Specifications

Overview

Cat® Stump Grinders are designed to economically remove stumps in residential, commercial and agricultural settings. They offer increased production over tow-behind grinders in situations where multiple stump removal is required. The right balance of cutting wheel speed and torque makes quick work of most tree varieties.

Specifications
Related Products

Cutting Wheel Diameter - With Teeth	547 mm22 in
Cutting Depth - Below Ground	521 mm20.5 in
Cutting Head Extension	280 mm11 in
Cutting Head Speed at Maximum Flow	993 rpm
Cutting Head Swing Range	70 degrees
Cutting Height - Above Ground	470 mm18.5 in
Cutting Wheel Width - With Teeth	83 mm3.3 in
Cutting Width - Full Swing Range	1524 mm60 in
Drive Method	Gerotor Motor- Direct
Drive Shaft Torque at Maximum Pressure	295 N·m218 lb/ft
Motor Displacement	80 cm³4.9 in³
Optimal Hydraulic Pressure	145-235 bar (2100-3400 psi)
Overall Height	730 mm30 in
Overall Length	1737 mm69 in
Overall Width	1175 mm46 in
Required Hydraulic Flow	42-86 L/min (11-23 gpm)
Weight	379 kg775 lb
Required Hydraulics	Standard Flow
Number of Carbide Teeth per Cutting Wheel	32

Specifications

Cutting Wheel Diameter - With Teeth	547 mm22 in
Cutting Depth - Below Ground	521 mm20.5 in
Cutting Head Extension	280 mm11 in
Cutting Head Speed at Maximum Flow	993 rpm
Cutting Head Swing Range	70 degrees
Cutting Height - Above Ground	470 mm18.5 in
Cutting Wheel Width - With Teeth	83 mm3.3 in
Cutting Width - Full Swing Range	1524 mm60 in
Drive Method	Gerotor Motor- Direct
Drive Shaft Torque at Maximum Pressure	295 N·m218 lb/ft
Motor Displacement	80 cm³4.9 in³
Optimal Hydraulic Pressure	145-235 bar (2100-3400 psi)
Overall Height	730 mm30 in
Overall Length	1737 mm69 in
Overall Width	1175 mm46 in
Required Hydraulic Flow	42-86 L/min (11-23 gpm)
Weight	379 kg775 lb
Required Hydraulics	Standard Flow
Number of Carbide Teeth per Cutting Wheel	32

Specifications

Overview

Specifications

Related Products