| Engine Model | Cat C4.4 ACERT |
| Net Power | 101 kW137 HP |
| Bore | 105 mm4.1 in |
| Stroke | 127 mm5 in |
| Displacement | 4.4 l268.5 in³ |
| Maximum Torque - 1,400 rpm | 550 N·m406 ft·lbf |
| Engine Power - ISO 14396 Net - Metric | 108 kW (147 hp) |
| Engine Power - ISO 9249/SAE J1349 Net - Metric | 101 kW (137 hp) |
| Number of Cylinders - In Line | 4 |
| Ratings | 2000 r/min2000 r/min |
| Note | *Weight includes medium stick, 3300 kg counterweight, with full fuel tank, operator, and a 450 kg bucket. Weight varies depending on configuration. |
| Operating Weight | 13 500 to 15 200 kg (29,762 to 33,510 lb) |
| Weight - One-Piece Boom* (either 4500 mm or 4815 mm* boom) - Blade Front and Outriggers Rear | 14750 kg32518 lb |
| Weight - One-Piece Boom* (either 4500 mm or 4815 mm* boom) - Rear Blade Only | 13800 kg30424 lb |
| Weight - Optional Counterweight | 3300 kg7275 lb |
| Weight - Standard Counterweight | 2900 kg6393 lb |
| Weight - Sticks - Medium (2300 mm) | 390 kg860 lb |
| Weight - Sticks - Short (2000 mm) | 370 kg816 lb |
| Weight - VA Boom* - Blade Front and Outriggers Rear | 15100 kg33290 lb |
| Weight - VA Boom* - Rear Blade Only | 14200 kg31306 lb |
| Maximum Swing Speed | 9.8 r/min9.8 r/min |
| Maximum Swing Torque | 36 kN·m26552 ft·lbf |
| Maximum Flow - Auxiliary Circuit - High Pressure | 180 l/min47.6 gal/min |
| Maximum Flow - Auxiliary Circuit - Medium Pressure | 40 l/min10.6 gal/min |
| Maximum Flow - Implement/Travel Circuit | 180 l/min47.6 gal/min |
| Maximum Flow - Swing Mechanism | 78 l/min20.6 gal/min |
| Maximum Pressure - Auxiliary Circuit - High Pressure | 350 bar5076 psi |
| Maximum Pressure - Auxiliary Circuit - Medium Pressure | 185 bar2683 psi |
| Maximum Pressure - Implement Circuit - Heavy Lift | 375 bar5439 psi |
| Maximum Pressure - Implement Circuit - Normal and Travel Circuit | 350 bar5076 psi |
| Swing Mechanism | 350 bar5076 psi |
| System | 180 l47.6 gal (US) |
| Tank Capacity | 95 l25.1 gal (US) |
| Drawbar Pull | 76 kN17085 |
| Maximum Forward/Reverse - 2nd Gear | 37 km/h23 mile/h |
| Maximum Gradeability (14 500 kg) | 58% |
| Engine Crankcase | 8 l2.1 gal (US) |
| Cooling System | 31 l8.2 gal (US) |
| Fuel Tank - Total Capacity | 235 l62.1 gal (US) |
| Axle Clearance | 370 mm14.6 in |
| Maximum Steering Angle | 35° |
| Oscillation Axle Angle | ±8.5° |
| Maximum Travel Speed | 37 km/h23 mile/h |
| Emissions | Meets China Nonroad Stage III emission standards, equivalent to Tier 3/Stage IIIA. |
| Bucket Forces - ISO 6015 | 103 kN23155 |
| Digging Depth | 4520 mm14.8 ft |
| Digging Height | 8040 mm26.4 ft |
| Dump Height | 5810 mm19.1 ft |
| Note (1) | Range values are calculated with a bucket 1000 mm/0.6 m3 with a tip radius of 1225 mm. Values refer to stick nose pin. |
| Note (2) | Bucket and stick force values are calculated with heavy lift on and a cutting edge of 1111 mm. |
| Note (3) | *For Asia, China, Taiwan and Indonesia only. |
| Reach at Ground Level | 7770 mm25.5 ft |
| Stick Forces - ISO 6015 | 76 kN17085 |
| Bucket Forces - ISO 6015 | 103 kN23155 |
| Digging Depth | 4810 mm15.8 ft |
| Digging Height | 8060 mm26.4 ft |
| Dump Height | 5890 mm19.3 ft |
| Note (1) | Range values are calculated with a bucket 1000 mm/0.6 m3 with a tip radius of 1225 mm. Values refer to stick nose pin. |
| Note (2) | Bucket and stick force values are calculated with heavy lift on and a cutting edge of 1111 mm. |
| Note (3) | *For Asia, China, Taiwan and Indonesia only. |
| Reach at Ground Level | 7940 mm26 ft |
| Stick Forces - ISO 6015 | 69 kN15512 |
| Bucket Forces - ISO 6015 | 103 kN23155 |
| Digging Depth | 4840 mm15.9 ft |
| Digging Height | 8480 mm27.8 ft |
| Dump Height | 6060 mm19.9 ft |
| Note (1) | Range values are calculated with a bucket 1000 mm/0.6 m3 with a tip radius of 1225 mm. Values refer to stick nose pin. |
| Note (2) | Bucket and stick force values are calculated with heavy lift on and a cutting edge of 1111 mm. |
| Reach at Ground Level | 8080 mm26.5 ft |
| Stick Forces - ISO 6015 | 76 kN17085 |
| Bucket Forces - ISO 6015 | 103 kN23155 |
| Digging Depth | 5140 mm16.9 ft |
| Digging Height | 8580 mm28.1 ft |
| Dump Height | 6120 mm20.1 ft |
| Note (1) | Range values are calculated with a bucket 1000 mm/0.6 m3 with a tip radius of 1225 mm. Values refer to stick nose pin. |
| Note (2) | Bucket and stick force values are calculated with heavy lift on and a cutting edge of 1111 mm. |
| Reach at Ground Level | 8320 mm27.3 ft |
| Stick Forces - ISO 6015 | 69 kN15512 |
| Bucket Forces - ISO 6015 | 103 kN23155 |
| Digging Depth | 5010 mm16.4 ft |
| Digging Height | 9520 mm31.2 ft |
| Dump Height | 7060 mm23.2 ft |
| Note (1) | Range values are calculated with a bucket 1000 mm/0.6 m3 with a tip radius of 1225 mm. Values refer to stick nose pin. |
| Note (2) | Bucket and stick force values are calculated with heavy lift on and a cutting edge of 1111 mm. |
| Reach at Ground Level | 8330 mm27.3 ft |
| Stick Forces - ISO 6015 | 76 kN17085 |
| Bucket Forces - ISO 6015 | 103 kN23155 |
| Digging Depth | 5300 mm17.4 ft |
| Digging Height | 9670 mm31.7 ft |
| Dump Height | 7210 mm23.7 ft |
| Note (1) | Range values are calculated with a bucket 1000 mm/0.6 m3 with a tip radius of 1225 mm. Values refer to stick nose pin. |
| Note (2) | Bucket and stick force values are calculated with heavy lift on and a cutting edge of 1111 mm. |
| Reach at Ground Level | 8580 mm28.1 ft |
| Stick Forces - ISO 6015 | 69 kN15512 |
