Full Power (Tier 2) | 3672 m12049 ft |
Maximum Altitude - Full Power (Tier 3) | 4374 m14349 ft |
Maximum Torque - VHP Plus | 1542 N·m1137 lb/ft |
Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Note (2) | Optimized VHP Plus is standard for the 14M3. |
Note (3) | Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Note (4) | Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp) |
Standard - Fan Speed - Minimum | 550 rpm |
Standard Capability | 50 °C122 °F |
Torque Rise | 41% |
Displacement | 12.5 l763 in³ |
Number of Cylinders | 6 |
Circle - Outer Diameter | 1822 mm71.7 in |
Front Axle - Total Oscillation per Side | 32° |
Front Axle - Wheel Lean - Left/Right | 17.1° |
Blade Width | 4.2 m14 ft |
Arc Radius | 413 mm16.3 in |
Throat Clearance | 117 mm4.6 in |
Blade Height - With Cutting Edge | 631 mm24.9 in |
Blade Height - Without Cutting Edge | 585 mm23 in |
Blade Width - With End Bits | 4290 mm169 in |
Blade Width - Without End Bits | 4166 mm164 in |
Maximum Depth of Cut | 593 mm23.3 in |
Blade Tip Range - Backward | 5° |
Blade Tip Range - Forward | 40° |
Circle Centershift - Left | 650 mm25.6 in |
Circle Centershift - Right | 520 mm20.5 in |
Maximum Lift Above Ground | 419 mm16.5 in |
Maximum Shoulder Reach Outside of Tires - Left | 1870 mm73.6 in |
Maximum Shoulder Reach Outside of Tires - Right | 2004 mm78.9 in |
Moldboard Sideshift - Left | 740 mm29.1 in |
Moldboard Sideshift - Right | 790 mm31.1 in |
Operating Weight - Typically Equipped | 25968 kg57250 lb |
Gross Vehicle Weight - Base* - Front Axle | 6344 kg13994 lb |
Gross Vehicle Weight - Base* - Rear Axle | 16780 kg36994 lb |
Gross Vehicle Weight - Base* - Total | 23124 kg50980 lb |
Gross Vehicle Weight - Typically Equipped - Front Axle | 6915 kg15245 lb |
Gross Vehicle Weight - Typically Equipped - Rear Axle | 19053 kg42005 lb |
Gross Vehicle Weight - Typically Equipped - Total | 25968 kg57250 lb |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). |
Note (5) | Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
Standard - Fan Speed - Maximum | 1,600 rpm |
Note | *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. |