914K - 2016
Net Power 72 kW97 HP
Engine Model Cat C4.4
Maximum Gross Power - ISO 14396 74 kW100 HP
Maximum Gross Power - ISO 14396 (DIN) 74 kW101 HP
Maximum Gross Power - Maximum Engine Speed 2350 r/min2350 r/min
Maximum Gross Power - SAE J1995 76 kW102 HP
Rated Net Power - Rated Engine Speed 2200 r/min2200 r/min
Rated Net Power - SAE J1349 72 kW96 HP
Operating Weight 8488 kg18713 lb
Cooling System 21.5 l5.7 gal (US)
Fuel Tank 154 l40.7 gal (US)
Engine Crankcase 8.8 l2.3 gal (US)
Hydraulic System - Including Tank 98 l25.9 gal (US)
Rated Bucket Capacity 1.9 m³2.5 yd³
Maximum Gross Power 74 kW100 HP
Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3)
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II
Front Fixed; Locking differential (standard)
Rear Oscillating �11 degrees; Locking differential (Standard)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (4) *The measurements were conducted with the cab doors and windows closed.
Bore 105 mm4.13 in
Displacement 4.4 l268 in³
Emissions Engine meets U.S. EPA Tier 3/EU Stage IIIA emission standards.
Maximum Gross Torque - ISO 14396 450 N·m332 lb/ft
Maximum Gross Torque - SAE J1995 455 N·m336 lb/ft
Maximum Net Torque - ISO 9249 446 N·m329 lb/ft
Maximum Net Torque - SAE J1349 441 N·m325 lb/ft
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Net Power - ISO 9249 72 kW97 HP
Rated Net Power - ISO 9249 (DIN) 72 kW98 HP
Stroke 127 mm5 in
Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s1.4 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s3.7 s
Hydraulic Cycle Time - Rackback 2.2 s2.2 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s5.2 s
Hydraulic Cycle Time - Total Cycle Time 12.5 s12.5 s
Maximum Flow - Implement Pump 148 l/min39 gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 120 l/min32 gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 90 l/min24 gal/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 90 l/min24 gal/min
Maximum Working Pressure - Implement Pump 28000 kPa4061 psi
Relief Pressure - Tilt Cylinder 34000 kPa4931 psi
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 21000 kPa3046 psi
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 21000 kPa3046 psi
Axles - Front Center Differential 7.5 l2 gal (US)
Axles - Rear Center Differential 7.5 l2 gal (US)
Hydraulic Tank 55 l14.5 gal (US)
Transmission 3.4 l0.9 gal (US)
Maximum Flow - Steering Pump 82 l/min22 gal/min
Maximum Working Pressure - Steering Pump 22500 kPa3263 psi
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns3.75 turns
Steering Articulation Angle - Each Direction 40 °40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s2.8 s
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Note (2) In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Standard Size 17.5-25 12PR
Forward and Reverse - Low Range, Speed Range 1* 10 km/h6.3 mile/h
Forward and Reverse - Low Range, Speed Range 2* 20 km/h12.5 mile/h
Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Specifications

Net Power 72 kW97 HP
Engine Model Cat C4.4
Maximum Gross Power - ISO 14396 74 kW100 HP
Maximum Gross Power - ISO 14396 (DIN) 74 kW101 HP
Maximum Gross Power - Maximum Engine Speed 2350 r/min2350 r/min
Maximum Gross Power - SAE J1995 76 kW102 HP
Rated Net Power - Rated Engine Speed 2200 r/min2200 r/min
Rated Net Power - SAE J1349 72 kW96 HP
Operating Weight 8488 kg18713 lb
Cooling System 21.5 l5.7 gal (US)
Fuel Tank 154 l40.7 gal (US)
Engine Crankcase 8.8 l2.3 gal (US)
Hydraulic System - Including Tank 98 l25.9 gal (US)
Rated Bucket Capacity 1.9 m³2.5 yd³
Maximum Gross Power 74 kW100 HP
Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3)
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II
Front Fixed; Locking differential (standard)
Rear Oscillating �11 degrees; Locking differential (Standard)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (4) *The measurements were conducted with the cab doors and windows closed.
Bore 105 mm4.13 in
Displacement 4.4 l268 in³
Emissions Engine meets U.S. EPA Tier 3/EU Stage IIIA emission standards.
Maximum Gross Torque - ISO 14396 450 N·m332 lb/ft
Maximum Gross Torque - SAE J1995 455 N·m336 lb/ft
Maximum Net Torque - ISO 9249 446 N·m329 lb/ft
Maximum Net Torque - SAE J1349 441 N·m325 lb/ft
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Net Power - ISO 9249 72 kW97 HP
Rated Net Power - ISO 9249 (DIN) 72 kW98 HP
Stroke 127 mm5 in
Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s1.4 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s3.7 s
Hydraulic Cycle Time - Rackback 2.2 s2.2 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s5.2 s
Hydraulic Cycle Time - Total Cycle Time 12.5 s12.5 s
Maximum Flow - Implement Pump 148 l/min39 gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 120 l/min32 gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 90 l/min24 gal/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 90 l/min24 gal/min
Maximum Working Pressure - Implement Pump 28000 kPa4061 psi
Relief Pressure - Tilt Cylinder 34000 kPa4931 psi
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 21000 kPa3046 psi
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 21000 kPa3046 psi
Axles - Front Center Differential 7.5 l2 gal (US)
Axles - Rear Center Differential 7.5 l2 gal (US)
Hydraulic Tank 55 l14.5 gal (US)
Transmission 3.4 l0.9 gal (US)
Maximum Flow - Steering Pump 82 l/min22 gal/min
Maximum Working Pressure - Steering Pump 22500 kPa3263 psi
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns3.75 turns
Steering Articulation Angle - Each Direction 40 °40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s2.8 s
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Note (2) In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Standard Size 17.5-25 12PR
Forward and Reverse - Low Range, Speed Range 1* 10 km/h6.3 mile/h
Forward and Reverse - Low Range, Speed Range 2* 20 km/h12.5 mile/h
Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Related Products

Loading