Specifications
Specifications
| Gross Input Power | 895 bkW1200 BHP |
| Gross Peak Input Torque | 5995 N·m4422 ft-lb |
| Rated Input Speed | 2100 r/min2100 r/min |
| Maximum Turbine Torque | 5489 N·m7442 ft-lb |
| Gear Type | Straight spur planetary |
| Gears | 7F/0R |
| 1F Gear Ratio | 6.16 |
| 2F Gear Ratio | 4.52 |
| 3F Gear Ratio | 3.33 |
| 4F Gear Ratio | 2.47 |
| 5F Gear Ratio | 1.82 |
| 6F Gear Ratio | 1.36 |
| 7F Gear Ratio | 1.00 |
| Width | 866 mm34 in |
| Height | 1092 mm43 in |
| Weight | 1692 kg3735 lb |
| Length | 1681 mm66 in |
TH48-E70 Standard Equipment
- Cat Engines for Optimized Power Train
- Cat C27 ACERT
- Cat C32 ACERT
- Cummins QST30 (950-1500 bhp ratings)
- Transmission Rotation
- Input rotation — counterclockwise
- Output rotation — counterclockwise(as viewed from rear)
- Torque Converter
- Integral torque converter
- Series
- Stall torque ratio
- Clutches
- Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
- Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)
- Installation Connections
- 2 oil cooler lines
- 1 electrical connector
- 1 pump
- Oil System
- Cat Transmission/Drive Train Oil-4 (TDTO)
- Sump oil temperatures
- Hydraulic fill capacity — Approx. 114 L (30 gal), subject to cooler size, lines, and installation.
- Filter Type — 6 micron synthetic, cartridge remote mount
- Mountings
- Input connection (flywheel) — SAE #0
- Output connections (yoke) — GWB 390.60/GWB 390.65
- Structural application subject to Caterpillar approval
- Control System
- Electronic Control Unit (ECU)
- Electronic data link, SAE J1939
- Electrical system 24V
- Power Take-Off Drives
- Location
- Mounting type: SAE 8 bolt (J704)
- Rated power
Specifications
| Gross Input Power | 895 bkW1200 BHP |
| Gross Peak Input Torque | 5995 N·m4422 ft-lb |
| Rated Input Speed | 2100 r/min2100 r/min |
| Maximum Turbine Torque | 5489 N·m7442 ft-lb |
| Gear Type | Straight spur planetary |
| Gears | 7F/0R |
| 1F Gear Ratio | 6.16 |
| 2F Gear Ratio | 4.52 |
| 3F Gear Ratio | 3.33 |
| 4F Gear Ratio | 2.47 |
| 5F Gear Ratio | 1.82 |
| 6F Gear Ratio | 1.36 |
| 7F Gear Ratio | 1.00 |
| Width | 866 mm34 in |
| Height | 1092 mm43 in |
| Weight | 1692 kg3735 lb |
| Length | 1681 mm66 in |
Equipment
TH48-E70 Standard Equipment
- Cat Engines for Optimized Power Train
- Cat C27 ACERT
- Cat C32 ACERT
- Cummins QST30 (950-1500 bhp ratings)
- Transmission Rotation
- Input rotation — counterclockwise
- Output rotation — counterclockwise(as viewed from rear)
- Torque Converter
- Integral torque converter
- Series
- Stall torque ratio
- Clutches
- Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
- Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)
- Installation Connections
- 2 oil cooler lines
- 1 electrical connector
- 1 pump
- Oil System
- Cat Transmission/Drive Train Oil-4 (TDTO)
- Sump oil temperatures
- Hydraulic fill capacity — Approx. 114 L (30 gal), subject to cooler size, lines, and installation.
- Filter Type — 6 micron synthetic, cartridge remote mount
- Mountings
- Input connection (flywheel) — SAE #0
- Output connections (yoke) — GWB 390.60/GWB 390.65
- Structural application subject to Caterpillar approval
- Control System
- Electronic Control Unit (ECU)
- Electronic data link, SAE J1939
- Electrical system 24V
- Power Take-Off Drives
- Location
- Mounting type: SAE 8 bolt (J704)
- Rated power
Related Products
