M 32 E

Specifications

Power Range3300 - 4950 kW
Speed Range720-750 rpm
EmissionsIMO II / IMO III with SCR
AspirationTurbocharged
Bore320 mm12.6 in
Stroke480 mm18.9 in
Rotation from Flywheel EndCounterclockwise/Clockwise
Configuration6,8,9 Cylinder
Swept Volume37 l2257.88 in³
Minimum Dry Weight37.5 ton (US)82673.4 lb
Minimum Length6055 mm238.4 in
Maximum Length7850 mm309.1 in
Minimum Height3862 mm152 in
Maximum Height4406 mm173.5 in
Minimum Width2195 mm86.4 in
Maximum Width2195 mm86.4 in

M 32 E Standard Equipment

  • Air Inlet System
    • Air intake silencer/filter
  • Control System
    • Load sharing unit (for multiple engine plant only)
    • Modular Alarm Control and Protection System (MACS)
    • Serial link interface (MODbus / canbus)
    • Speed governor
  • Cooling System
    • 2-stage charge air cooler
    • Electronic cooling water preheater
    • HT cooling water pump (engine driven)
  • Exhaust System
    • Exhaust gas expansion joint
    • Exhaust gas insulated manifolds
    • Turbocharger at flywheel end
  • Fuel System
    • Fuel circulating pump (attached / for MDO/MGO only)
    • Fuel indicator filter
    • Fuel pressure valve (attached / for MDO/MGO only)
  • Instrumentation
    • Local control panel
    • Pressure and temperature indicator
  • Lube System
    • Dry sump
    • Lube oil plate cooler (separate)
    • Lube oil pump (engine driven)
    • Lube oil safety filter
    • Lube oil self-cleaning filter
    • Pressure regulating valve
  • Mounting System
    • High flexible coupling
    • Rigid mounting
  • Starting System
    • Electrical barring device
    • Starting air valve
  • General
    • Lifting device (rental)
    • Torsional Vibration Calculation (TVC)

M 32 E Optional Equipment

  • Air Inlet System
    • Air inlet shut-off valve
    • Air inlet transition piece
    • Expansion joint
    • Silencer/filter
  • Control System
    • Air injection control (for better load acceptance)
    • Electronic speed governor cabinet
    • Engine alarm system
    • Remote control system
    • Remote indicators (start air pressure, engine speed, etc.)
    • Starter for electric driven pumps
    • 24 DC UPS
  • Cooling System
    • FW/SW plate cooler
    • HT cooling water pump (electric driven)
    • LT cooling water pump (electric driven)
    • Sea water cooling pump (electric driven)
    • Steam / thermal oil cooling water preheater
    • Temperature control valve
  • Exhaust System
    • Silencer (with or without spart arrester)
    • Turbocharger at counter-flywheel side
  • Fuel System
    • Fuel oil cooler
    • HFO final preheater
    • HFO pressure regulating valve
    • HFO self-cleaning automatic filter
    • HFO supply and booster pumps (electrical driven)
    • HFO treatment and supply modules
    • HFO viscosity control device
    • Mixing tank
  • Lube System
    • Lube oil centrifuge
    • Lube oil pump (electrical driven)
    • Lube oil treatment and combined modules
    • Pre-lubricating oil pump (electrical driven)
    • Temperature control valve
    • Wet sump with dip stick
  • Mounting System
    • Flexible pipe connections
    • Resilient mounting
  • Starting System
    • Starting air compressor
    • Starting air receiver
  • General
    • Cat Propulsion Systems
    • Engine PTO coupling
    • Part load optimization kit for constant speed engine (SFOC improvement, smoke reduction)
    • Part load optimization kit for variable speed engine (massive SFOC improvement,…)
    • PTO alternator
    • PTO shaft on counter-flywheel side
    • Reduction gear
    • Reduction gear PTO coupling

Specifications

Power Range3300 - 4950 kW
Speed Range720-750 rpm
EmissionsIMO II / IMO III with SCR
AspirationTurbocharged
Bore320 mm12.6 in
Stroke480 mm18.9 in
Rotation from Flywheel EndCounterclockwise/Clockwise
Configuration6,8,9 Cylinder
Swept Volume37 l2257.88 in³
Minimum Dry Weight37.5 ton (US)82673.4 lb
Minimum Length6055 mm238.4 in
Maximum Length7850 mm309.1 in
Minimum Height3862 mm152 in
Maximum Height4406 mm173.5 in
Minimum Width2195 mm86.4 in
Maximum Width2195 mm86.4 in

Equipment

M 32 E Standard Equipment

  • Air Inlet System
    • Air intake silencer/filter
  • Control System
    • Load sharing unit (for multiple engine plant only)
    • Modular Alarm Control and Protection System (MACS)
    • Serial link interface (MODbus / canbus)
    • Speed governor
  • Cooling System
    • 2-stage charge air cooler
    • Electronic cooling water preheater
    • HT cooling water pump (engine driven)
  • Exhaust System
    • Exhaust gas expansion joint
    • Exhaust gas insulated manifolds
    • Turbocharger at flywheel end
  • Fuel System
    • Fuel circulating pump (attached / for MDO/MGO only)
    • Fuel indicator filter
    • Fuel pressure valve (attached / for MDO/MGO only)
  • Instrumentation
    • Local control panel
    • Pressure and temperature indicator
  • Lube System
    • Dry sump
    • Lube oil plate cooler (separate)
    • Lube oil pump (engine driven)
    • Lube oil safety filter
    • Lube oil self-cleaning filter
    • Pressure regulating valve
  • Mounting System
    • High flexible coupling
    • Rigid mounting
  • Starting System
    • Electrical barring device
    • Starting air valve
  • General
    • Lifting device (rental)
    • Torsional Vibration Calculation (TVC)

M 32 E Optional Equipment

  • Air Inlet System
    • Air inlet shut-off valve
    • Air inlet transition piece
    • Expansion joint
    • Silencer/filter
  • Control System
    • Air injection control (for better load acceptance)
    • Electronic speed governor cabinet
    • Engine alarm system
    • Remote control system
    • Remote indicators (start air pressure, engine speed, etc.)
    • Starter for electric driven pumps
    • 24 DC UPS
  • Cooling System
    • FW/SW plate cooler
    • HT cooling water pump (electric driven)
    • LT cooling water pump (electric driven)
    • Sea water cooling pump (electric driven)
    • Steam / thermal oil cooling water preheater
    • Temperature control valve
  • Exhaust System
    • Silencer (with or without spart arrester)
    • Turbocharger at counter-flywheel side
  • Fuel System
    • Fuel oil cooler
    • HFO final preheater
    • HFO pressure regulating valve
    • HFO self-cleaning automatic filter
    • HFO supply and booster pumps (electrical driven)
    • HFO treatment and supply modules
    • HFO viscosity control device
    • Mixing tank
  • Lube System
    • Lube oil centrifuge
    • Lube oil pump (electrical driven)
    • Lube oil treatment and combined modules
    • Pre-lubricating oil pump (electrical driven)
    • Temperature control valve
    • Wet sump with dip stick
  • Mounting System
    • Flexible pipe connections
    • Resilient mounting
  • Starting System
    • Starting air compressor
    • Starting air receiver
  • General
    • Cat Propulsion Systems
    • Engine PTO coupling
    • Part load optimization kit for constant speed engine (SFOC improvement, smoke reduction)
    • Part load optimization kit for variable speed engine (massive SFOC improvement,…)
    • PTO alternator
    • PTO shaft on counter-flywheel side
    • Reduction gear
    • Reduction gear PTO coupling

Related Products

Loading