Emissions | Tier 3/Stage IIIA |
Engine Model | Cat C9.3 ACERT |
Maximum Gross Power - 1,700 rpm - ISO 14396 - Metric | 227 kW309 HP |
Net Power - ISO 9249 | 207 kW281 HP |
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric | 207 kW281 HP |
Cooling System | 71.6 l18.9 gal (US) |
Crankcase | 24.5 l6.5 gal (US) |
Transmission | 58.5 l15.5 gal (US) |
Hydraulic Tank | 125 l33 gal (US) |
Differential - Final Drives - Front | 57 l15.1 gal (US) |
Differential - Final Drives - Rear | 57 l15.1 gal (US) |
Note (1) | *Distance of 15 m, moving forward in second gear ratio. |
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** | 69 dB(A)69 dB(A) |
Operating Weight | 23220 kg51176 lb |
Bucket Capacities | 3.20-7.40 m³ (4.19-9.68 yd³) |
Forward - 1 | 6.5 km/h4 mile/h |
Forward - 2 | 13.1 km/h8.1 mile/h |
Forward - 3 | 23.5 km/h14.6 mile/h |
Forward - 4 | 39.5 km/h24.5 mile/h |
Breakout Force | 173 kN38984 lbf |
Static Tipping Load - Full 37° Turn - No Tire Deflection | 15822 kg34873 lb |
Static Tipping Load - Full 37° Turn - With Tire Deflection | 14686 kg32377 lb |
Note (2) | **For machines in countries that adopt the ?EU Directives.? |
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** | 108 LWA*** |
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | 72 dB(A)72 dB(A) |
Reverse - 1 | 7.1 km/h4.4 mile/h |
Reverse - 2 | 14.4 km/h8.9 mile/h |
Reverse - 3 | 25.9 km/h16.1 mile/h |
Implement Pump Type | Variable Displacement Piston |
Implement System - Maximum Operating Pressure | 31000 kPa4496 psi |
Implement System - Maximum Pump Output at 2,200 rpm | 360 l/min95 gal/min |
Fuel Tank | 303 l80 gal (US) |
Displacement | 9.3 l568 in³ |
Reverse - 4 | 39.5 km/h24.5 mile/h |
Bucket Range | 3.20-7.40 m³ (4.19-9.68 yd³) |
Centerline of Rear Axle to Edge of Counterweight | 2500 mm8.17 ft |
Centerline of Rear Axle to Hitch | 1775 mm5.83 ft |
Ground Clearance | 434 mm1.42 ft |
Height - Top of Exhaust Pipe | 3522 mm11.58 ft |
Height - Top of Hood | 2818 mm9.25 ft |
Height - Top of ROPS | 3859 mm12.66 ft |
Hinge Pin Height at Carry | 778 mm2.58 ft |
Hinge Pin Height at Maximum Lift | 4793 mm15.75 ft |
Lift Arm Clearance at Maximum Lift | 4140 mm13.5 ft |
Maximum Width over Tires | 3009 mm9.92 ft |
Note | All dimensions are approximate and based on L3 XHA2 tires. |
Overall Length - Without Bucket | 8111 mm26.61 ft |
Rack Back - Carry Height | 49 degrees |
Rack Back - Maximum Lift | 71 degrees |
Rack Back at Ground | 39 degrees |
Tread Width | 2230 mm7.33 ft |
Wheel Base | 3550 mm11.67 ft |
Centerline of Rear Axle to Edge of Counterweight | 2251 mm7.39 ft |
Centerline of Rear Axle to Hitch | 1775 mm5.83 ft |
Ground Clearance | 434 mm1.42 ft |
Height - Top of Exhaust Pipe | 3522 mm11.58 ft |
Height - Top of Hood | 2818 mm9.25 ft |
Height - Top of ROPS | 3859 mm12.66 ft |
Hinge Pin Height at Carry | 630 mm2.08 ft |
Hinge Pin Height at Maximum Lift | 4235 mm13.92 ft |
Lift Arm Clearance at Maximum Lift | 3643 mm11.92 ft |
Maximum Width over Tires | 3009 mm9.92 ft |
Note | All dimensions are approximate and based on L3 XHA2 tires. |
Overall Length - Without Bucket | 7362 mm24.15 ft |
Rack Back - Carry Height | 50 degrees |
Rack Back - Maximum Lift | 62 degrees |
Rack Back at Ground | 42 degrees |
Tread Width | 2230 mm7.33 ft |
Wheel Base | 3550 mm11.67 ft |
Maximum Net Torque - 1,000 rpm | 1507 N·m1112 lb/ft |
Peak Gross Torque - 1,200 rpm - ISO 14396 | 1581 N·m1166 lb/ft |
Hydraulic Cycle Time - Total | 10.1 s10.1 s |
Note (1) | For a machine configuration as defined under ?Weight.? |
Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Note (3) | ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.? |
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) | 109 dB(A)109 dB(A) |
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) | 76 dB(A)* |
Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm roll radius. |
Note | Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 4.2 m3 general purpose bucket with BOCE. |