Net Power | 403 kW541 HP |
Engine Model | Cat® C18 ACERT™ |
Net Power - SAE J1349 | 403 kW541 HP |
Bore | 145 mm5.7 in |
Stroke | 183 mm7.2 in |
Displacement | 18.1 l1105 in³ |
Torque Rise | 58 %58 % |
Rated Speed | 1,700 rpm |
Emissions | U.S. EPA Tier 4 Final/EU Stage IV Technology or Tier 2 Equivalent |
Gross - ISO 14396 | 432 kW580 HP |
Peak Power Speed | 1,500 rpm |
Peak Power Speed - 1,500 rpm - Gross - ISO 14396 | 432 kW580 HP |
Peak Power Speed - 1,500 rpm - Gross - SAE J1995 | 439 kW588 HP |
Peak Power Speed - 1,500 rpm - Net Power - SAE J1349 | 403 kW541 HP |
Peak Torque - 1,200 rpm | 2852 N·m2104 lb/ft |
Fork End Area | 6.4 m²69 ft² |
Operating Weight | 63600 kg139920 lb |
Tipping Load - Articulated 37° | 30910 kg68005 lb |
Tipping Load - Straight | 35500 kg78115 lb |
Transmission Type | Cat planetary power shift |
Forward - 1 | 6.5 km/h4 mile/h |
Forward - 2 | 11.6 km/h7.2 mile/h |
Forward - 3 | 20.4 km/h12.7 mile/h |
Forward - 4 | 34.7 km/h21.6 mile/h |
Reverse - 1 | 7.5 km/h4.7 mile/h |
Reverse - 2 | 13.3 km/h8.3 mile/h |
Reverse - 3 | 23.2 km/h14.4 mile/h |
Direct Drive - Forward 1 | Lock-up disabled |
Direct Drive - Forward 2 | 12.5 km/h7.8 mile/h |
Direct Drive - Forward 3 | 22.3 km/h13.9 mile/h |
Direct Drive - Forward 4 | 39.3 km/h24.4 mile/h |
Direct Drive - Reverse 1 | 8 km/h5 mile/h |
Direct Drive - Reverse 2 | 14.3 km/h8.9 mile/h |
Direct Drive - Reverse 3 | 25.5 km/h15.8 mile/h |
Cylinders, Double Acting - Lift, Bore and Stroke | 235 mm × 976 mm (9.25 in × 38.4 in) |
Cylinders, Double Acting - Tilt, Bore and Stroke | 292 mm × 671 mm (11.5 in × 26.4 in) |
Lift/Tilt System | Variable displacement piston |
Maximum Flow | 52 l/min13.7 gal/min |
Maximum Flow at 1,400-1,860 rpm | 580 l/min153 gal/min |
Pilot System | Variable displacement piston |
Relief Valve Setting | 4000 kPa580 psi |
Lift/Tilt System - Circuit | EH- Positive Flow Control, Flow Sharing |
Relief Valve Setting - Lift/Tilt | 32000 kPa4641 psi |
Fuel Tank | 712 l188 gal (US) |
Cooling System | 120 l31.7 gal (US) |
Crankcase | 60 l15.9 gal (US) |
Transmission | 120 l31.7 gal (US) |
Differential - Final Drives - Front | 186 l49.1 gal (US) |
Differential - Final Drives - Rear | 186 l49.1 gal (US) |
Hydraulic System - Tank Only | 240 l63.4 gal (US) |
Diesel Exhaust Fluid Tank | 33 l8.7 gal (US) |
Hydraulic System Factory Fill | 475 l125.5 gal (US) |
Dump Angle at Maximum Lift | 39.4 °39.4 ° |
Fork Height at Maximum Lift | 4660 mm15.3 ft |
Fork Height with Level Arms | 2468 mm8.1 ft |
Fork Top Clamp Opening | 3741 mm12.3 ft |
Front Axle Centerline to Fork Tip | 4765 mm15.6 ft |
Ground to Bumper Clearance | 933 mm3.1 ft |
Ground to Center of Front Axle | 978 mm3.2 ft |
Ground to Lower Hitch Clearance | 568 mm1.9 ft |
Ground to Top of Exhaust Stacks | 4214 mm13.8 ft |
Ground to Top of Hood | 3334 mm10.9 ft |
Ground to Top of ROPS | 4221 mm13.8 ft |
Hinge Pin Height at Maximum Lift | 4918 mm16.1 ft |
Maximum Overall Length | 12502 mm41 ft |
Rear Axle - Centerline to Bumper | 3187 mm10.5 ft |
Wheel Base | 4550 mm14.9 ft |
Front | Fixed |
Rear | Trunnion |
Oscillation Angle | 13° |
Brakes | SAE J1473 OCT90, ISO 3450:1992 |
Steering System - Circuit | Pilot, load sensing |
Steering System - Pump | Piston, variable displacement |
Relief Valve Setting - Steering | 30000 kPa4351 psi |
Maximum Flow | 270 l/min71.3 gal/min |
Steering Cycle Times - High Idle | 3.4 s3.4 s |
Steering Cycle Times - Low Idle | 5.6 s5.6 s |
Total Steering Angle | 74 °74 ° |
Machine Sound Level (ISO 6395) | 111 dB(A)111 dB(A) |
Operator Sound Level (ISO 6396) | 71 dB(A)71 dB(A) |
Machine Sound Level (ISO 6395) | 109 dB(A)109 dB(A) |
Operator Sound Level (ISO 6396) | 70 dB(A)70 dB(A) |