Net Power |
278 kW373 HP |
Engine Model |
Cat® C15 ACERT™ |
Bore |
137 mm5.4 in |
Stroke |
171.5 mm6.75 in |
Displacement |
15.2 l927 in³ |
Emissions |
U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, and Brazil MAR-1 |
Gross Power - ISO 14396 |
335 kW449 HP |
Peak Power Speed - 1,600 rpm - SAE J1995 |
340 kW456 HP |
Peak Power Speed - 1,600 rpm - SAE J1995 (DIN) |
340 kW462 HP |
Peak Torque - 1,200 rpm - SAE J1995 |
2411 N·m1778 lb/ft |
Torque Rise |
16% |
Operating Weight |
44818 kg98806 lb |
Bucket Capacity Range |
5-10.3 m3 (6.5-13.5 yd3) |
Cat Truck Match - High Lift |
772/773 |
Cat Truck Match - Standard |
770/735/740/745 |
Rated Payload - Loose Material (High Lift) |
11 t12.1 t |
Rated Payload - Loose Material (Standard) |
12.7 t14 t |
Rated Payload - Quarry Face |
10 t11 t |
Transmission Type |
Cat Planetary Power Shift |
Forward - 1 |
7.3 km/h5 mile/h |
Forward - 2 |
12.2 km/h8 mile/h |
Reverse - 1 |
7.6 km/h5 mile/h |
Reverse - 2 |
13.6 km/h8 mile/h |
Direct Drive - Forward 2 |
12.7 km/h8 mile/h |
Direct Drive - Forward 3 |
22 km/h14 mile/h |
Direct Drive - Forward 4 |
39 km/h24 mile/h |
Direct Drive - Reverse 2 |
14.1 km/h9 mile/h |
Direct Drive - Reverse 3 |
25 km/h16 mile/h |
Lift Cylinder - Bore |
190 mm7.5 in |
Lift Cylinder - Stroke |
1138 mm45 in |
Lift/Tilt System - Circuit |
Load Sense |
Lift/Tilt System - Pump |
2 × 110 cc variable displacement |
Maximum Flow at 2,165 rpm |
470 l/min123 gal/min |
Relief Valve Setting - Lift/Tilt |
27900 kPa4050 psi |
Tilt Cylinder - Bore |
170 mm6.7 in |
Tilt Cylinder - Stroke |
722 mm28.4 in |
Rack Back |
4.5 s4.5 s |
Raise |
9 s9 s |
Dump |
3.5 s3.5 s |
Total Hydraulic Cycle Time |
21.3 s21.3 s |
Lower |
5.2 s5.2 s |
Lower Float Down |
4.3 s4.3 s |
Fuel Tank |
535 l141 gal (US) |
Crankcase |
34 l9 gal (US) |
Transmission |
75 l20 gal (US) |
Hydraulic System - Tank Only |
130 l34 gal (US) |
Axle Oil - Differentials and Final Drives - Front |
186 l49 gal (US) |
Axle Oil - Differentials and Final Drives - Rear |
170 l45 gal (US) |
Cooling Systems |
100 l26 gal (US) |
Fuel Tank - Short Lift |
481 l127 gal (US) |
Hydraulic System Factory Fill |
330 l87 gal (US) |
Bucket Capacities |
5-10.3 m3 (6.5-13.5 yd3) |
Front |
Fixed |
Rear |
Trunnion |
Oscillation Angle |
±12.5° |
Brakes |
ISO 3450:2011 |
ISO 5010:2007 - Maximum Flow at 1,400 rpm |
200 l/min52 gal/min |
ISO 5010:2007 - Steering Cutoff Pressure |
27600 kPa4000 psi |
ISO 5010:2007 - Steering System - Circuit |
Load Sense |
ISO 5010:2007 - Steering System - Pump |
Piston, variable displacement |
ISO 5010:2007 - Total Steering Angle |
70° |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Oscillation Angle - Chain Arrangement |
±8.5° |
B-Pin Height - Maximum Lift |
5371 mm17.6 ft |
Clearance at Maximum Lift |
3538 mm11.6 ft |
Front Axle Centerline to Bucket Tip |
4649 mm15.3 ft |
Ground to Center of Front Axle |
978 mm3.2 ft |
Ground to Fuel Tank Clearance |
691 mm2.3 ft |
Ground to Lower Hitch Clearance |
459 mm1.5 ft |
Ground to Top of Exhaust Stacks |
4060 mm13.3 ft |
Ground to Top of Hood |
3270 mm10.7 ft |
Ground to Top of ROPS |
4100 mm13.5 ft |
Maximum Overall Height - Bucket Raised |
7276 mm23.9 ft |
Maximum Overall Length |
11591 mm38 ft |
Note |
Specs are calculated with a 6.1 m3 (8.0 yd3) rock bucket. |
Reach - Maximum Lift |
2248 mm7.4 ft |
Rear Axle - Centerline to Bumper |
3132 mm10.3 ft |
Wheel Base |
3810 mm12.5 ft |
B-Pin Height - Maximum Lift |
4912 mm16.1 ft |
Clearance at Maximum Lift |
3079 mm10.1 ft |
Front Axle Centerline to Bucket Tip |
4201 mm13.8 ft |
Ground to Center of Front Axle |
978 mm3.2 ft |
Ground to Fuel Tank Clearance |
691 mm2.3 ft |
Ground to Lower Hitch Clearance |
459 mm1.5 ft |
Ground to Top of Exhaust Stacks |
4060 mm13.3 ft |
Ground to Top of Hood |
3270 mm10.7 ft |
Ground to Top of ROPS |
4100 mm13.5 ft |
Maximum Overall Height - Bucket Raised |
6817 mm22.4 ft |
Maximum Overall Length |
11143 mm36.6 ft |
Note |
Specs are calculated with a 6.1 m3 (8.0 yd3) rock bucket. |
Reach - Maximum Lift |
2175 mm7.1 ft |
Rear Axle - Centerline to Bumper |
3132 mm10.3 ft |
Wheel Base |
3810 mm12.5 ft |
Peak Power Speed - 1,600 rpm - ISO 14396 |
335 kW449 HP |
Peak Power Speed - 1,600 rpm - ISO 14396 (DIN) |
335 kW455 HP |
Rated Speed - 2,000 rpm - EEC 80/1269 |
278 kW373 HP |
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) |
278 kW378 HP |
Rated Speed - 2,000 rpm - ISO 9249 |
278 kW373 HP |
Rated Speed - 2,000 rpm - ISO 9249 (DIN) |
278 kW378 HP |
Rated Speed - 2,000 rpm - SAE J1349 |
278 kW373 HP |
Rated Speed - 2,000 rpm - SAE J1349 (DIN) |
278 kW378 HP |
Operating Weight - High Lift |
47175 kg104005 lb |
Operating Weight - Standard |
44355 kg97785 lb |
Rated Payload - High Lift (Loose Material) |
11 t12.1 t |
Rated Payload - High Lift (Quarry Face) |
10 t11 t |
Rated Payload - Standard (Loose Material) |
12.7 t14 t |
Rated Payload - Standard (Quarry Face) |
10 t11 t |
ROPS/FOPS |
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) |
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage IV Only) |
23 l6 gal (US) |
Machine Sound Level (ISO 6395) |
112 dB(A)112 dB(A) |
Operator Sound Level (ISO 6396) |
72 dB(A)72 dB(A) |
Machine Sound Level (ISO 6395) |
110 dB(A)110 dB(A) |
Operator Sound Level (ISO 6396) |
70 dB(A)70 dB(A) |
Direct Drive - Reverse 4 |
40.8 km/h25.4 mile/h |