Jacket water pump — gear-driven, flanged single outlet
Aftercooler fresh water cooling pump — gear-drivencentrifugal
SCAC pump circuit with thermostat
Single water outlet connection
EXHAUST SYSTEM
Dry gas-tight exhaust manifolds with heat shields, dualturbochargers with water-cooled bearings and heat shields
Flexible exhaust fitting/weldable exhaust flange
FLYWHEELS & FLYWHEEL HOUSINGS
Flywheel, SAE No. 00
183 teeth
Flywheel housing, SAE No. 00
MCS approved coupling and generator hub
FUEL SYSTEM
Fuel filter — LH
Fuel transfer and priming pumps
Electronically Controlled Unit Injectors
Flexible fuel lines
Hard fuel return line for MCS requirements
INSTRUMENTATION
Graphic unit (Marine Power Display), LH for analogor digital display of: engine oil and fuel pressure,engine water temperature, system DC voltage, airinlet restriction, RH & LH exhaust temperature, oil andfuel filter differential, service meter, engine speed,instantaneous fuel consumption, total fuel consumed
Engine and generator three-point mounted into outer base
Oil drain extension
Oil drip pan
PROTECTION SYSTEM
A-III Electronic Monitoring System provides customer programmableengine de-ration strategies to protect against adverse operatingconditions
Emergency stop push button (located in Electronic Instrument Panel)Safety shutoff protection for oil pressure and water temperature, overspeed protection
Redundant start with selector switch (air-electric, air-air,air-hydraulic, or electric-hydraulic)
GENERAL
Marine Society and IMO certificates
Jacket water heaters
Specifications
Minimum Rating
639 ekW799 kV·A
Maximum Rating
779 ekW974 kV·A
Emissions
IMO Tier II
Equipment
3508C Standard Equipment
AIR INLET SYSTEM
Aftercooler core — corrosion resistant coating
Air cleaners — dual element, installed
Air inlet shutoff
CONTROL SYSTEM
Caterpillar A-III electronic engine control
Rigid wiring harness (MCS)
COOLING SYSTEM
Outlet controlled thermostat and housing
Jacket water pump — gear-driven, flanged single outlet
Aftercooler fresh water cooling pump — gear-drivencentrifugal
SCAC pump circuit with thermostat
Single water outlet connection
EXHAUST SYSTEM
Dry gas-tight exhaust manifolds with heat shields, dualturbochargers with water-cooled bearings and heat shields
Flexible exhaust fitting/weldable exhaust flange
FLYWHEELS & FLYWHEEL HOUSINGS
Flywheel, SAE No. 00
183 teeth
Flywheel housing, SAE No. 00
MCS approved coupling and generator hub
FUEL SYSTEM
Fuel filter — LH
Fuel transfer and priming pumps
Electronically Controlled Unit Injectors
Flexible fuel lines
Hard fuel return line for MCS requirements
INSTRUMENTATION
Graphic unit (Marine Power Display), LH for analogor digital display of: engine oil and fuel pressure,engine water temperature, system DC voltage, airinlet restriction, RH & LH exhaust temperature, oil andfuel filter differential, service meter, engine speed,instantaneous fuel consumption, total fuel consumed
Engine and generator three-point mounted into outer base
Oil drain extension
Oil drip pan
PROTECTION SYSTEM
A-III Electronic Monitoring System provides customer programmableengine de-ration strategies to protect against adverse operatingconditions
Emergency stop push button (located in Electronic Instrument Panel)Safety shutoff protection for oil pressure and water temperature, overspeed protection