3512C

Specifications

Minimum Rating1550 eKW (1937 kVA)
Maximum Rating1700 eKW (2125 kVA)
Frequency60 hz
Speed1800
ConfigurationVee 12 4-Stroke-Cycle Diesel
AspirationTTA
Bore170 mm6.7 in
Stroke215 mm8.46 in
Displacement58.56 l3574 in³
EmissionsIMO II
Length5085.3 mm200.2 in
Width2142.1 mm84.3 in
Height2131.1 mm83.9 in
Weight - Estimated12762 kg28136 lb

3512C Standard Equipment

  • AIR INLET SYSTEM
    • Corrosion resistant separate circuit aftercooler core, regular duty air cleaners, dual turbochargers
  • CONTROL SYSTEM
    • Caterpillar A-III electronic engine control, Electronic Unit Injection fuel system, rigid wiring harness
  • COOLING SYSTEM
    • Auxiliary fresh water pump, centrifugal non-self-priming auxiliary sea water pump, gear driven centrifugal jacket water pump, expansion tank, engine oil cooler, thermostats and housing
  • EXHAUST SYSTEM
    • Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with water-cooled bearings and heat shields, vertical exhaust outlet
  • FLYWHEELS & FLYWHEEL HOUSINGS
    • Flywheel, SAE No. 00, 183 teeth Flywheel housing, SAE No. 00
  • FUEL SYSTEM
    • Fuel filter, RH, with service indicators
    • Fuel transfer pump
    • Electronically Controlled Unit Injectors
  • INSTRUMENTATION
    • Engine mounted instrument panel with four position switch, over speed shutdown notification light, emergency stop notification light, graphical display unit for analog or digital display of: oil and fuel pressure, oil and fuel filter differential, system DC voltage, exhaust and water temperature, air inlet restriction, service meter, engine speed, fuel consumption (total and instantaneous)
  • LUBE SYSTEM
    • Top mounted crankcase breather, RH oil filter, RH oil filler, gear type oil pump, deep sump oil pan, recommended use of Caterpillar Diesel Engine Oil 10W30 or 15W40
  • MOUNTING SYSTEM
    • Industrial type engine mounting rails)
  • POWER TAKE-OFFS
    • Accessory drive Lower RH, Lower LH Front housing, Two-sided
  • PROTECTION SYSTEM
    • A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
    • Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection for oil pressure and water temperature, over speed protection
  • GENERAL
    • Vibration damper and guard Paint, Caterpillar Yellow engine with black rails. Lifting eyes

3512C Optional Equipment

  • AIR INLET SYSTEM
    • Air Cleaner Removal
    • Remote Air Inlet Adapters
  • CHARGING SYSTEM
    • Battery Chargers
    • Charging Alternators
  • CONTROL SYSTEM
    • Load Sharing module
    • Local speed throttle control
  • COOLING SYSTEM
    • Water level switch gauge
    • Coolant level sensors
    • Connections
    • Keel Cooling Conversions
    • Radiator cooling conversion
    • Heat exchangers
    • Auxiliary water pumps
    • Sea water pump removal
    • Air separator
  • EXHAUST SYSTEM
    • Exhaust outlet
    • Flexible fittings
    • Elbows
    • Flanges
    • Flange and exhaust expanders
    • Mufflers
  • FUEL SYSTEM
    • Fuel Cooler
    • Fuel priming pumps
    • Flexible fuel lines
    • Rigid Fuel Lines
    • Primary fuel filter
    • Fuel level switch
  • GENERATORS AND GENERATOR ATTACHMENTS
    • 1500/1800 RPM, 1000/1200 RPM
    • Low Voltage Connection
    • Generator Conversion
    • Low Voltage Extension Box
    • RFI Filter
    • Bearing Temperature Detectors
    • Manual Voltage Control
    • Air Filter
  • INSTRUMENTATION
    • PL1000T Communication Module
    • PL1000E Communication Module
    • Customer Interface Box
    • Thermocouples
    • Remote panel display
    • Remote cylinder temperature display
  • LUBE SYSTEM
    • Oil Pan
    • Oil pan accessories
    • Sump pumps
    • Prelubrication Options
    • Lubricating oil
    • Centrifugal Oil Filter
  • MOUNTING SYSTEM
    • Vibration isolators
    • Rails
  • POWER TAKE-OFFS
    • Flywheel guard
    • Flexible coupling
    • Coupling hub
    • Front housing accessories
    • Upper left hand front location
    • Upper left hand rear location
    • Upper right hand front location:
    • Upper right hand rear location
    • Lower left hand front location
    • Front housing accessory drives
    • Front power take-offs
    • Crankshaft pulleys
    • Damper guard removals
  • PROTECTION SYSTEM
    • Air inlet shutoffs
    • Switches and contactors
    • Explosion relief valve
    • Sensors
  • STARTING SYSTEM
    • Starting motors or barring divice
    • Air starting motors options
    • Battery sets - 24 volt - Dry
    • Battery rack
    • Jacket Water Heater
  • GENERAL
    • Tool set
    • Caterpillar datalink wire
  • SVCE TOOLS/SHIP PROT/FACTORY SUPPORT
    • Commissioning

