| Engine Output - SAE J1995 | Cummins K1500E - 1880 kW (2,520 hp); Cummins QSK38 - 1880 kW (2,520 hp) |
| Standard Bucket Capacity | Face Shovel (heaped 2:1) - 26.0 m3 (34.0 yd3); Backhoe (heaped 1:1) - 28.0 m3 (36.6 yd3) |
| Operating Weight | Face Shovel - 528 tonnes (582 tons); Backhoe - 537 tonnes (592 tons) |
| Hydraulic Tank Capacity - AC Version - Approximately | 5000 l1320 gal (US) |
| Hydraulic Tank Capacity - Diesel Version - Approximately | 5500 l1450 gal (US) |
| Main Pumps | 4 × variable flow axial piston pumps |
| Main Pumps - Maximum Oil Flow - AC Version | 4 × 933 L/min (4 × 246 gal/min) |
| Main Pumps - Maximum Oil Flow - Diesel Version | 4 × 912 L/min (4 × 241 gal/min) |
| Maximum Pressure - Attachment | 300 bar4350 psi |
| Maximum Pressure - Swing Pumps | 350 bar5080 psi |
| Maximum Pressure - Travel | 340 bar4930 psi |
| Swing Pumps - AC Version | 3 × reversible swash plate pumps |
| Swing Pumps - Diesel Version | 4 × reversible swash plate pumps |
| Swing Pumps - Maximum Oil Flow - AC Version | 3 × 491 L/min (3 × 131 gal/min) |
| Swing Pumps - Maximum Oil Flow - Diesel Version | 4 × 351 L/min (4 × 93 gal/min) |
| Total Volume of Hydraulic Oil - AC Version - Approximately | 7300 l1930 gal (US) |
| Total Volume of Hydraulic Oil - Diesel Version - Approximately | 7800 l2060 gal (US) |
| Components | Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers |
| Diameter - Fan | 4 × 1170 mm (4 × 46 in) |
| Features (1) | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running |
| Features (2) | Fan speed and flow of oil to the coolers are thermostatically controlled |
| Features (3) | Extremely high cooling efficiency to ensure optimum oil temperature |
| Oil Flow of Cooling Pumps - AC Version | 4 × 491 L/min (4 × 130 gal/min) |
| Oil Flow of Cooling Pumps - Diesel Version | 4 × 488 L/min (4 × 129 gal/min) |
| Board Control System (BCS) Features | Electronic monitoring & data logging system for vital signs & service data of engines, hydraulic systems & lubrication systems |
| Components (1) | Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head and armrests |
| Components (10) | Robust instrument panel including large colored BCS screen with transflective technology |
| Components (11) | Emergency rescue seat |
| Components (12) | Emergency ladder mounted to the A-frame |
| Components (13) | Machine access via retractable boarding ladder, hydraulically operated |
| Components (14) | Roller blinds at all windows |
| Components (2) | Under roof mounted heating ventilating and air conditioning system |
| Components (3) | Windshield with parallel intermittent wiper/washer |
| Components (4) | All-round safety glass, armored windshield and sliding side window |
| Components (5) | FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure |
| Components (6) | Fold-away auxiliary seat with safety belt |
| Components (7) | External sun shields at side and rear windows |
| Components (8) | Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat |
| Components (9) | Joystick controls integrated in independently adjustable seat consoles |
| Internal Dimensions - Height | 2150 mm7.05 ft |
| Internal Dimensions - Length | 2200 mm7.22 ft |
| Internal Dimensions - Width | 1600 mm5.25 ft |
| Operator's Eye Level - Approximately | 7.6 m24.93 ft |
| Features (1) | Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody |
| Features (2) | Closed-loop swing circuit with torque control |
| Features (3) | Hydraulic braking of the swing motion by counteracting control |
| Features (4) | All raceways and the internal gearing of swing ring supplied by automatic central lubrication system |
