Specifications

C3.6

Specifications

Minimum Power	55 bkW74 BHP
Maximum Power	90 bkW121 BHP
Rated Speed	2200-2400 rpm
Emissions	U.S. EPA Tier 3 Nonroad Equivalent Emission Standards (Not Currently EPA Certified). EU Stage IIIA Nonroad Equivalent Emission Standards (Non-Current for EU).
Engine Configuration	Inline 4, 4-Stroke-Cycle Diesel
Bore	98 mm (3.9 in)
Stroke	120 mm (4.7 in)
Aspiration	Turbocharged Aftercooled (TA)
Displacement	3.6 L (220 in³)
Compression Ratio	17.0:1
Combustion System	Direct Injection
Rotation from Flywheel End	Counterclockwise
Lube System - Refill	4 L (1.06 qt)
Height	776 mm (30.6 in)
Length	667 mm (26.3 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments	275 kg (606 lb)
Width	569 mm (22.4 in)

C3.6 Standard Equipment

Control System
- Starter motor (12V or 24V)
- Alternator (12V or 24V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939

Flywheels and Flywheel Housing
- Flywheel housings - SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface

Fuel System
- Fuel filter - preconnected but chassis mounted
- With water sensor

Lube System
- Lubricating oil filters
- High incline oil pan - 35 degrees continuous in all directions

General
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request

Exterior

Emissions

Emissions

Reliable, Quiet and Durable Power

Reliable, Quiet and Durable Power

High Performance

High Performance

Broad Application Range

Broad Application Range

Low Cost Maintenance

Low Cost Maintenance

Quality

Quality

World-class Product Support Offered Through Global Cat Dealer Network

World-class Product Support Offered Through Global Cat Dealer Network

Specifications

Minimum Power	55 bkW74 BHP
Maximum Power	90 bkW121 BHP
Rated Speed	2200-2400 rpm
Emissions	U.S. EPA Tier 3 Nonroad Equivalent Emission Standards (Not Currently EPA Certified). EU Stage IIIA Nonroad Equivalent Emission Standards (Non-Current for EU).
Engine Configuration	Inline 4, 4-Stroke-Cycle Diesel
Bore	98 mm (3.9 in)
Stroke	120 mm (4.7 in)
Aspiration	Turbocharged Aftercooled (TA)
Displacement	3.6 L (220 in³)
Compression Ratio	17.0:1
Combustion System	Direct Injection
Rotation from Flywheel End	Counterclockwise
Lube System - Refill	4 L (1.06 qt)
Height	776 mm (30.6 in)
Length	667 mm (26.3 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments	275 kg (606 lb)
Width	569 mm (22.4 in)

Equipment

C3.6 Standard Equipment

Control System
- Starter motor (12V or 24V)
- Alternator (12V or 24V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939

Flywheels and Flywheel Housing
- Flywheel housings - SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface

Fuel System
- Fuel filter - preconnected but chassis mounted
- With water sensor

Lube System
- Lubricating oil filters
- High incline oil pan - 35 degrees continuous in all directions

General
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request

360° Interactive

Exterior

Benefits and Features

Emissions

Emissions

Reliable, Quiet and Durable Power

Reliable, Quiet and Durable Power

High Performance

High Performance

Broad Application Range

Broad Application Range

Low Cost Maintenance

Low Cost Maintenance

Quality

Quality

World-class Product Support Offered Through Global Cat Dealer Network

World-class Product Support Offered Through Global Cat Dealer Network

Related Products

footer-border