Specifications

Minimum Rating1550 eKW (1937 kVA)
Maximum Rating1700 eKW (2125 kVA)
Frequency60 hz
Speed1800
ConfigurationVee 12 4-Stroke-Cycle Diesel
AspirationTTA
Bore170 mm6.7 in
Stroke215 mm8.46 in
Displacement58.56 l3574 in³
EmissionsIMO II
Length5085.3 mm200.2 in
Width2142.1 mm84.3 in
Height2131.1 mm83.9 in
Weight - Estimated12762 kg28136 lb

Equipment

3512C Standard Equipment

  • AIR INLET SYSTEM
    • Corrosion resistant separate circuit aftercooler core, regular duty air cleaners, dual turbochargers
  • CONTROL SYSTEM
    • Caterpillar A-III electronic engine control, Electronic Unit Injection fuel system, rigid wiring harness
  • COOLING SYSTEM
    • Auxiliary fresh water pump, centrifugal non-self-priming auxiliary sea water pump, gear driven centrifugal jacket water pump, expansion tank, engine oil cooler, thermostats and housing
  • EXHAUST SYSTEM
    • Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with water-cooled bearings and heat shields, vertical exhaust outlet
  • FLYWHEELS & FLYWHEEL HOUSINGS
    • Flywheel, SAE No. 00, 183 teeth Flywheel housing, SAE No. 00
  • FUEL SYSTEM
    • Fuel filter, RH, with service indicators
    • Fuel transfer pump
    • Electronically Controlled Unit Injectors
  • INSTRUMENTATION
    • Engine mounted instrument panel with four position switch, over speed shutdown notification light, emergency stop notification light, graphical display unit for analog or digital display of: oil and fuel pressure, oil and fuel filter differential, system DC voltage, exhaust and water temperature, air inlet restriction, service meter, engine speed, fuel consumption (total and instantaneous)
  • LUBE SYSTEM
    • Top mounted crankcase breather, RH oil filter, RH oil filler, gear type oil pump, deep sump oil pan, recommended use of Caterpillar Diesel Engine Oil 10W30 or 15W40
  • MOUNTING SYSTEM
    • Industrial type engine mounting rails)
  • POWER TAKE-OFFS
    • Accessory drive Lower RH, Lower LH Front housing, Two-sided
  • PROTECTION SYSTEM
    • A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
    • Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection for oil pressure and water temperature, over speed protection
  • GENERAL
    • Vibration damper and guard Paint, Caterpillar Yellow engine with black rails. Lifting eyes

3512C Optional Equipment

  • AIR INLET SYSTEM
    • Air Cleaner Removal
    • Remote Air Inlet Adapters
  • CHARGING SYSTEM
    • Battery Chargers
    • Charging Alternators
  • CONTROL SYSTEM
    • Load Sharing module
    • Local speed throttle control
  • COOLING SYSTEM
    • Water level switch gauge
    • Coolant level sensors
    • Connections
    • Keel Cooling Conversions
    • Radiator cooling conversion
    • Heat exchangers
    • Auxiliary water pumps
    • Sea water pump removal
    • Air separator
  • EXHAUST SYSTEM
    • Exhaust outlet
    • Flexible fittings
    • Elbows
    • Flanges
    • Flange and exhaust expanders
    • Mufflers
  • FUEL SYSTEM
    • Fuel Cooler
    • Fuel priming pumps
    • Flexible fuel lines
    • Rigid Fuel Lines
    • Primary fuel filter
    • Fuel level switch
  • GENERATORS AND GENERATOR ATTACHMENTS
    • 1500/1800 RPM, 1000/1200 RPM
    • Low Voltage Connection
    • Generator Conversion
    • Low Voltage Extension Box
    • RFI Filter
    • Bearing Temperature Detectors
    • Manual Voltage Control
    • Air Filter
  • INSTRUMENTATION
    • PL1000T Communication Module
    • PL1000E Communication Module
    • Customer Interface Box
    • Thermocouples
    • Remote panel display
    • Remote cylinder temperature display
  • LUBE SYSTEM
    • Oil Pan
    • Oil pan accessories
    • Sump pumps
    • Prelubrication Options
    • Lubricating oil
    • Centrifugal Oil Filter
  • MOUNTING SYSTEM
    • Vibration isolators
    • Rails
  • POWER TAKE-OFFS
    • Flywheel guard
    • Flexible coupling
    • Coupling hub
    • Front housing accessories
    • Upper left hand front location
    • Upper left hand rear location
    • Upper right hand front location:
    • Upper right hand rear location
    • Lower left hand front location
    • Front housing accessory drives
    • Front power take-offs
    • Crankshaft pulleys
    • Damper guard removals
  • PROTECTION SYSTEM
    • Air inlet shutoffs
    • Switches and contactors
    • Explosion relief valve
    • Sensors
  • STARTING SYSTEM
    • Starting motors or barring divice
    • Air starting motors options
    • Battery sets - 24 volt - Dry
    • Battery rack
    • Jacket Water Heater
  • GENERAL
    • Tool set
    • Caterpillar datalink wire
  • SVCE TOOLS/SHIP PROT/FACTORY SUPPORT
    • Commissioning

Related Products

Loading