Specifications
Overview
Cat® C1.5 Diesel Marine Generator Set has single phase ratings of 50 Hertz at 10.0 ekW and 60 Hertz at 12.0 ekW that meet U.S. EPA Tier 3 and EU IW emission standards. The Cat® C1.5 also has three phase ratings of 50 Hertz at 11.0 ekW and 60 Hertz at 13.0 ekW that meet U.S. EPA Tier 3 and EU IW emissions standards. This generator set is available in 12 or 24 volt as an open gen set or as an enclosed package.
Minimum Rating | 10 ekW (10 kVA) |
Maximum Rating | 13 ekW (16.5 kVA) |
Frequency | 50 Hz or 60 Hz |
Speed | 1500 rpm (50Hz) or 1800 rpm (60 Hz) |
Engine Model | C1.5, In-line 3, 4-Stroke-Cycle-Diesel |
Aspiration | Naturally Aspirated |
Bore | 84 mm3.31 in |
Stroke | 90 mm3.5 in |
Displacement | 1.5 l91 in³ |
Governor Type | Electrical Isochronous |
Emissions/Fuel Strategy | 60 Hz meets EPA Tier 3*, 50 Hz meets EU 97/68EC Stage II regulations |
Weight | 319 kg/703 lbs (open), 368 kg/811 lbs (enclosed) |
Length | 37.4 in/962 mm (open), 40 in/1021 mm (enclosed) |
Width | 21 in/533 mm (open), 24 in/608 mm (enclosed) |
Height | 27.5 in/699 mm (open), 28 in/710 mm (enclosed) |
Excitation | AREP |
Insulation | Class H |
Voltage Regulation | ±0.5% |
Frame Size | 1.5 |
C1.5 Standard Equipment
- Air Inlet System
- Air cleaner, single element canister type with rain cap (open generator set only)
- Control System
- Electronic isochronous governor
- Cooling System
- Belt-driven centrifugal jacket water pump
- gear-driven seawater pump
- heat exchanger with copper nickel tubes
- expansion tank
- Exhaust System
- Watercooled exhaust manifold and elbow
- Fuel System
- Fuel filter — RH or LH service
- fuel priming
- fuel transfer pump
- flexible fuel lines
- Lube System
- Lubricating oil
- oil filter (RH)
- dipstick (RH)
- fumes disposal (closed system)
- Mounting System
- Anti-vibration mounts, connected to drip tray and steel base sitting on PVC foam sound-absorbent pad
- Protection System
- Electronic automatic safety shutdown for low oil pressure, high water temperature, high exhaust (wet exhaust only) temperature, and overspeed
- Starting System
- 12 or 24 volt electronic starting motor, 12 volt 55 amp alternator
- General
- Single-side service (RH), decals, literature
Specifications
Minimum Rating | 10 ekW (10 kVA) |
Maximum Rating | 13 ekW (16.5 kVA) |
Frequency | 50 Hz or 60 Hz |
Speed | 1500 rpm (50Hz) or 1800 rpm (60 Hz) |
Engine Model | C1.5, In-line 3, 4-Stroke-Cycle-Diesel |
Aspiration | Naturally Aspirated |
Bore | 84 mm3.31 in |
Stroke | 90 mm3.5 in |
Displacement | 1.5 l91 in³ |
Governor Type | Electrical Isochronous |
Emissions/Fuel Strategy | 60 Hz meets EPA Tier 3*, 50 Hz meets EU 97/68EC Stage II regulations |
Weight | 319 kg/703 lbs (open), 368 kg/811 lbs (enclosed) |
Length | 37.4 in/962 mm (open), 40 in/1021 mm (enclosed) |
Width | 21 in/533 mm (open), 24 in/608 mm (enclosed) |
Height | 27.5 in/699 mm (open), 28 in/710 mm (enclosed) |
Excitation | AREP |
Insulation | Class H |
Voltage Regulation | ±0.5% |
Frame Size | 1.5 |
Equipment
C1.5 Standard Equipment
- Air Inlet System
- Air cleaner, single element canister type with rain cap (open generator set only)
- Control System
- Electronic isochronous governor
- Cooling System
- Belt-driven centrifugal jacket water pump
- gear-driven seawater pump
- heat exchanger with copper nickel tubes
- expansion tank
- Exhaust System
- Watercooled exhaust manifold and elbow
- Fuel System
- Fuel filter — RH or LH service
- fuel priming
- fuel transfer pump
- flexible fuel lines
- Lube System
- Lubricating oil
- oil filter (RH)
- dipstick (RH)
- fumes disposal (closed system)
- Mounting System
- Anti-vibration mounts, connected to drip tray and steel base sitting on PVC foam sound-absorbent pad
- Protection System
- Electronic automatic safety shutdown for low oil pressure, high water temperature, high exhaust (wet exhaust only) temperature, and overspeed
- Starting System
- 12 or 24 volt electronic starting motor, 12 volt 55 amp alternator
- General
- Single-side service (RH), decals, literature
Related Products