M 25 C

Specifications

Minimum Rating1669 kWe (2088 kVA)
Maximum Rating2877 kWe (3600 kVA)
Configuration6,8,9 Cylinder
Bore255 mm10 in
Stroke400 mm15.75 in
Swept Volume20.4 l/cyl1244.88 in³
Emissions/Fuel StrategyIMO II
Height3911 mm - 3963 mm (154.0 in - 156.0 in)
Length8070 mm - 9516 mm (317.7 in - 374.6 in)
Weight43 t - 56 t (94799 lbs - 123459 lbs)
Width2479 mm - 2534 mm ( 97.6 in - 99.8 in)

M 25 C Standard Equipment

  • Air Inlet System
    • Air intake silencer / filter
  • Control System
    • Load sharing unit (for multiple engine plant only)
    • Protection system
    • Serial link interface (MODbus / canbus)
    • Speed governor
  • Cooling System
    • Electric cooling water preheater
    • HT cooling water pump (engine driven)
    • 2-stage charge air cooler
  • Exhaust System
    • Exhaust gas expansion joint
    • Exhaust gas insulated manifolds
    • Turbocharger at counter-flywheel end
  • Fuel System
    • Fuel circulating pump (attached / for MDO/MGO only)
    • Fuel indicator filter
    • Fuel pressure valve (fitted / for MDO/MGO only)
  • Instrumentation
    • Control push buttons and lamps
    • Emergency stop lever
    • Local control panel
    • Pressure and temperature indicator
  • Lube System
    • Lube oil cooler (separate)
    • Lube oil pump (engine driven)
    • Lube oil self-cleaning filter
    • Pre-lubricating pump (electric driven / fitted on base frame)
    • Oil sump in base frame
    • Pressure regulating valve
  • Mounting System
    • Flexible pipe connections
    • High flexible coupling
    • Resilient mounting on base frame
  • Starting System
    • Electrical barring device
    • Starting air valve
  • General
    • Engine, flex. coupling and generator mounted on a common base frame
    • Flywheel cover
    • Lifting device (rental)
    • Torsional Vibration Calculation (TVC)

M 25 C Optional Equipment

  • Air Inlet System
    • Air inlet shut-off valve
    • Air intake transition piece
    • Expansion joint
    • Silencer / filter
  • Control System
    • Air injection control (for better load request)
    • Electronic speed governor
    • Engine alarm system
    • Remote indicators (start air pressure, engine speed, etc.)
    • Starter for electric driven pumps
    • 24 DC UPS
  • Cooling System
    • CW piping for generator cooliing on base frame
    • CW piping for lubricating oil cooler on base frame
    • FW/SW plate cooler
    • HT cooling water pump (electric driven)
    • HT temperature control valve fitted on base frame
    • LT cooling water pump (electric driven)
    • Sea water cooling pump (electric driven)
    • Temperature control valve
  • Exhaust System
    • Silencer (with or without spark arrester)
  • Fuel System
    • Fuel oil cooler
    • HFO final preheater
    • HFO pressure regulating valve
    • HFO self-cleaning automatic filter
    • HFO supply and booster pumps (electric driven)
    • HFO treatment and supply modules
    • HFO viscosity control device
    • Mixing tank
  • Lube System
    • Lube oil centrifuge
    • Lube oil cooler fitted on base frame
    • Lube oil pump (electrical driven)
    • Lube oil treatment and combined modules
    • Temperature control valve fitted on base frame
  • Mounting System
    • Double resilient mounting (engine and base frame)
  • Starting System
    • Starting air compressor
    • Starting air receiver
  • General
    • Engine PTO coupling
    • Generator customer supply
    • PTO shaft on counter-flywheel side

Specifications

Minimum Rating1669 kWe (2088 kVA)
Maximum Rating2877 kWe (3600 kVA)
Configuration6,8,9 Cylinder
Bore255 mm10 in
Stroke400 mm15.75 in
Swept Volume20.4 l/cyl1244.88 in³
Emissions/Fuel StrategyIMO II
Height3911 mm - 3963 mm (154.0 in - 156.0 in)
Length8070 mm - 9516 mm (317.7 in - 374.6 in)
Weight43 t - 56 t (94799 lbs - 123459 lbs)
Width2479 mm - 2534 mm ( 97.6 in - 99.8 in)

Equipment

M 25 C Standard Equipment

  • Air Inlet System
    • Air intake silencer / filter
  • Control System
    • Load sharing unit (for multiple engine plant only)
    • Protection system
    • Serial link interface (MODbus / canbus)
    • Speed governor
  • Cooling System
    • Electric cooling water preheater
    • HT cooling water pump (engine driven)
    • 2-stage charge air cooler
  • Exhaust System
    • Exhaust gas expansion joint
    • Exhaust gas insulated manifolds
    • Turbocharger at counter-flywheel end
  • Fuel System
    • Fuel circulating pump (attached / for MDO/MGO only)
    • Fuel indicator filter
    • Fuel pressure valve (fitted / for MDO/MGO only)
  • Instrumentation
    • Control push buttons and lamps
    • Emergency stop lever
    • Local control panel
    • Pressure and temperature indicator
  • Lube System
    • Lube oil cooler (separate)
    • Lube oil pump (engine driven)
    • Lube oil self-cleaning filter
    • Pre-lubricating pump (electric driven / fitted on base frame)
    • Oil sump in base frame
    • Pressure regulating valve
  • Mounting System
    • Flexible pipe connections
    • High flexible coupling
    • Resilient mounting on base frame
  • Starting System
    • Electrical barring device
    • Starting air valve
  • General
    • Engine, flex. coupling and generator mounted on a common base frame
    • Flywheel cover
    • Lifting device (rental)
    • Torsional Vibration Calculation (TVC)

M 25 C Optional Equipment

  • Air Inlet System
    • Air inlet shut-off valve
    • Air intake transition piece
    • Expansion joint
    • Silencer / filter
  • Control System
    • Air injection control (for better load request)
    • Electronic speed governor
    • Engine alarm system
    • Remote indicators (start air pressure, engine speed, etc.)
    • Starter for electric driven pumps
    • 24 DC UPS
  • Cooling System
    • CW piping for generator cooliing on base frame
    • CW piping for lubricating oil cooler on base frame
    • FW/SW plate cooler
    • HT cooling water pump (electric driven)
    • HT temperature control valve fitted on base frame
    • LT cooling water pump (electric driven)
    • Sea water cooling pump (electric driven)
    • Temperature control valve
  • Exhaust System
    • Silencer (with or without spark arrester)
  • Fuel System
    • Fuel oil cooler
    • HFO final preheater
    • HFO pressure regulating valve
    • HFO self-cleaning automatic filter
    • HFO supply and booster pumps (electric driven)
    • HFO treatment and supply modules
    • HFO viscosity control device
    • Mixing tank
  • Lube System
    • Lube oil centrifuge
    • Lube oil cooler fitted on base frame
    • Lube oil pump (electrical driven)
    • Lube oil treatment and combined modules
    • Temperature control valve fitted on base frame
  • Mounting System
    • Double resilient mounting (engine and base frame)
  • Starting System
    • Starting air compressor
    • Starting air receiver
  • General
    • Engine PTO coupling
    • Generator customer supply
    • PTO shaft on counter-flywheel side

Related Products

Loading