| Maximum Swing Speed - AC Version | 4 r/min4 r/min |
| Maximum Swing Speed - Diesel Version | 3.8 r/min3.8 r/min |
| Parking Brakes | Wet multiple disc brake, spring-loaded/hydraulically released |
| Swing Drive | 4 compact planetary transmissions with axial piston motors |
| Swing Ring | Triple-race roller bearing with sealed internal gearing |
| Bottom Rollers - Each Side | 6 |
| Components (1) | All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened |
| Components (2) | Acoustic travel alarm |
| Components (3) | Cast double-grouser combined pad links with bushings connected by hardened full floating pins |
| Components (4) | Bottom rollers are connected to the automatic lubrication system |
| Components (5) | Fully hydraulic, self-adjusting track tensioning system with membrane accumulator |
| Components (6) | Automatic hydraulic retarder valve to prevent over-speed on downhill travel |
| Gradeability - Travel Drives - Maximum | 50 %50 % |
| Maximum Tractive Force | 2576 kN578900 lb |
| Parking Brakes | Wet multiple disc brake, spring-applied/hydraulically released |
| Support Rollers - Each Side | 2 plus a skid plate in between |
| Track Pads - Each Side | 39 |
| Travel Drives - Each Side | 1 planetary transmission with 2 two-stage axial piston motors |
| Travel Speed - 1st Stage - Maximum | 1.6 km/h0.99 mile/h |
| Travel Speed - 2nd Stage - Maximum | 2.3 km/h1.44 mile/h |
| Capacity - Grease Container | 1000 l264 gal (US) |
| Type (1) | Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times |
| Type (2) | System failures displayed by Board Control System |
| Type (3) | Grease filters (200 μm) between service station and container, as well as directly behind grease pump |
| Type (4) | Connected to the lube system are: - pivot points of attachment, bucket and cylinders - bottom rollers of undercarriage |
| Type (5) | Connected to the lube system are: - raceways of the swing roller bearing - two greasing pinions for the internal gearing of the swing ring |
| 6050 - Ground Pressure | 26.3 N/cm2 (38.1 psi) |
| 6050 - Note | Other track pads available on request |
| 6050 - Operating Weight | 537000 kg1183870 lb |
| 6050 - Standard Track Pads | 1400 mm4.59 ft |
| 6050 FS - Ground Pressure | 25.9 N/cm2 (37.5 psi) |
| 6050 FS - Note | Other track pads available on request |
| 6050 FS - Operating Weight | 527600 kg1163150 lb |
| 6050 FS - Standard Track Pads | 1400 mm4.59 ft |
| Alternators | 2 × 175A each |
| Batteries in Series/Parallel Installation | 6 × 210 Ah - 12V each; 630 Ah - 24V in total |
| Components (1) | Thirteen (13) LED service lights |
| Components (2) | Battery isolation relays |
| Components (3) | Emergency stop switches accessible from ground level, in engine module and in operator's cab |
| Components (4) | Ten (10) LED high-brightness working flood lights - Eight (8) for working area - Two (2) for rear end |
| Components (5) | Two (2) LED high-brightness access flood lights |
| System Voltage | 24V |
| Installation | Retractable service station installed underneath the engine module and easily accessible from ground. |
| All buckets (FS and BH) are equipped with a wear package consisting of: (2) | - Wing shrouds on side walls - Heel shrouds at bottom edges |
| Type (8) | Special wear packages for highly abrasive materials on request |
| Aspiration | Turbocharged and aftercooled |
| Bore | 159 mm6.25 in |
| Components (1) | Additional high-capacity water separator |
| Components (2) | Two-stage fuel filter including water separator |
| Components (3) | Pre-lube starting system |
| Components (4) | Eliminator with centrifuge for engine oil filtration |
| Components (5) | Hydraulically driven radiator fan with electronically controlled fan speed |
