Specifications

C9 (50 Hz)

Specifications

Height - Maximum	1867 mm73.5 in
Length - Maximum	3988 mm157 in
Width - Maximum	1207 mm47.5 in
Minimum Rating	230 kVA
Maximum Rating	330 kVA
Emissions/Fuel Strategy	EU Stage IIIA, Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use only ( Tier 3 Nonroad Equivalent Emission Standards)
Voltage	220-480 Volts
Engine Model	C9 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Frequency	50 Hz
Speed	1500 rpm
Compression Ratio	16.1:1
Aspiration	Air to Air Aftercooled
Governor Type	Adem™A4
Fuel System	Hydraulic electronic unit injection
Bore	112 mm4.41 in
Displacement	8.8 l537.01 in³
Stroke	149 mm5.87 in

C9 (50 Hz) Standard Equipment

Air Inlet System
- Air cleaner, light duty with disposable paper filter

Control Panels
- EMCP 4.2

Cooling System
- Radiator and cooling fan with guard
- Coolant drain line with valve
- Fan drive, battery charging alternator drive
- Caterpillar extended life coolant

Exhaust System
- Stainless steel exhaust flex, gaskets, rain cap & SAE exhaust flange for customer use; shipped loose

Fuel System
- Standard open set fuel tank / base supplied
- Base, formed steel with single wall integral 8-hour fuel tank

Generators and Generator Attachments
- 12 leads
- IP23 protection
- Voltage regulator (single phase sensing)
- Power centre, IP22
- Segregated low voltage (AC/DC) wiring panel
- Mandatory option circuit breaker, IEC, 3 pole mounted in powercentre

Governing System
- Cat electronic governor (ADEM A4)

Lube System
- Oil cooler
- Lubricating oil
- Oil drain valves

Mounting System
- Captive linear vibration isolators between base and engine-generator
- Includes lifting provisions and termination points for coolant and lube oil drain lines

Starting / Charging System
- 24V battery with rack and cables

General
- Engine and alternator re-paint, Caterpillar Yellow

C9 (50 Hz) Optional Equipment

Certifications
- European certificate for conformance
- Global certificate fpr CIS

Air inlet system
- Single element air cleaner

Circuit Breakers
- 4 Pole (IEC-100% rated) circuit breaker upgrades: 400, 630, 800 and 100 amps

Control Panels
- Control panel Options: Volt free contacts ; Local alarm horn ; Oil temperature displays
- Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; overload shutdown via breaker ; Low fuel level shutdown ; Low fuel level alarm ; Fuel level sensor

Cooling System
- Radiator duct flange
- Low coolant temperature alarm

Enclosures
- Sound attenuated enclosure
- High ambient sound attenuated enclosure

Exhaust System
- Mufflers - End in / End out; 10 dBA or 25 dBA attenuation
- 5 - 6 inch flange adaptor
- 6 inch flange
- 5 and 6 inch elbow kits

Fuel System
- Integral duel wall fuel tank base

Generators and Attachments
- Permanent magnet generator
- Oversize, AREP, CIP generators

Mounting System
- Narrow skid base

Starting / Charging System
- 5 Amp single battery charger
- Battery disconnet switch
- Jacket water heater

Specifications

Height - Maximum	1867 mm73.5 in
Length - Maximum	3988 mm157 in
Width - Maximum	1207 mm47.5 in
Minimum Rating	230 kVA
Maximum Rating	330 kVA
Emissions/Fuel Strategy	EU Stage IIIA, Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use only ( Tier 3 Nonroad Equivalent Emission Standards)
Voltage	220-480 Volts
Engine Model	C9 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Frequency	50 Hz
Speed	1500 rpm
Compression Ratio	16.1:1
Aspiration	Air to Air Aftercooled
Governor Type	Adem™A4
Fuel System	Hydraulic electronic unit injection
Bore	112 mm4.41 in
Displacement	8.8 l537.01 in³
Stroke	149 mm5.87 in

Equipment

C9 (50 Hz) Standard Equipment

Air Inlet System
- Air cleaner, light duty with disposable paper filter

Control Panels
- EMCP 4.2

Cooling System
- Radiator and cooling fan with guard
- Coolant drain line with valve
- Fan drive, battery charging alternator drive
- Caterpillar extended life coolant

Exhaust System
- Stainless steel exhaust flex, gaskets, rain cap & SAE exhaust flange for customer use; shipped loose

Fuel System
- Standard open set fuel tank / base supplied
- Base, formed steel with single wall integral 8-hour fuel tank

Generators and Generator Attachments
- 12 leads
- IP23 protection
- Voltage regulator (single phase sensing)
- Power centre, IP22
- Segregated low voltage (AC/DC) wiring panel
- Mandatory option circuit breaker, IEC, 3 pole mounted in powercentre

Governing System
- Cat electronic governor (ADEM A4)

Lube System
- Oil cooler
- Lubricating oil
- Oil drain valves

Mounting System
- Captive linear vibration isolators between base and engine-generator
- Includes lifting provisions and termination points for coolant and lube oil drain lines

Starting / Charging System
- 24V battery with rack and cables

General
- Engine and alternator re-paint, Caterpillar Yellow

C9 (50 Hz) Optional Equipment

Certifications
- European certificate for conformance
- Global certificate fpr CIS

Air inlet system
- Single element air cleaner

Circuit Breakers
- 4 Pole (IEC-100% rated) circuit breaker upgrades: 400, 630, 800 and 100 amps

Control Panels
- Control panel Options: Volt free contacts ; Local alarm horn ; Oil temperature displays
- Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; overload shutdown via breaker ; Low fuel level shutdown ; Low fuel level alarm ; Fuel level sensor

Cooling System
- Radiator duct flange
- Low coolant temperature alarm

Enclosures
- Sound attenuated enclosure
- High ambient sound attenuated enclosure

Exhaust System
- Mufflers - End in / End out; 10 dBA or 25 dBA attenuation
- 5 - 6 inch flange adaptor
- 6 inch flange
- 5 and 6 inch elbow kits

Fuel System
- Integral duel wall fuel tank base

Generators and Attachments
- Permanent magnet generator
- Oversize, AREP, CIP generators

Mounting System
- Narrow skid base

Starting / Charging System
- 5 Amp single battery charger
- Battery disconnet switch
- Jacket water heater

Related Products

footer-border