| Components (6) | Heavy-duty air filters with automatic dust evacuation |
| Components (7) | Microprocessed engine control |
| Displacement | 37.8 l2300 in³ |
| Emissions | U.S. EPA Flex |
| Fuel Tank Capacity | 10700 l2820 gal (US) |
| Make/Model | 2 × Cummins K1500E |
| Maximum Altitude - Without Deration - Above Sea Level | 2438 m8000 ft |
| Number of Cylinders - Each Engine | 12 |
| Stroke | 159 mm6.25 in |
| Total Rated Gross Power - SAE J1995 | 1880 kW 1,800 min-1 (2,520 hp 1,800 min-1) |
| Total Rated Net Power - ISO 3046/1 | 1880 kW 1,800 min-1 (2,520 hp 1,800 min-1) |
| Total Rated Net Power - SAE J1349 | 1880 kW 1,800 min-1 (2,520 hp 1,800 min-1) |
| Aspiration | Turbocharged and aftercooled |
| Bore | 159 mm6.25 in |
| Components (1) | Additional high-capacity water separator |
| Components (2) | Hydraulically driven radiator fan with electronically controlled fan speed |
| Components (3) | Eliminator with centrifuge for engine oil filtration |
| Components (4) | Pre-lube starting system |
| Components (5) | Microprocessed engine control |
| Components (6) | Heavy-duty air filters with automatic dust evacuation |
| Components (7) | Two-stage fuel filter including water separator |
| Displacement | 37.8 l2300 in³ |
| Emissions | U.S. EPA Flex |
| Fuel Tank Capacity | 10700 l2820 gal (US) |
| Make/Model | 2 × Cummins QSK38 |
| Maximum Altitude - Without Deration - Above Sea Level | 3200 m10500 ft |
| Number of Cylinders - Each Engine | 12 |
| Stroke | 159 mm6.25 in |
| Total Rated Gross Power - SAE J1995 | 1880 kW 1,800 min-1 (2,520 hp 1,800 min-1) |
| Total Rated Net Power - ISO 3046/1 | 1880 kW 1,800 min-1 (2,520 hp 1,800 min-1) |
| Total Rated Net Power - SAE J1349 | 1880 kW 1,800 min-1 (2,520 hp 1,800 min-1) |
| All buckets (FS and BH) are equipped with a wear package consisting of: (1) | - Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) | - Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) | - Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance |
| Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) | - Constant boom momentum throughout the entire lift arc - Crowd force assistance |
| Type (1) | Inspection hole in booms |
| Type (2) | Catwalks with rails at booms |
| Type (3) | Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve |
| Type (4) | Guards for shovel cylinders (FS) |
| Type (5) | Welding procedures allow for internal counter-welding (double prep weld) wherever possible |
| Type (6) | Booms and sticks are stress-relieved after welding |
| Type (7) | Booms and sticks are torsion-resistant, welded box design of high tensile steel with massive steel castings at pivot areas |
| Engine Model | 2 × Cummins K1500E or 2 × Cummins QSK 38 |
| Gross Power - SAE J1995 | 1880 kW2520 HP |
| Net Power - SAE J1349 | 1880 kW2520 HP |
| Note | Electric drive option available (1600 kW) on 6050 AC/6050 AC FS |
| Bucket Capacity - Backhoe (heaped 1:1) | 28 m³36.6 yd³ |
| Bucket Capacity - Front Shovel (heaped 2:1) | 26 m³34 yd³ |
| Bucket Payload - Backhoe | 50 t55 t |
| Bucket Payload - Front Shovel | 47 t52 t |
| Operating Weight - Backhoe | 537 t592 t |
| Operating Weight - Front Shovel | 528 t582 t |
| Frequency | 50 Hz (60 Hz on request) |
| Output | 1600 kW2146 HP |
| Rated Current IN | 174 A (at 6.6 kV) |
| Revolutions | 1,500 min-1 (1,800 min-1 at 60 Hz) |
| Starting current | 350% of IN (197% of IN optional) |
| Type (1) | Power limit control by Pump Management System |
| Type (2) | Squirrel cage induction motor |
| Type (3) | Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions |
| Voltage | 6.6 kV ± 10% (other on request) |
